[App_rpt-users] Dial on RPi - recompile after updates

Sat Jan 9 16:18:34 UTC 2016

More by accident than design it would seem. I have a notion to run this box
with a 2.8" touchscreen and will be trying to get X running alongside
AllStar (ever the optimist). The idea being to create a user interface for a
portable repeater / emergency box thingy. Following the instructions here
https://github.com/watterott/RPi-Display/blob/master/docu/FBTFT-Install.md
is what led to the upgrade.

I'm probably trying to sprint before I can walk :-)

Perhaps I'll start again. It only takes a few minutes to burn a fresh image.
Then I'll take smaller steps to see where I'm screwing things up.

Thanks

-----Original Message-----
From: Steve Zingman [mailto:szingman at msgstor.com] 
Sent: 09 January 2016 16:12
To: David Osborn; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates

That would explain it. How did you upgrade the kernel to 4.x?

On 01/09/2016 10:53 AM, David Osborn wrote:
> This may hold the key:
>
> "You do not appear to have the sources for the 4.0.7-v7+ kernel installed"
>
> Now all I have to do is find the aforementioned sources! An apt-cache 
> search doesn't show anything as modern as that.
>
> David
>
> -----Original Message-----
> From: Steve Zingman [mailto:szingman at msgstor.com]
> Sent: 09 January 2016 15:11
> To: David Osborn; app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
>
> David,
> Not sure why you are getting the error. Lets go further. Worst case, 
> you have to reload the image.
> verify you have dahdi-linux-complete-current.tar.gz in /srv/download if
not:
> cd /srv/download
> wget
> https://github.com/N4IRS/AllStar/raw/master/dahdi-linux-complete-curre
> nt.tar
> .gz
> cd /usr/src/astsrc-1.4.23-pre
> rm -rf dahdi-linux-complete
> tar zxvf /srv/download/dahdi-linux-complete-current.tar.gz
> mv dahdi-linux-complete* dahdi-linux-complete 
> /srv/scripts/build_dahdi.sh
>
> Steve
>
> On 01/09/2016 09:59 AM, David Osborn wrote:
>> Thank you so much for the swift response, Steve. That's really
> appreciated.
>> Unfortunately it's still in the wars :-(
>>
>> root at pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete# 
>> make clean make -C linux clean
>> make[1]: Entering directory
>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
>> make -C drivers/dahdi/firmware clean
>> make[2]: Entering directory
>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/
>> f
>> irmwar
>> e'
>> rm -f dahdi-fw-*.o
>> make[2]: Leaving directory
>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/
>> f
>> irmwar
>> e'
>> make -C
>> M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahd
>> i
>> /oct61
>> 2x' clean
>> make[2]: Entering directory
>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
>> make[2]: ***
>> M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi
>> /
>> oct612
>> x: No such file or directory.  Stop.
>> make[2]: Leaving directory
>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
>> Makefile:179: recipe for target 'clean' failed
>> make[1]: *** [clean] Error 2
>> make[1]: Leaving directory
>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
>> Makefile:14: recipe for target 'clean' failed
>> make: *** [clean] Error 2
>>
>> I fell at the first hurdle. The directory oct612x does exist, 
>> however, and it contains files.
>>
>> Any thoughts?
>>
>>
>> -----Original Message-----
>> From: Steve Zingman [mailto:szingman at msgstor.com]
>> Sent: 09 January 2016 14:51
>> To: David Osborn; app_rpt-users at ohnosec.org
>> Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
>>
>> David,
>> cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
>> make clean
>> make all
>> make install
>> make config
>>
>> 73, Steve N4IRS
>>
>> On 01/09/2016 09:46 AM, David Osborn wrote:
>>> Hi all,
>>>
>>> I downloaded and installed the DIAL image for the RPi2 and it went 
>>> in a treat. Great work guys!
>>>
>>> What I did next broke it, but it is something that we all have to do 
>>> and I've done it many times with my Acid installs: I did an update 
>>> to the system.
>>>
>>> Just as with Acid, the updates broke Asterisk and it craps out after 
>>> a few
>>> tries:
>>>
>>> [Jan  9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
>>> '/dev/dahdi/pseudo': No such file or directory [Jan  9 14:34:48] 
>>> ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or 
>>> directory [Jan  9 14:34:48] WARNING[301] chan_simpleusb.c: File 
>>> simpleusb_tune_usb.conf not found, device usb using default parameters.
>>> [Jan  9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread 
>>> restarts, killing Asterisk
>>>
>>> I am guessing that Asterisk etc needs to be re-compiled. How do I go 
>>> about this? I tried running the rpi2 install script at 
>>> https://github.com/N4IRS/AllStar and answered "n" to repeated 
>>> queries about patches. Compilation appeared to succeed, but Asterisk 
>>> still dies on
>> me.
>>> Thanks again for the work on this. I'm most impressed with the RPI2!
>>>
>>> David Osborn
>>> GD4HOZ
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>

--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic