[App_rpt-users] Dial on RPi - recompile after updates

Sat Jan 9 16:25:09 UTC 2016

I'll carry on hacking. Thanks for trying.

In parting, see what these dudes are up to - you'll love it! (It's what I'd
like to do with a Pi)

http://www.feednet.org.uk/repeater.htm

David

-----Original Message-----
From: Steve Zingman [mailto:szingman at msgstor.com] 
Sent: 09 January 2016 16:23
To: David Osborn; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates

OK,
The first thing I checked that apt-get upgrade did not upgrade the kernel.
You should be able to add X to DIAL. I can't say I've done it. 
The touch screen display sounds fun. Good luck and feel free to ask for
anything. That's why it's a hobby.

73, Steve N4IRS

On 01/09/2016 11:18 AM, David Osborn wrote:
> More by accident than design it would seem. I have a notion to run 
> this box with a 2.8" touchscreen and will be trying to get X running 
> alongside AllStar (ever the optimist). The idea being to create a user 
> interface for a portable repeater / emergency box thingy. Following 
> the instructions here 
> https://github.com/watterott/RPi-Display/blob/master/docu/FBTFT-Instal
> l.md
> is what led to the upgrade.
>
> I'm probably trying to sprint before I can walk :-)
>
> Perhaps I'll start again. It only takes a few minutes to burn a fresh
image.
> Then I'll take smaller steps to see where I'm screwing things up.
>
> Thanks
>
>
> -----Original Message-----
> From: Steve Zingman [mailto:szingman at msgstor.com]
> Sent: 09 January 2016 16:12
> To: David Osborn; app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
>
> That would explain it. How did you upgrade the kernel to 4.x?
>
> On 01/09/2016 10:53 AM, David Osborn wrote:
>> This may hold the key:
>>
>> "You do not appear to have the sources for the 4.0.7-v7+ kernel
installed"
>>
>> Now all I have to do is find the aforementioned sources! An apt-cache 
>> search doesn't show anything as modern as that.
>>
>> David
>>
>> -----Original Message-----
>> From: Steve Zingman [mailto:szingman at msgstor.com]
>> Sent: 09 January 2016 15:11
>> To: David Osborn; app_rpt-users at ohnosec.org
>> Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
>>
>> David,
>> Not sure why you are getting the error. Lets go further. Worst case, 
>> you have to reload the image.
>> verify you have dahdi-linux-complete-current.tar.gz in /srv/download 
>> if
> not:
>> cd /srv/download
>> wget
>> https://github.com/N4IRS/AllStar/raw/master/dahdi-linux-complete-curr
>> e
>> nt.tar
>> .gz
>> cd /usr/src/astsrc-1.4.23-pre
>> rm -rf dahdi-linux-complete
>> tar zxvf /srv/download/dahdi-linux-complete-current.tar.gz
>> mv dahdi-linux-complete* dahdi-linux-complete 
>> /srv/scripts/build_dahdi.sh
>>
>> Steve
>>
>> On 01/09/2016 09:59 AM, David Osborn wrote:
>>> Thank you so much for the swift response, Steve. That's really
>> appreciated.
>>> Unfortunately it's still in the wars :-(
>>>
>>> root at pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete#
>>> make clean make -C linux clean
>>> make[1]: Entering directory
>>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
>>> make -C drivers/dahdi/firmware clean
>>> make[2]: Entering directory
>>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi
>>> /
>>> f
>>> irmwar
>>> e'
>>> rm -f dahdi-fw-*.o
>>> make[2]: Leaving directory
>>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi
>>> /
>>> f
>>> irmwar
>>> e'
>>> make -C
>>> M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dah
>>> d
>>> i
>>> /oct61
>>> 2x' clean
>>> make[2]: Entering directory
>>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
>>> make[2]: ***
>>> M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahd
>>> i
>>> /
>>> oct612
>>> x: No such file or directory.  Stop.
>>> make[2]: Leaving directory
>>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
>>> Makefile:179: recipe for target 'clean' failed
>>> make[1]: *** [clean] Error 2
>>> make[1]: Leaving directory
>>> '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux'
>>> Makefile:14: recipe for target 'clean' failed
>>> make: *** [clean] Error 2
>>>
>>> I fell at the first hurdle. The directory oct612x does exist, 
>>> however, and it contains files.
>>>
>>> Any thoughts?
>>>
>>>
>>> -----Original Message-----
>>> From: Steve Zingman [mailto:szingman at msgstor.com]
>>> Sent: 09 January 2016 14:51
>>> To: David Osborn; app_rpt-users at ohnosec.org
>>> Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
>>>
>>> David,
>>> cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete
>>> make clean
>>> make all
>>> make install
>>> make config
>>>
>>> 73, Steve N4IRS
>>>
>>> On 01/09/2016 09:46 AM, David Osborn wrote:
>>>> Hi all,
>>>>
>>>> I downloaded and installed the DIAL image for the RPi2 and it went 
>>>> in a treat. Great work guys!
>>>>
>>>> What I did next broke it, but it is something that we all have to 
>>>> do and I've done it many times with my Acid installs: I did an 
>>>> update to the system.
>>>>
>>>> Just as with Acid, the updates broke Asterisk and it craps out 
>>>> after a few
>>>> tries:
>>>>
>>>> [Jan  9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open
>>>> '/dev/dahdi/pseudo': No such file or directory [Jan  9 14:34:48] 
>>>> ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or 
>>>> directory [Jan  9 14:34:48] WARNING[301] chan_simpleusb.c: File 
>>>> simpleusb_tune_usb.conf not found, device usb using default parameters.
>>>> [Jan  9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread 
>>>> restarts, killing Asterisk
>>>>
>>>> I am guessing that Asterisk etc needs to be re-compiled. How do I 
>>>> go about this? I tried running the rpi2 install script at 
>>>> https://github.com/N4IRS/AllStar and answered "n" to repeated 
>>>> queries about patches. Compilation appeared to succeed, but 
>>>> Asterisk still dies on
>>> me.
>>>> Thanks again for the work on this. I'm most impressed with the RPI2!
>>>>
>>>> David Osborn
>>>> GD4HOZ
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>>> down to the bottom of the page. Enter your email address and press 
>>> the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a 
>>> message to the list detailing the problem.
>>>
>>> --
>>> "Anything is possible if you don't know what you are talking about."
>>> 1st Law of Logic
>>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>

--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic