[App_rpt-users] Garmin GPS18x no longer compatible with RTCM

[Andrew Sylthe]

Hello James,

SparkFun sells a $2.95 Logic Level Converter that may provide a solution
for people that still want to use the Garmin units.
https://www.sparkfun.com/products/12009

Thanks!

On Tue, Jan 26, 2016 at 1:44 PM, James Cizek <james.m.cizek at gmail.com>
wrote:

> Hi folks,
>
> Wanted to get this out to you before anyone else bought one thinking they
> would work (since this model is specifically called out in the RTCM docs).
>
> When using a GPS with a Micro-node RTCM for voting,  you need to find one
> that has a 5 volt Pulse-per-second output.  The Garmin lines that is
> recommended (GPS 18X, 18X lvc, etc...)
> NO LONGER do this!
>
> This is what I got back from Garmin:
>
> Mr. Cizek,
>
>
>
> I was just told there was a design change with the GPS 18x LVC. The PPS
> signal voltage is now 3V. This was something we were not told until today.
> We will be making the changes to the online Technical Specifications to
> reflect this change.
>
> I do apologize for the inconvenience. This was a change we were not
> informed of.
>
>
> So this line of GPS's will *NOT* work with an RTCM any longer.  Talking to
> Mark at Micro-node, there is a voltage divider in the RTCM dropping the 5
> volt to 3.3 volt to be compatible with the CPU.  With only 3 volts on the
> incoming line, there isn't enough making it to the CPU to trigger a state
> change and you will get "PPS Timeout" errors and be unable to achieve GPS
> lock.
>
>
> I am not sure what kind of timing skew a level converter would introduce,
> so it's probably a better bet to just get a GPS that has a 5 volt line
> (Trimble Thunderbolt or the similar).
>
>
> There may be a possibility of removing or modifying the voltage divider
> inside as well, but without schematics, and unless you have SMD capable
> gear, it's unlikely that that is a good solution.
>
>
> Just wanted to let folks know so they don't repeat the brain damage I just
> went through figuring this out :)
>
>
> 73
>
> James
>
> KI0KN
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Andrew Sylthe
KC9ONA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160126/4a2273eb/attachment.html>