[App_rpt-users] Question regarding echolink setup

[mike at midnighteng.com]

If you have been testing this and not seeing it work,
Know that you can only have one connection per ip address
no matter the type/callsign.

You may need to log-out from your desktop if your app_rpt is on the same ip.
And you 'may' need to restart app_rpt after doing so.
It can take a few minutes for it to registrar.

Perhaps that will lead you somewhere.

...mike/kb8jnm

> I am new to Allstar and am attempting to get the echolink node ID/PSWD combination
> to work.  It works as I can bring up Echolink in sysop mode under the profile for
> the repeater.  I believe I configured it correctly in the setup on the Allstarlink
> website and in the setup on the local node as well.  I am not sure where to look or
> what else I might need to do to get the echolink aspect up and running, any
> direction would be great.
>
> Thanks,
>
> 73, Greg, W2GCM
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.
>