[App_rpt-users] usbfobs

[Greg Stahlman]

One thing to check on these, the one I had did NOT have a common ground (Sleeve) between the in and out ports.  One was actual DC ground, the other had 3.x VDC on it and you could NOT tie the two together!  I used the actual ground as “common” for in and out and it worked fine.

 

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of ssedgwick
Sent: Saturday, July 09, 2016 2:42 PM
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] usbfobs

 

Last Sunday I wrote that I had purchase a few sound dongles from bargain cable USA when they sold them on eBay.  They no longer sell them on eBay, but they do still sell a USB sound dongle on there website here: http://www.bargaincableusa.com/virtual-7-1-channel-sound-card-mic-in-stereo-out-p/a-229.htm  for $3.98 with free shipping.  I ordered one last Sunday and received it today.  It’s not exactly like the one’s I purchased earlier from them, but it does have a soldered chip that can be soldered too.  I took some pictures and uplinked them here:        

https://dl.dropboxusercontent.com/u/49683698/USB%20sound%20dongle/2016-07-09%2013.53.40.jpg

https://dl.dropboxusercontent.com/u/49683698/USB%20sound%20dongle/2016-07-09%2013.56.39.jpg

https://dl.dropboxusercontent.com/u/49683698/USB%20sound%20dongle/2016-07-09%2013.56.57.jpg

https://dl.dropboxusercontent.com/u/49683698/USB%20sound%20dongle/2016-07-09%2013.57.08.jpg

https://dl.dropboxusercontent.com/u/49683698/USB%20sound%20dongle/2016-07-09%2015.48.48.jpg

https://dl.dropboxusercontent.com/u/49683698/USB%20sound%20dongle/2016-07-09%2015.49.11.jpg

 

The chip on the PCB has no marking that I could see.  I modified the USB sound dongle by soldering a red 30 ga wirewrap wire to pin 13 of the chip and a white 30 ga wirewrap to the volume down switch (same as pin 48 of the chip).  I connected a set of headphone with built-in boom mic to the mic and audio output 1/8 jacks and test it on one of my spare Allstar nodes and it worked fine.  Grounding pin 48 caused the node to keyup as expected.  When the node was keyed from another node, pin 13 switches from 0 VDC to 3.21 VDC as expected. Microphone in and audio out worked as expected.  I did no further testing.

 

So at this point I can say the dongle I received worked to the extent I tested above on Allstar.  Of course YMMV.

 

If another purchases any of these sound dongles, please post your results when you receive them.  As I typed this message at 4:30 PM central time on July 9 their website said they have 485 of these sound dongles in stock.

 

BTW, I have no affiliation with bargain cable USA in any way except that I purchased a few USB dongles from them.

 

Good luck,

73,

Steve_WB8GRS



__________ Information from ESET NOD32 Antivirus, version of virus signature database 13778 (20160709) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 13778 (20160709) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160709/13e77a40/attachment.html>