[App_rpt-users] A and B audio output from USB fob on a RPi running DIAL

[Steve Zingman]

I am without a problem. What result are you getting?

On 07/10/2016 10:04 AM, Ramesh Dhami wrote:
> Hi All:
>
> I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
>
> I was able to get 2 'discrete' audio outputs when running ACID on a PC.  This doesn't seem to be working with the Pi / DIAL.  Is anyone running this configuration on a Pi?
>
> Thx,
>
> Ramesh.
>
> # 27919 and a truck load of others!
>
> Sent from my iPhone
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic