[App_rpt-users] 2 nodes under the same IP

[Philip Dorr]

You may need to setup hairpin NAT.
http://wiki.mikrotik.com/wiki/Hairpin_NAT

On Wed, Jul 13, 2016 at 8:35 PM, Skyler F <electricity440 at gmail.com> wrote:

> I have two separate boxes, one node on port 4570 and the other on 4569.
> They can both take inbound and outbound calls, however, they can't connect
> to each other. I don't know if it is the mikrotik router, or the way
> Mountain BB is configured, but a loopback call can not be made.
>
> Is there any solution to fix this without assigning private nodes?
>
> 73
> Skyler
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160713/52b024d5/attachment.html>