[App_rpt-users] Node 2424 - Bridgecom 220 Repeater is LIVE!

[Steve Zingman]

But after a asterisk restart you do see it on the status page?

On 7/15/2016 12:50 PM, Ramesh Dhami (VA3UV) wrote:
> On 7/15/2016 12:37 PM, Steve Zingman wrote:
>> Ramesh,
>> I assume from the asterisk cli prompt iax2 show registry looks 
>> something like this:
>>
>> Host                  dnsmgr  Username    Perceived Refresh State
>> 67.215.233.178:4569   N       2148        208.35.139.11:4569 60 
>> Registered
>>
>> Exit the CLI
>>
>> cd /etc/asterisk
>> wget https://github.com/N4IRS/AllStar/raw/master/configs/dnsmgr.conf
>>
>> restart asterisk
>>
> Hi Steve:
>
> Followed your recommendation above; after 5 mins or so, I still do not 
> see my nodes on the status page (or appearing as active via node 
> status in the Portal)
>
> iax2 show registry shows:
>
> Host                  dnsmgr  Username    Perceived Refresh  State
> 67.215.233.178:4569   Y       2424        208.124.214.227:4568 60 
> Registered
> 67.215.233.178:4569   Y       2182        208.124.214.227:4568 60 
> Registered
>
>
> Cheers,
>
> Ramesh.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic