[App_rpt-users] trouble connecting

[David McGough]

Hi George,

The most recent rpt_extnode lists still show you using port 4569.

If you've switch the asterisk software and router at your end to 4570 (or 
something else), you need to also change the port used in the web portal 
(https://allstarlink.org/ ).

73, David KB4FXC



On Sat, 16 Jul 2016, George Csahanin wrote:

> Still some nodes that show online that I cannot connect to but I may 
> have messed up something with the node list download in my hacking. The 
> one I have been able to connect to has an entry in rpt.conf. But at 
> least that connection is up, and it is the normal config.
> 
> 
> Thanks
> 
> 
> GeorgeC
> 
> 
> On 7/16/2016 10:04 AM, Steve Zingman wrote:
> > Great.
> > Glad you are up and running.
> >
> > 73, Steve N4IRS
> >
> > On 07/16/2016 10:02 AM, George Csahanin wrote:
> >>
> >> Steve, I just started poking in the router and saw that Verizon has 
> >> services on port 4567, and took a wild guess that they may be 
> >> blocking some stuff. Moved my node to 4570 and it all works. Just 
> >> about 5 minutes ago.
> >>
> >>
> >> Go figure.
> >>
> >>
> >> GeorgeC
> >>
> >>
> >> On 7/16/2016 9:52 AM, Steve Zingman wrote:
> >>> George,
> >>> What is the result of the Asterisk CLI command: iax2 show registry
> >>>
> >>> Lets start there
> >>>
> >>> On 07/16/2016 09:48 AM, George Csahanin wrote:
> >>>> Stumped, maybe because I've played with this stuff a lot over the 
> >>>> last 7 years...but...my ISP just changed my IP address. No longer 
> >>>> can connect to anything and the last extnodes file was right before 
> >>>> they made the change Thursday night. Might have been Wednesday, 
> >>>> doesn't matter. There was nothing to change in the rpt.conf file, 
> >>>> everything looks normal except the only obvious thing is that I'm 
> >>>> not seeing rpt_extnodes updating. I put an entry in rpt.conf for a 
> >>>> node I normally connect to (27891) and get /__auto_congest: 
> >>>> Auto-congesting call due to slow response//
> >>>> /Checked port forwarding rules on the Verizon router, and is 
> >>>> normal. I also *can* connect to usual nodes via the echolink 
> >>>> port./(W8VT is 27849 and 606945 echo. echo works)
> >>>>
> >>>> /Really stumped but operating under a medically induced handicap 
> >>>> (fever). Anybody have any words of wisdom as to what I may be 
> >>>> overlooking. Worked fine until Verizon re-did everything that night. /
> >>>>
> >>>> /Again, thanks for bearing with me but this bug has me down and 
> >>>> this isn't looking too clear to me.
> >>>>
> >>>> GeorgeC
> >>>> W2DB
> >>>> 2360/
> >>>>
> >>>> /
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> App_rpt-users mailing list
> >>>> App_rpt-users at ohnosec.org
> >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>>
> >>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> >>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> >>>
> >>> -- 
> >>> "Anything is possible if you don't know what you are talking about."
> >>> 1st Law of Logic
> >>
> >
> > -- 
> > "Anything is possible if you don't know what you are talking about."
> > 1st Law of Logic
> 
>