[App_rpt-users] trouble connecting
David McGough
kb4fxc at inttek.net
Sat Jul 16 15:48:40 UTC 2016
Hi George,
Ouch! Sorry to hear that. Yes, you've got to be very careful initiating a
config download from the web portal since that operation will wipe your
local changes out.
73, David KB4FXC
On Sat, 16 Jul 2016, George Csahanin wrote:
> Can't leave well enough alone.
>
>
> OK, downloaded the config from allstar to my box, asterisk runs, doesn't
> talk to the radio...
>
>
> Arrrrrrrghh!
>
>
> GeorgeC
>
>
> On 7/16/2016 10:28 AM, David McGough wrote:
> > Hi George,
> >
> > The most recent rpt_extnode lists still show you using port 4569.
> >
> > If you've switch the asterisk software and router at your end to 4570 (or
> > something else), you need to also change the port used in the web portal
> > (https://allstarlink.org/ ).
> >
> > 73, David KB4FXC
> >
> >
> >
> > On Sat, 16 Jul 2016, George Csahanin wrote:
> >
> >> Still some nodes that show online that I cannot connect to but I may
> >> have messed up something with the node list download in my hacking. The
> >> one I have been able to connect to has an entry in rpt.conf. But at
> >> least that connection is up, and it is the normal config.
> >>
> >>
> >> Thanks
> >>
> >>
> >> GeorgeC
> >>
> >>
> >> On 7/16/2016 10:04 AM, Steve Zingman wrote:
> >>> Great.
> >>> Glad you are up and running.
> >>>
> >>> 73, Steve N4IRS
> >>>
> >>> On 07/16/2016 10:02 AM, George Csahanin wrote:
> >>>> Steve, I just started poking in the router and saw that Verizon has
> >>>> services on port 4567, and took a wild guess that they may be
> >>>> blocking some stuff. Moved my node to 4570 and it all works. Just
> >>>> about 5 minutes ago.
> >>>>
> >>>>
> >>>> Go figure.
> >>>>
> >>>>
> >>>> GeorgeC
> >>>>
> >>>>
> >>>> On 7/16/2016 9:52 AM, Steve Zingman wrote:
> >>>>> George,
> >>>>> What is the result of the Asterisk CLI command: iax2 show registry
> >>>>>
> >>>>> Lets start there
> >>>>>
> >>>>> On 07/16/2016 09:48 AM, George Csahanin wrote:
> >>>>>> Stumped, maybe because I've played with this stuff a lot over the
> >>>>>> last 7 years...but...my ISP just changed my IP address. No longer
> >>>>>> can connect to anything and the last extnodes file was right before
> >>>>>> they made the change Thursday night. Might have been Wednesday,
> >>>>>> doesn't matter. There was nothing to change in the rpt.conf file,
> >>>>>> everything looks normal except the only obvious thing is that I'm
> >>>>>> not seeing rpt_extnodes updating. I put an entry in rpt.conf for a
> >>>>>> node I normally connect to (27891) and get /__auto_congest:
> >>>>>> Auto-congesting call due to slow response//
> >>>>>> /Checked port forwarding rules on the Verizon router, and is
> >>>>>> normal. I also *can* connect to usual nodes via the echolink
> >>>>>> port./(W8VT is 27849 and 606945 echo. echo works)
> >>>>>>
> >>>>>> /Really stumped but operating under a medically induced handicap
> >>>>>> (fever). Anybody have any words of wisdom as to what I may be
> >>>>>> overlooking. Worked fine until Verizon re-did everything that night. /
> >>>>>>
> >>>>>> /Again, thanks for bearing with me but this bug has me down and
> >>>>>> this isn't looking too clear to me.
> >>>>>>
> >>>>>> GeorgeC
> >>>>>> W2DB
> >>>>>> 2360/
> >>>>>>
> >>>>>> /
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> App_rpt-users mailing list
> >>>>>> App_rpt-users at ohnosec.org
> >>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>>>>
> >>>>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> >>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> >>>>> --
> >>>>> "Anything is possible if you don't know what you are talking about."
> >>>>> 1st Law of Logic
> >>> --
> >>> "Anything is possible if you don't know what you are talking about."
> >>> 1st Law of Logic
> >>
> >
>
>
More information about the App_rpt-users
mailing list