[App_rpt-users] Outbound call problem! Unable to handle indication 13

[Eric Meth]

Do you have the first line in your NAT Firewall rules of srcnat ---- 
action=masquarade ?

You can do this in firewall-nat in winbox or command line

Eric - ve3ei


On 17/07/2016 11:24 PM, Skyler F wrote:
> A third note, I am able to connect to other AllStar nodes that are not 
> on ports 4569 or 4570 (the ports I use for AllStar link)
>
>
> On Sun, Jul 17, 2016 at 8:59 PM, Skyler F <electricity440 at gmail.com 
> <mailto:electricity440 at gmail.com>> wrote:
>
>     Another note, If I turn off the port forwarding on the router
>     under the NAT menu, I can now only get outbound connections,
>     however inbound connections don't work.
>
>     So if I turn my firewall rules off, outbound all the sudden starts
>     working.
>
>
>     On Sun, Jul 17, 2016 at 8:30 PM, Skyler F
>     <electricity440 at gmail.com <mailto:electricity440 at gmail.com>> wrote:
>
>         This is my first time using the MikroTik router, and I don't
>         know what I could have wrong in the outbound NAT of my
>         router.  Can anybody give me an idea of where to look in
>         winbox or routerOS to see what is wrong?
>
>         Skyler
>
>
>         On Sun, Jul 17, 2016 at 7:58 PM, David McGough
>         <kb4fxc at inttek.net <mailto:kb4fxc at inttek.net>> wrote:
>
>
>
>             Skyler,
>
>             Indication 13 is a AST_CONTROL_RADIO_UNKEY message. I
>             think that's just a
>             side effect of the out-bound connection not getting
>             established properly.
>
>             I think you've got a out-bound NAT configuration issue on
>             the MikroTik.
>
>
>             73, David KB4FXC
>
>
>             On Sun, 17 Jul 2016, Skyler F wrote:
>
>             > So I try to make an outbound call on my AllStar machine
>             under a mikrotik
>             > router, and I get "Connection Failed". The
>             /tmp/rpt_extnodes is fine, and
>             > it is reporting to AllStars nodelist and the stats
>             server. Iax2 show
>             > registry is good.
>             >
>             > When I make an inbound connection to the node, it
>             connects right up,
>             > however, when I make an outbound conenction, I get this
>             big error on any
>             > node  :
>             >
>             > channel.c:2447 ast_indicate_data: Unable to handle
>             indication 13 for
>             > 'IAX2/173.82.59.253:4569-10526'
>             >
>             > The strange thing is that if an initial inbound
>             connection is made, it is
>             > fine for outbound connections on that particular node
>             number.
>             >
>             >
>             > So,
>             >
>             > 1) no outbound, only inbound AllStar connections
>             > 2) Outbound works to the particular node only if an
>             initial inbound
>             > connection is made.
>             >
>             > This problem just started, and I have no idea what would
>             be causing it. I
>             > DO have two nodes on the same IP, they are on different
>             ports and I have
>             > the ports forwarded to the specefic devices respectively.
>             > 73
>             > Skyler KD0WHB
>             >
>             >
>             >
>
>
>
>
>         -- 
>         Skyler Fennell
>         amsatnet.info <http://amsatnet.info>
>         KDØWHB
>         electricity440 at gmail.com <mailto:electricity440 at gmail.com>
>
>
>
>
>     -- 
>     Skyler Fennell
>     amsatnet.info <http://amsatnet.info>
>     KDØWHB
>     electricity440 at gmail.com <mailto:electricity440 at gmail.com>
>
>
>
>
> -- 
> Skyler Fennell
> amsatnet.info <http://amsatnet.info>
> KDØWHB
> electricity440 at gmail.com <mailto:electricity440 at gmail.com>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160718/9467ac42/attachment.html>