[App_rpt-users] Macro handling

[Steve Agee]

No, it wont, because once it reads 423 it can execute it, and so it does 
and stops reading in digits. So, it will never reach 4231. What would 
work is if you changed 423 to 4230 or 4232.

N5ZUA

On 7/26/2016 3:27 PM, Stephen - K1LNX wrote:
> Will macros take more than two digits? I am starting to play around 
> with them (and admittedly not a ton of experience), but I can't get 
> the following to work for whatever reason:
>
> [2376]
> macro = macro
>
> [functions]
> ; Macro Commands
> 423 = macro,1
> 4231 = macro,2
>
> [macro]
> ; connect to NETDA Hub 28741
> 1 = *328741#
> 2 = *128741#
>
> Does this look right and should it work? I did restart Asterisk/did an 
> rpt reload etc, but no change. If I dial (or send from the CLI) *423, 
> I expect it to connect to my hub nobe, *4231 to disconnect, but it 
> does not work.
>
> 73
> Stephen
> K1LNX
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160726/2c46cbea/attachment.html>