[App_rpt-users] Remote control does not work if functions stanza is changed

[David McGough]

Skyler,

Okay about being connected and still no-go.

Are nodes 1001 and 1002 on the same host or different hardware?

73, David KB4FXC


On Tue, 31 May 2016, Skyler F wrote:

> David,
> 
> I do have the nodes connected together. The only difference is the name of
> the functions stanza.
> 
> 
> 
> On Tue, May 31, 2016 at 7:27 PM, David McGough <kb4fxc at inttek.net> wrote:
> 
> >
> > Do you have node 1002 connected to 1001 before issuing the remote command
> > from to 1001 from 1002? The nodes must be connected for remote commands to
> > work.
> >
> > Also, I don't think it's saying "I OWN COMMAND" ....Rather, it's saying:
> >
> > https://www.youtube.com/watch?v=0ccKPSVQcFk
> >
> >
> > 73, David KB4FXC
> >
> > On Tue, 31 May 2016, Skyler F wrote:
> >
> > > Is this a bug or am I not supposed to do this in app_rpt? :
> > >
> > > Under my node this works fine:
> > >
> > > [1001]
> > > functions = functions
> > >
> > > [functions]
> > > DTMF stuff here
> > >
> > > IF I do this however,
> > >
> > > [1001]
> > > functions = functionsVHF
> > >
> > > [functionsVHF]
> > > DTMF stuff here
> > >
> > > Everything works EXCEPT if I do a remote command from another node, so
> > if I
> > > am on node 1002 and do *41001, it will say "I OWN COMMAND" but I can not
> > > execute any DTMF successfully. If I do *41999 *70, I don't hear Allison's
> > > pretty voice :-(
> > >
> > >
> > > 73
> > > Skyler KD0WHB
> > >
> >
> >
> 
> 
>