[App_rpt-users] Reverse AutoPatch
JJC
cummingsj at gmail.com
Thu Mar 31 20:11:32 UTC 2016
== Parked SIP/<obfuscated>-76904e08 on 701 at parkedcalls. Will timeout back
to extension [custom-gv-answer] s, 2 in 45 seconds
-- Added extension '701' priority 1 to parkedcalls
-- Call Parking Called, lot: 701, timeout: 0, context: (null)
-- Music class default requested but no musiconhold loaded.
-- Music class default requested but no musiconhold loaded.
-- <DAHDI/pseudo-1661934131> Playing 'rpt/node' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'digits/4' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'digits/3' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'digits/2' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'digits/6' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'digits/5' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'rpt/in-call' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'digits/0' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'digits/7' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'digits/0' (language 'en')
-- <DAHDI/pseudo-1661934131> Playing 'digits/1' (language 'en')
-- Hungup 'DAHDI/pseudo-1661934131'
[Mar 31 14:09:08] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char * duration 84 ms
[Mar 31 14:09:08] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char 6 duration 85 ms
[Mar 31 14:09:09] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char 1 duration 86 ms
[Mar 31 14:09:09] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char 0 duration 85 ms
[Mar 31 14:09:10] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char 7 duration 86 ms
[Mar 31 14:09:10] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char 0 duration 84 ms
[Mar 31 14:09:10] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char 1 duration 127 ms
-- Hungup 'DAHDI/pseudo-176387851'
== SIP/<obfuscated>-76904e08 got tired of being parked
[Mar 31 14:09:23] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char * duration 86 ms
[Mar 31 14:09:23] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char 6 duration 79 ms
[Mar 31 14:09:24] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got DTMF
char 2 duration 106 ms
-- Hungup 'DAHDI/pseudo-959605867'
-- Hungup 'DAHDI/pseudo-1384624454'
-- Hungup 'DAHDI/pseudo-1284356810'
On Thu, Mar 31, 2016 at 2:05 PM, Jim Duuuude <telesistant at hotmail.com>
wrote:
> Then it should be "*610701", since the autopatch acccess is *61, in your
> case.
>
>
> Could you "set verbose 4", make a couple of calls, attempting to answer,
> and send me the output so
>
> that I can see what it is doing?
>
>
> ------------------------------
> *From:* JJC <cummingsj at gmail.com>
> *Sent:* Thursday, March 31, 2016 9:08 AM
>
> *To:* Jim Duuuude
> *Cc:* app_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>
> This is what I had thought from what I could find online. My
> features.conf is the default and I have not modified the section of the
> extensions.conf. I cannot find any stanza for the "parkedcalls" context
> reference in features.conf. When the call comes in, the system does
> announce that there is an inbound call on the defined Node and extension of
> 0701. I have tried also *610701 etc... just given that *61 brings
> autopatch up to dailtone..
>
>
>> $ grep '^6' *
>> rpt.conf:61 = autopatchup,noct = 1,farenddisconnect = 1,dialtime = 20000
>> ; Autopatch up
>> rpt.conf:62 = autopatchdn
>> ; Autopatch down
>> rpt.conf:67 = remote,210 ; Send a *
>> rpt.conf:69 = remote,211 ; Send a #
>
>
>> $ grep -i park *
>> chan_dahdi.conf:; Also enables call parking (overrides the 'canpark'
>> parameter)
>> chan_dahdi.conf:; Allow call parking
>> chan_dahdi.conf:; ('canpark=no' is overridden by 'transfer=yes')
>> chan_dahdi.conf:canpark=yes
>> extensions.conf:exten =>
>> s,1,Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75
>> extensions.conf:exten = _07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
>> extensions.conf:exten =>
>> _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120)
>> features.conf:; Sample Call Features (parking, transfer, etc)
>> configuration
>> features.conf:parkext => 700 ; What extension to dial to park
>> features.conf:parkpos => 701-720 ; What extensions to park calls on.
>> These needs to be
>> features.conf: ; and increments with one for the next parked call.
>> features.conf:context => parkedcalls ; Which context parked calls are in
>> modules.conf:load => app_parkandannounce.so ; Call Parking and Announce
>> Application
>
>
> repeater*CLI> dialplan show custom-gv-answer
>> [ Context 'custom-gv-answer' created by 'pbx_config' ]
>> 's' => 1.
>> Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) [pbx_config]
>> 2. Hangup()
>> [pbx_config]
>> -= 1 extension (2 priorities) in 1 context. =-
>
>
> <features.conf>
> [general]
> parkext => 700 ; What extension to dial to park
> parkpos => 701-720 ; What extensions to park calls on. These
> needs to be
> ; numeric, as Asterisk starts from the
> start position
> ; and increments with one for the next
> parked call.
> context => parkedcalls ; Which context parked calls are in
>
> <extensions.conf snip>
> [radio]
> exten = _X11,1,Goto(check_route|${EXTEN}|1);
> exten = _NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1)
> exten = _1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1)
> exten = _07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
> exten = 00,1,Goto(my-ip|s|1)
>
> On Wed, Mar 30, 2016 at 11:05 PM, Jim Duuuude <telesistant at hotmail.com>
> wrote:
>
>> 701 is meant to un-park call parked in parking lot 1 in Asterisk.
>>
>> If your autopatch access code is *6, then *6 plus what it tells
>>
>> you to dial (0701) should work, if you have the call parking configured
>>
>> correctly (see features.conf), and accessed in the autopatch's
>>
>> Asterisk dialplan, as is in the default extensions.conf:
>>
>>
>> exten=_07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
>>
>>
>> In the default config that is shipped with ACID, this is how it is set up
>>
>> already.
>>
>>
>> Jim
>>
>>
>>
>>
>> ------------------------------
>> *From:* JJC <cummingsj at gmail.com>
>> *Sent:* Wednesday, March 30, 2016 8:25 PM
>>
>> *To:* Jim Duuuude
>> *Cc:* app_rpt-users at ohnosec.org
>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>
>> It is now at the point where it announces there is an incoming call but
>> none of the commands that I have found seem to be working.. trying:
>>
>> *60701
>> *6701
>>
>> I also changed the extension from 701 to s with the same results (while
>> removing the /701 from the register line), removed the Answer() directive
>>
>> <sip.conf>
>> register=USER:<obfuscated>@THING/701
>>
>> [THING]
>> type=peer
>> allowguest=yes
>> autocreatepeer=yes
>> insecure=port,invite
>> username=THING
>> secret=<obfuscated>
>> host=gvgw.simonics.com
>> qualify=no
>> allowexternaldomains=yes
>> context=custom-gv-answer
>>
>> <extensions.conf>
>> [custom-gv-answer]
>> exten => 701,1,Answer()
>> exten => 701,n,Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120)
>> 75
>> exten => 701,n,Hangup
>>
>> On Wed, Mar 30, 2016 at 6:34 PM, JJC <cummingsj at gmail.com> wrote:
>>
>>> It's all one big mess, yes I did need that also.. It seems that when I
>>> make changes even to my reverse auto patch it affects the error that I
>>> noted. Thanks for the info for sure!
>>>
>>> Sent from the iRoad
>>>
>>> On Mar 30, 2016, at 18:26, Jim Duuuude <telesistant at hotmail.com> wrote:
>>>
>>> No, that's a SIP problem, I thought you were needing info on the reverse
>>> autopatch.
>>>
>>>
>>> ------------------------------
>>> *From:* JJC <cummingsj at gmail.com>
>>> *Sent:* Wednesday, March 30, 2016 5:24 PM
>>> *To:* Jim Duuuude
>>> *Cc:* app_rpt-users at ohnosec.org
>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>
>>> This will address the "found no matching peer or user" error?
>>>
>>> Sent from the iRoad
>>>
>>> On Mar 30, 2016, at 17:10, Jim Duuuude <telesistant at hotmail.com> wrote:
>>>
>>> A real, live example is in extensions.conf, just after the beginning of
>>> the [allstar-sys] stanza:
>>>
>>>
>>> exten =>
>>> _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75
>>>
>>> exten => _1.,n,Hangup
>>>
>>>
>>> In this case, it is passed 1 plus the node number as an extension. If
>>> you replace "${EXTEN:1}" with your node
>>>
>>> number it should work.
>>>
>>>
>>> Jim
>>>
>>>
>>> ------------------------------
>>> *From:* app_rpt-users-bounces at ohnosec.org <
>>> app_rpt-users-bounces at ohnosec.org> on behalf of JJC <cummingsj at gmail.com
>>> >
>>> *Sent:* Wednesday, March 30, 2016 3:21 PM
>>> *To:* app_rpt-users at ohnosec.org
>>> *Subject:* [App_rpt-users] Reverse AutoPatch
>>>
>>> I have scoured the internet to find documentation about reverse
>>> autopatch but have had no luck. I have been able to get autopatch working
>>> without a problem and have had _limited_ success in getting allstar(dial)
>>> to answer.
>>>
>>> I was able to get allstar to answer and allow me to run DTMF with the
>>> following, but really all that I want is reverse autopatch or both....
>>>
>>> If I make any real changes to the stanza in extensions.conf I get an
>>> error like:
>>> Using INVITE request as basis request - 1939985154 at 198.199.84.66
>>> Found no matching peer or user for '198.199.84.66:5060'
>>> [Mar 30 16:15:32] NOTICE[575]: chan_sip.c:14351 handle_request_invite:
>>> Failed to authenticate user "Caller ID Strings..."
>>>
>>> <sip.conf>
>>> [general]
>>> allowguest = no
>>> match_auth_username=yes
>>> register=REDACTED:XXXXXX at gvgw.simonics.com/2230
>>>
>>> context = default
>>> allowoverlap = no ; Disable overlap dialing support.
>>> (Default is yes)
>>> bindport = 5060 ; UDP Port to bind to (SIP standard port
>>> is 5060)
>>> bindaddr = 0.0.0.0 ; IP address to bind to (0.0.0.0 binds
>>> to all)
>>> srvlookup = yes ; Enable DNS SRV lookups on outbound
>>> calls
>>>
>>>
>>> [GV17193576518]
>>> type=friend
>>> autocreatepeer=yes
>>> insecure=port,invite
>>> username=REDACTED
>>> secret=XXXXXXX
>>> host=gvgw.simonics.com
>>> qualify=no
>>> ;permit=0.0.0.0/0.0.0.0
>>> context=custom-gv-answer
>>>
>>> <extensions.conf>
>>> [custom-gv-answer]
>>> exten => 2230,1,Answer()
>>> exten => 2230,n,Playback(rpt/node)
>>> exten => 2230,n,Saydigits(${EXTEN:1})
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160331/533ddabe/attachment.html>
More information about the App_rpt-users
mailing list