[App_rpt-users] Disable the TXENA

Skyler F electricity440 at gmail.com
Tue May 3 00:11:39 UTC 2016


>
> It will play it back locally but not out the remote base transmitter.
> Mine is the Doug hall rbi1


Well... Mine is set up as a remote base, and when I hook another node into
it, and run the playback command, the remote base transmits it.



On Mon, May 2, 2016 at 6:09 PM, Corey Dean <n3fe at repeater.net> wrote:

> It will play it back locally but not out the remote base transmitter.
> Mine is the Doug hall rbi1
>
> Sent from my iPhone
>
> On May 2, 2016, at 7:44 PM, Skyler F <electricity440 at gmail.com> wrote:
>
> I have my node configured as a remote base node and when it is connected
> to another node, and the other node does a PLAYBACK, the remote base hears
> it and retransmitts it. Is that normal??
>
>
>
> On Mon, May 2, 2016 at 4:24 PM, Corey Dean <n3fe at repeater.net> wrote:
>
>> If it was actually in remote base mode it wouldn't do this...
>>
>> Sent from my iPhone
>>
>> On May 2, 2016, at 5:06 PM, Skyler F <electricity440 at gmail.com> wrote:
>>
>> When I do a playback from another LOCAL node, (sharing the same
>> rpt.conf), the remote base will play the audio file over it's transmitter.
>> I was able to solve this problem by disabling the transmitter for the
>> duration of the script so that it does not play any of the telemetry when
>> switching channels.
>>
>> Modifying app_rpt.c  to replace "RPTENA" with "" and then recompiling
>> asterisk did solve the issue so it won't announce anything when I re
>> activate the transmitter.
>>
>> 73
>> Skyler KDØWHB
>>
>> On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer at gmail.com> wrote:
>>
>>> Are you sure you need to disable the TX? I'm pretty sure none of the
>>> telemetry comes out of the remote side.
>>>
>>> On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440 at gmail.com>
>>> wrote:
>>>
>>>> Is it possible to disable the T X E N A announcement when re enabling
>>>> the transmitter? I have a script which disables the transmitter and
>>>> re-enables every time that I switch channels on my remote base. It is sort
>>>> of annoying that it goes throughout all links that have telemetry enabled.
>>>>
>>>> 73
>>>> Skyler
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>>> down to the bottom of the page. Enter your email address and press the
>>>> "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>
>>>
>>>
>>> --
>>> --
>>> Tim
>>>
>>
>>
>>
>> --
>> Skyler Fennell
>> amsatnet.info
>> KDØWHB
>> electricity440 at gmail.com
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
>
>


-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160502/e9b91110/attachment.html>


More information about the App_rpt-users mailing list