[App_rpt-users] . usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee
KM4NRJ FLORIDA
km4nrj at gmail.com
Sat May 21 21:36:19 UTC 2016
Excuse my mistake.
Edit the urd_tune_usb.conf not urd.conf
On May 21, 2016 17:08, <app_rpt-users-request at ohnosec.org> wrote:
> If you are using Xipar then under the CLI use:
>
> radio probe on
>
> It will scan all currently connected Fobs and indicate bus and device
> number.
>
> radio probe off
>
> will stop the scan.
>
> Edit the urd.conf file to set device parameters accordingly.
>
> Restart Asterisk
> On May 21, 2016 17:08, <app_rpt-users-request at ohnosec.org> wrote:
>
> Send App_rpt-users mailing list submissions to
> app_rpt-users at ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request at ohnosec.org
>
> You can reach the person managing the list at
> app_rpt-users-owner at ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
> 1. usbradio_tune_xxxxx.conf where .conf = .confusion (Steve Agee)
> 2. Voter RTCM sometimes offline-mode but not when there is a
> telnet connection (info at rainerbertsch.de)
> 3. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (kk6ecm)
> 4. Re: usbradio_tune_xxxxx.conf where .conf = .confusion (Steve
> Agee)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 21 May 2016 14:04:56 -0500
> From: Steve Agee <n5zua at earthlink.net>
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf =
> .confusion
> Message-ID: <c5dc4bf0-2c2c-3566-f32e-31a311653463 at earthlink.net>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
> Hello list:
>
> I've searched
>
> <http://www.xelatec.com/xipar/node/180>
>
> and I fully understand the description/explanations given. What I don't
> understand, with specific attention to the lines:
>
> |; name=usb ;
> ; devnum=1 ;
> devstr=4-2 ;
>
> is how to manually uncomment, and manipulate them. In this particular
> instance, I'm trying to get a DIAL box running with one original URI
> (early version) using the USBRADIO channel driver, and one URIX (newer
> version) using the SIMPLEUSB channel driver. I've followed the
> step-by-step (or was that Crossbar 5 Duude?) instructions for starting
> off with a single node, then adding the second node. That simply doesn't
> work. The second URIx green L.E.D. stays solid throughout the process.
> Are these lines provided for informational purposes only, or can they be
> edited to force the second device to be recognized and assigned?
>
> N5ZUA
>
> |
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/7a2b5993/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Sat, 21 May 2016 22:02:45 +0200
> From: "info at rainerbertsch.de" <info at rainerbertsch.de>
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Voter RTCM sometimes offline-mode but not
> when there is a telnet connection
> Message-ID: <C881739D-1333-4A44-AF95-0167725A6BCE at rainerbertsch.de>
> Content-Type: text/plain; charset="utf-8"
>
> Hi there,
>
> Since November, we are trying to build a voting system.
> We need some help please !
>
> Hardware:
> Supermicro Intel Atom D525 (we also tried a RaspberryPi and an other
> computer)
> Software: Since yesterday DIAL from Alllstar-Homepage (Before we tried it
> with ACID)
> RTCM from Micro Node, Mark, we have 4 of them and tried all of them
> Garmin GPS 18x LVC, also wie tried 4 of them.
>
> Error:
> More or less often the RTCM switch in the offline mode. When there is
> traffic very often.
> But not if at the same time there is a telnet connection from any computer
> to the RTCM.
>
> We suspect a networking problem between our asterisk-server and RTCM
> Network-Card is set to 10 MB / s half-duplex like in the RTCM.
>
> From tcpdump from server to rtcm we got:
>
> ??? snip ----------
>
> GPSTime (cli0_yy): 05/05/16 12:48:01.000000000
> SysTime: 05/05/16 12:48:01.040000
> DrainTime: 05/05/16 12:48:01.000
> Got GPS (cli0_yy): Lat: 4857.60N, Lon: 00915.01E, Elev: 214.4
> sending KEEPALIVE (GPS) packet to client cli2_bprx digest bbb4c643
> GPSTime (cli2_bprx): 05/05/16 12:48:01.000000000
> SysTime: 05/05/16 12:48:01.300000
> DrainTime: 05/05/16 12:48:01.240
> Got GPS (cli2_bprx): Lat: 4853.16N, Lon: 00912.65E, Elev: 317.2
> sending KEEPALIVE (GPS) packet to client cli0_yy digest 79d9c77d
> GPSTime (cli0_yy): 05/05/16 12:48:02.000000000
> SysTime: 05/05/16 12:48:02.040000
> DrainTime: 05/05/16 12:48:02.000
> Got GPS (cli0_yy): Lat: 4857.60N, Lon: 00915.01E, Elev: 214.4
> sending KEEPALIVE (GPS) packet to client cli2_bprx digest bbb4c643
> [May 512:48:03]NOTICE[6559]:chan_voter.c:3632voter_reader:Voter
>
> lost master timing source!!
>
> sending packet challenge 200371797 digest 7749985d password BLAH sending
> packet challenge 200371797 digest 7749985d password BLAH sending packet
> challenge 200371797 digest bbb4c643 password BLAH GPSTime (cli2_bprx):
> 05/05/16 12:48:18.000000000
>
> SysTime: 05/05/16 12:48:18.320000
> DrainTime: 01/01/70 01:00:00.340
> Got GPS (cli2_bprx): Lat: 4853.16N, Lon: 00912.65E, Elev: 317.2
>
> -- Voter client cli0_yy disconnect (timeout)
>
> sending KEEPALIVE (GPS) packet to client cli2_bprx digest bbb4c643
>
> ??? snip ----------
>
> Konfiguration of the Ethernet-Card
>
> # ethtool eth0
> Settings for eth0:
> Supported ports: [TP]
> Supported link modes: 10baseT / Half 10baseT / Full
> 100baseT / Half 100baseT / Full
> 1000baseT / Full
> Supported break frame use: No
> Supports auto-negotiation: Yes
> Advertised link modes: Not reported
> Advertised break frame use: No
> Advertised auto-negotiation: No
> Speed: 10Mb / s
> Duplex: Half
> Port: Twisted Pair
> PHYAD: 1
> Transceiver: internal
> Auto-negotiation: off
> MDI-X: off (auto)
> Supports Wake-on: pumbg
> Wake-on: g
> Current message level: 0x00000007 (7)
> drv sample link
>
> Does anyone have an idea what it may be ?
> Why there is no problem with telnet at the same time and how can we run
> the system without this workaround
>
> --
> Rainer Bertsch
> DF3SY
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/9ca14c8a/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Sat, 21 May 2016 13:55:40 -0700
> From: "kk6ecm" <kk6ecm at gmail.com>
> To: <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf =
> .confusion
> Message-ID: <638EEEDD093A4435AC75ECFA4CFB35E8 at ThePykesHP>
> Content-Type: text/plain; charset="us-ascii"
>
> run lsusb at the command line, then set devstr=<bus>-<device> for the
> device(s) shown. Your example is for Bus 004 Device 002.
>
>
>
> Bob
>
> kk6ecm
>
> 73
>
>
>
> _____
>
> From: app_rpt-users-bounces at ohnosec.org
> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Steve Agee
> Sent: Saturday, May 21, 2016 12:05 PM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf = .confusion
>
>
>
> Hello list:
>
> I've searched
>
> <http://www.xelatec.com/xipar/node/180>
> <http://www.xelatec.com/xipar/node/180>
>
> and I fully understand the description/explanations given. What I don't
> understand, with specific attention to the lines:
>
> ; name=usb ;
> ; devnum=1 ;
> devstr=4-2 ;
>
> is how to manually uncomment, and manipulate them. In this particular
> instance, I'm trying to get a DIAL box running with one original URI (early
> version) using the USBRADIO channel driver, and one URIX (newer version)
> using the SIMPLEUSB channel driver. I've followed the step-by-step (or was
> that Crossbar 5 Duude?) instructions for starting off with a single node,
> then adding the second node. That simply doesn't work. The second URIx
> green
> L.E.D. stays solid throughout the process. Are these lines provided for
> informational purposes only, or can they be edited to force the second
> device to be recognized and assigned?
>
> N5ZUA
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/8eb8b1d0/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 4
> Date: Sat, 21 May 2016 16:05:25 -0500
> From: Steve Agee <n5zua at earthlink.net>
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf =
> .confusion
> Message-ID: <86a1038a-7c34-a1c4-edf1-89da5dead8a7 at earthlink.net>
> Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
> Yup, tried that early on with no luck. Then tried using the (W) command
> in both radio-tune-menu or simpleusb-tune-menu. The <bus>-<dev> listed
> in the tuning files does not match what the "lsusb" command reports.
> Well, the <bus> matches, but NOT the <dev>. On a working ACID install
> under same conditions, I have two (count them two) different tuning
> files where "devnum=3" go figure, and it works!
> N5ZUA
>
> On 5/21/2016 3:55 PM, kk6ecm wrote:
> >
> > run lsusb at the command line, then set devstr=<bus>-<device> for the
> > device(s) shown. Your example is for Bus 004 Device 002.
> >
> > Bob
> >
> > kk6ecm
> >
> > 73
> >
> > ------------------------------------------------------------------------
> >
> > *From:*app_rpt-users-bounces at ohnosec.org
> > [mailto:app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Steve Agee
> > *Sent:* Saturday, May 21, 2016 12:05 PM
> > *To:* app_rpt-users at ohnosec.org
> > *Subject:* [App_rpt-users] usbradio_tune_xxxxx.conf where .conf =
> > .confusion
> >
> > Hello list:
> >
> > I've searched
> >
> > <http://www.xelatec.com/xipar/node/180>
> > <http://www.xelatec.com/xipar/node/180>
> >
> > and I fully understand the description/explanations given. What I
> > don't understand, with specific attention to the lines:
> >
> > |; name=usb ;|
> > |; devnum=1 ;|
> > |devstr=4-2 ;|
> >
> > |is how to manually uncomment, and manipulate them. In this particular
> > instance, I'm trying to get a DIAL box running with one original URI
> > (early version) using the USBRADIO channel driver, and one URIX (newer
> > version) using the SIMPLEUSB channel driver. I've followed the
> > step-by-step (or was that Crossbar 5 Duude?) instructions for starting
> > off with a single node, then adding the second node. That simply
> > doesn't work. The second URIx green L.E.D. stays solid throughout the
> > process. Are these lines provided for informational purposes only, or
> > can they be edited to force the second device to be recognized and
> > assigned?|
> >
> > |N5ZUA|
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20160521/69ecfba1/attachment.html
> >
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 87, Issue 33
> *********************************************
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160521/0d6f74a9/attachment.html>
More information about the App_rpt-users
mailing list