[App_rpt-users] One node usbradio, a second node simpleusb

[Steve Agee]

That did the trick! Thanks, David! Once I read the logic behind your 
argument, it made perfect sense, and the process went just as you 
described.

N5ZUA

On 5/21/2016 6:46 PM, David McGough wrote:
> Steve,
>
> Both usbradio and simpleusb are simultaneously competing for the available
> URI's...So, you have to train both drivers as to which URI to use.
>
> The procedure is straight-forward. This is an example for a 2 node system:
>
> 1) Fully setup the usbradio.conf and simpleusb.conf config files, each
> with [usb] and [usb1] stanzas.
>
> 2) Modify the rpt.conf file to use usbradio for both nodes. Stanzas like:
>
> rpt.conf:
>
> [1998]
> rxchannel=Radio/usb
> (lots of other config)
>
> [1999]
> rxchannel=Radio/usb1
> (lots of other config)
>
> 3) Start Asterisk with "asterisk -vvvvgc" and save the
> usbradio_tune_xxxx.conf files:
>
> *CLI> radio active usb
> Active (command) USB Radio device set to [usb]
> *CLI> radio tune save
> Saved radio tuning settings to usbradio_tune_usb.conf
> *CLI> radio active usb1
> Active (command) USB Radio device set to [usb1]
> *CLI> radio tune save
> Saved radio tuning settings to usbradio_tune_usb1.conf
> *CLI> stop now
>
> 4) Modify the rpt.conf setup for simpleusb:
>
> rpt.conf (test nodes 1998, 1999):
>
> [1998]
> rxchannel=SimpleUSB/usb
> (lots of other config)
>
> [1999]
> rxchannel=SimpleUSB/usb1
> (lots of other config)
>
> 5) Start Asterisk with "asterisk -vvvvgc" and save the
> simpleusb_tune_xxxx.conf files:
>
> *CLI>
> *CLI> susb active usb
> *CLI> susb tune save
> Saved radio tuning settings to simpleusb_tune_usb.conf
> *CLI> susb active usb1
> *CLI> susb tune save
> Saved radio tuning settings to simpleusb_tune_usb1.conf
> *CLI> stop now
>
> 6) FINALLY--You're ready! ...Change the rpt.conf to a mix/match of
> usbradio and/or simpleusb:
>
> rpt.conf (test nodes 1998, 1999):
>
> [1998]
> rxchannel=SimpleUSB/usb
> ;rxchannel=Radio/usb
> (lots of other config)
>
> (lots of other config)
>
> [1999]
> ;rxchannel=SimpleUSB/usb1
> rxchannel=Radio/usb1
> (lots of other config)
>
>
> 7) Start Asterisk and do further setup.
>
>
> 73, David KB4FXC
>
>
>
> On Sat, 21 May 2016, Steve Agee wrote:
>
>> Yes, and already "been there, done that" but the light on the second
>> URIx stays solid.
>>
>> N5ZUA
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160521/dfaa8826/attachment.html>