[App_rpt-users] DIAL and radio-tune-menu

[Kevin Custer]

You need to be under the Asterisk CLI to do a radio tune.

 From the asterisk directory, type    asterisk -vvvr    (press enter)

You will then see the prompt be something like repeater*CLI>

Then do your radio tune commands.




On 10/23/2016 10:29 PM, Joe Bennett wrote:
> Just got dial up and running with a Pi3. Initial setup looks good and 
> it has registered with the Allstar network.  Now I'm trying to use the 
> radio-tune-menu command but all I get is this:
>
> root at repeater:/etc/asterisk# radio-tune-menu
> Error parsing device parameters
> root at repeater:/etc/asterisk#
>
> I've checked that the rpt.conf and the usbradio.conf files are aligned 
> in what the USB device (URI) is called (usb28073):
>
> rpt.conf:
>
> [28073]                                                         ; 
> Change this to your assigned node number
>
> rxchannel = radio/usb28073                      ; Rx audio/signalling 
> channel
>
> usbradio.conf:
>
> [general]
>
> [usb28073]
>
> eeprom = 0              ; EEPROM installed: 0,1
>                         ; 0 = no (default)
>                         ; 1 = yes
>
>
> What am I missing???
>
>
> -Joe
>
> KA3NAM
>
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
>