[App_rpt-users] New server not starting asterisk relabily

[Steve Zingman]

Chris,
Your message went into the wrong folder on my e-mail. Sorry for the delay.

Lets start by NOT auto starting asterisk

add to /etc/init.d/asterisk:
exit 0 after:

DAEMON=/usr/sbin/asterisk
TRUE=/bin/true

So, it should read:

DAEMON=/usr/sbin/asterisk
TRUE=/bin/true
exit 0

reboot and lets see the output of asterisk -vvvcd

73, Steve N4IRS


On 9/21/2016 9:59 PM, C B wrote:
> Hi
>
> Testing a newly built Dial allstarlink server / nodes.
>
> The server is a HP DC5800 1 gig ram and 4 URI’s.
>
> The URI’s where done one at a time, downloading from the allstar web
> configuration.
>
> Sometimes it starts and sometimes it does not, sometimes it stays
> running after I type asterisk at the # prompt.
>
> The log below is some of the output after typing asterisk at the #
> prompt then quickly asterisk –rvvvvvvvvvvvvvvvvvvvvvv
>
> A similar problem that was experienced was due to ACPI.
>
> ACPI was disabled in the BIOS
>
> GRUB_CMDLINE_LINUX_DEFAULT="quiet" was changed to
> GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi=off"
>
> However the server would not boot that way.
>
> Any help greatly appreciated.
>
> Chris
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>

-- 
"Just say no to world domination"