[App_rpt-users] Node Connect
Steve Zingman
szingman at msgstor.com
Tue Sep 27 16:41:26 UTC 2016
What you are interested in is a Control Operator command.
See <http://docs.allstarlink.org/drupal/node/18>
<https://github.com/N4IRS/AllStar/blob/master/configs/rpt.conf>
73, Steve N4IRS
On 9/27/2016 12:27 PM, Chris Viningre wrote:
> I think I found human error to be the cause. I was not reentering the
> node number to turn off the link.
>
> I do have another question. Is there a command or way to shut down the
> repeater romotly?
>
>
> On Sep 27, 2016 4:29 AM, "Steve Zingman" <szingman at msgstor.com
> <mailto:szingman at msgstor.com>> wrote:
>
> Chris,
> You need to have the receive levels set so that the DTMF decoder
> gets the proper audio level.
>
> On 09/26/2016 04:35 PM, Chris Viningre wrote:
>
> No luck there either.
>
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510 <tel:%28915%29%20504-1510>
> chrisviningre at gmail.com <mailto:chrisviningre at gmail.com>
> Amateur Radio Operator: WS5B
> https://www.qrz.com/db/ws5b
> http://www.reverbnation.com/chrisviningre
> <http://www.reverbnation.com/chrisviningre>
>
>
> On Mon, Sep 26, 2016 at 12:58 PM, Steve Zingman
> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>
> Turn it down to about 3 KHz and try again.
>
> On 9/26/2016 2:57 PM, Chris Viningre wrote:
>
> Thanks Steve, I use the meter in simpleusb and it was
> above 5kz. I
> turned it up to see if it made a difference. It didn't.
> I don't have a
> service monitor so i'll have to wait. I think the club
> has one I can
> use.
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510 <tel:%28915%29%20504-1510>
> chrisviningre at gmail.com <mailto:chrisviningre at gmail.com>
> Amateur Radio Operator: WS5B
> https://www.qrz.com/db/ws5b
> http://www.reverbnation.com/chrisviningre
> <http://www.reverbnation.com/chrisviningre>
>
>
> On Mon, Sep 26, 2016 at 12:23 PM, Steve Zingman
> <szingman at msgstor.com <mailto:szingman at msgstor.com>>
> wrote:
>
> Well,
> You may not be sending enough audio to the DTMF decoder.
> <http://docs.allstarlink.org/drupal/node/92
> <http://docs.allstarlink.org/drupal/node/92>>
>
>
> On 9/26/2016 2:19 PM, Chris Viningre wrote:
>
>
> I just connected to the link repeater system I'm
> planing to use. I'm
> unable to disconnect. A local ham reported good
> sound. The only sound
> settings I did was to turn up the transmit in
> simpleusb-tune-menu. I
> didn't set any receive audio.
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510 <tel:%28915%29%20504-1510>
> chrisviningre at gmail.com
> <mailto:chrisviningre at gmail.com>
> Amateur Radio Operator: WS5B
> https://www.qrz.com/db/ws5b
> http://www.reverbnation.com/chrisviningre
> <http://www.reverbnation.com/chrisviningre>
>
>
> On Mon, Sep 26, 2016 at 12:09 PM, Steve Zingman
> <szingman at msgstor.com <mailto:szingman at msgstor.com>>
> wrote:
>
>
> *12100 does not disconnect?
> Did you set receive audio levels?
>
> On 9/26/2016 2:07 PM, Chris Viningre wrote:
>
>
>
> This is strange. now its connecting but
> I cant disconnect without
> rebooting the server.
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510 <tel:%28915%29%20504-1510>
> chrisviningre at gmail.com
> <mailto:chrisviningre at gmail.com>
> Amateur Radio Operator: WS5B
> https://www.qrz.com/db/ws5b
> http://www.reverbnation.com/chrisviningre <http://www.reverbnation.com/chrisviningre>
>
>
> On Mon, Sep 26, 2016 at 11:47 AM, Steve
> Zingman <szingman at msgstor.com
> <mailto:szingman at msgstor.com>>
> wrote:
>
>
>
> *32100 does not connect to node 2100?
>
> On 9/26/2016 1:36 PM, Chris Viningre
> wrote:
>
>
>
>
> I am running a node on my
> repeater. Its a new setup using
> a URI and
> Dial software. I can call the
> phone number and get to my node. It
> will
> let me talk on the repeater but
> the only commands I can use is *99
> to
> transmit and *70 for status. I
> cant connect to another node or any
> other commands. Coming in on a
> HT I can only use *70 and no other
> commands will do anything.I am
> new at this so any and all help
> would
> be great.
>
> Chris Viningre
> 70 W. Roadrunner
> Salt Flat, Texas 79847
> C:(915) 504-1510
> <tel:%28915%29%20504-1510>
> chrisviningre at gmail.com
> <mailto:chrisviningre at gmail.com>
> Amateur Radio Operator: WS5B
> https://www.qrz.com/db/ws5b
> http://www.reverbnation.com/chrisviningre
> <http://www.reverbnation.com/chrisviningre>
> _______________________________________________
--
"Did you enable that in modules.conf?"
More information about the App_rpt-users
mailing list