[App_rpt-users] Output CTCSS Follow Input?

[Tom Hayward]

On Fri, Aug 4, 2017 at 9:03 AM, Tom Hayward <tom at tomh.us> wrote:
> Steve, I am emailing faster than I am grepping. :-)
>
> I found where it sends this command to the channel driver:
> https://github.com/AllStarLink/Asterisk/blob/master/asterisk/apps/app_rpt.c#L19961-L19979
>
> I will look in the channel drivers next to see if the command is ever
> acted on...

Okay, this should be the last one. I found where the command is
received in usbradio. I did not find any section in simpleusb that
acts on this command.

https://github.com/AllStarLink/Asterisk/blob/20800a2f8480cd31f236ed1dba904a128d49b595/asterisk/channels/chan_usbradio.c#L2420-L2428

You would enable this permanently by adding the following to rpt.conf:
itxctcss = 1

Tom KD7LXL