[App_rpt-users] ctcss Encode Issues

Wed Aug 9 15:47:19 UTC 2017

Michael:

Just to make sure its out there ... the DSP software doesn't decode some 
standard PL tones.  It will generate anything to the TX.  If you haven't 
run this down yet ... I remember seeing a list of PL tones but I can't 
find it now.  I use the method you are trying to use and it works 
without any problems.

...STeve - KF5VH

On 8/9/2017 10:40 AM, Michael "Lee" Lockwood wrote:
> Thanks for the reply Steve.  When I uncomment txctcssdefault, it 
> reverts to no ctcss on the transmit side when PTT is release.
>
> On Wed, Aug 9, 2017 at 10:30 AM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     Michael,
>     We are looking at the channel drives now. I can't say I have tried
>     your config. I will test when I get a chance. Your configuration
>     looks correct. I would be interested in hearing what happens when
>     you comment out the txctcssdefault.
>     Hopefully someone else will chime in.
>
>     73, Steve N4IRS
>
>
>     On 8/9/2017 11:12 AM, Michael "Lee" Lockwood wrote:
>>     A follow up to my previous email:
>>
>>     I have multiple ctcss tone frequencies in usbradio.conf.  app_rpt
>>     is decoding the incoming CTCSS (confirmed using debug), and it
>>     transmits CTCSS while someone is actively keying the repeater. 
>>     However, as soon as they release PTT, app_rpt stops transmitting
>>     the corresponding CTCSS tone that was being used, and reverts to
>>     the default tone instead.
>>
>>     So, if I key the repeater using 146.2, it broadcasts out using
>>     146.2 and other radios hear audio just fine. But, as soon as I
>>     release PTT on the mobile/portable radio, the squelch tail is
>>     broadcast using 151.4, not 146.2.  This results in the users
>>     programmed with 146.2 not hearing the courtesy tone or squelch tail.
>>
>>     Has anyone else run in to this issue?
>>
>>     Here's my usbradio.conf file again:
>>
>>     [usb]
>>
>>     hdwtype=0
>>     rxboost=1
>>     txboost=1
>>     rxctcssrelax=1
>>     txctcssdefault=151.4
>>     rxctcssfreqs=146.2,141.3,151.4
>>     txctcssfreqs=146.2,141.3,151.4
>>     ;rxctcssoverride=0
>>     carrierfrom=usb
>>     ctcssfrom=dsp
>>     rxdemod=flat
>>     txprelim=yes
>>     txlimonly=no
>>     txtoctype=phase
>>     txmixa=composite
>>     txmixb=0
>>     invertptt=0
>>     duplex=1
>>     rxondelay=0
>>     rxnoisefiltype=0
>>     eeprom=0
>>
>>
>>     On Mon, Aug 7, 2017 at 7:41 PM, Michael "Lee" Lockwood
>>     <michael at lockwood.us.com <mailto:michael at lockwood.us.com>> wrote:
>>
>>         Hello,
>>         I am unable to get any ctcss to be encoded during transmit,
>>         except for the tone frequency that's entered in to the
>>         txctcssdetault field.  If I change that tone, the new value
>>         gets transmitted.  However, all of the other tones in the
>>         txctcssfreqs are being ignored.  However, I do know that the
>>         rxctcssfreqs values are being decoded.  If I transmit in to
>>         the repeater using a tone not listed, or without a tone,
>>         app_rpt ignores it and does not repeat and key up the
>>         transmitter.  Any assistance is greatly appreciated.  Thanks
>>         in advance!
>>
>>         Here's what's in my usbradio.conf
>>
>>         [usb]
>>
>>         hdwtype=0
>>         rxboost=1
>>         txboost=1
>>         rxctcssrelax=1
>>         txctcssdefault=151.4
>>         rxctcssfreqs=146.2,141.3,151.4
>>         txctcssfreqs=146.2,141.3,151.4
>>         ;rxctcssoverride=0
>>         carrierfrom=usb
>>         ctcssfrom=dsp
>>         rxdemod=flat
>>         txprelim=yes
>>         txlimonly=no
>>         txtoctype=phase
>>         txmixa=composite
>>         txmixb=0
>>         invertptt=0
>>         duplex=1
>>         rxondelay=0
>>         rxnoisefiltype=0
>>         eeprom=0
>>
>>
>>         -- 
>>
>>         *Michael "Lee" Lockwood*
>>         michael at lockwood.us.com <mailto:michael at lockwood.us.com>
>>
>>
>>
>>
>>     -- 
>>
>>     *Michael "Lee" Lockwood*
>>     michael at lockwood.us.com <mailto:michael at lockwood.us.com>
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at lists.allstarlink.org
>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>
>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
>
>
> -- 
>
> *Michael "Lee" Lockwood*
> michael at lockwood.us.com <mailto:michael at lockwood.us.com>
>
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> 
> 	Virus-free. www.avg.com 
> <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> 
>
>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170809/de52c2eb/attachment.html>