[App_rpt-users] ctcss Encode Issues

[Michael "Lee" Lockwood]

Fantastic... Now I'll just patiently wait.  Who am I kidding? Knowing that
there's new things in the works is exciting!

On Fri, Aug 11, 2017 at 10:51 AM, Steve Zingman <szingman at msgstor.com>
wrote:

> It will be looked at. Work is happening on channel drivers now. (among a
> LOT of other things)
>
> Steve N4IRS
>
>
> On 8/11/2017 11:39 AM, Michael "Lee" Lockwood wrote:
>
> Understood, thanks Tom!  I hope this does get implemented, or finalized at
> some point.
>
> On Fri, Aug 11, 2017 at 10:36 AM, Tom Hayward <tom at tomh.us> wrote:
>
>> On Fri, Aug 11, 2017 at 8:28 AM, Michael "Lee" Lockwood
>> <michael at lockwood.us.com> wrote:
>> >
>> > Just to circle back on this topic...
>> >
>> > I tried itxctcss = as both 1 and 0 and no difference on this.
>> >
>> > If I'm understanding correctly, at this point app_rpt does only
>> transmit the "default" ctcss for the repeater tail and courtesy tone, by
>> design.  It does not transmit the other txctcss tones in the usbradio.conf
>> file.  I haven't misconfigured anything?
>>
>> If I were designing it, I would have done it this way, so I think that
>> yes it is acting as designed.
>>
>> However, since the itxctcss command exists, it should follow the
>> itxctcss command. It sounds like that piece was never implemented.
>> This is sort of halfway between a feature request and a bug report,
>> but I think it should be programmed so that when itxctcss == 1 it
>> operates as it does now, and when itxctcss == 0 it should operate as
>> you request, transmitting the input tone through the end of the
>> transmission.
>>
>> Tom KD7LXL
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
>
> *Michael "Lee" Lockwood*
> michael at lockwood.us.com
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 

*Michael "Lee" Lockwood*
michael at lockwood.us.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170811/5f6ef31e/attachment.html>