[App_rpt-users] RTCM Inbound (Eth Rx) packet out of bounds

[Tim Sawyer]

I haven't made it down to the site yet. Want to be on site in case It
doesn't work and I have to use the serial port.

On Sat, Dec 2, 2017 at 6:19 PM, Hayden Honeywood <haydenph91 at gmail.com>
wrote:

> Hi Tim,
>
> I haven't noticed any transmitter drops, but I'm sure if would happen.
>
> My switch port is currently set as 10/half. I set it to be the same as the RTCM, which was set in the firmware. Did you find going to full duplex helped?
>
> Hayden
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
--
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171202/95674436/attachment.html>