[App_rpt-users] XPR8300 Repeater

[Steve Zingman]

Eric,
A quick answer is, yes it can be done. The question is what you are 
trying to do. A XPR8300 can be connected to a URI just like any other 
Analog repeater. All the signals you need are on the 26 pin connector. 
In that configuration, with the repeater configured in Dynamic Mixed 
Mode (an option available for purchase from Motorola) DMR traffic would 
be repeated locally and analog traffic would go to AllStarLink. The 
problem with Dynamic Mixed Mode is that IP site connect is not available 
for DMR. This means no DMR networking, local DMR repeat only.

If you want to connect the XPR8300 in DMR mode to one of the DMR 
networks, DMR-MARC, DCI, or BrandMeister AND AllStarLink, there is 
another way. You can run a "bridge" between the XPR8300 in DMR mode and 
AllStarLink. There is a discussion group dedicated to that type of 
bridging at <https://groups.io/g/DVSwitch>

73, Steve N4IRS

On 12/10/2017 04:48 AM, Eric EG. Guth wrote:
>
> Has anyone successfully connected and used a Motorola XPR8300 repeater 
> with both Allstar and DMR?  We would like to install one that will do 
> both.
>
> 73,
>
> Eric Guth
>
> 4Z1UG
>
> Allstar: 28422
>
> QSO Today <http://www.qsotoday.com/>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171210/614f9180/attachment.html>