[App_rpt-users] Changing from radioless dahdi to simpleusb

[Steve Zingman]

What error do you get?

On 12/12/2017 3:33 PM, Will Bashlor wrote:
>
> Here are the first 3 lines of my rpt.conf
>
> ;rxchannel=Radio/usb46841
>
> ;rxchannel = dahdi/pseudo
>
> rxchannel=SimpleUSB/usb
>
> And here are the channel modules from modules.conf
>
> ; Channels
>
> noload => chan_agent.so ;                       Agent Proxy Channel
>
> noload => chan_alsa.so ;                        ALSA Console Channel 
> Driver
>
> noload => chan_beagle.so ;                      Beagleboard Radio 
> Interface Channel Driver
>
> load => chan_dahdi.so ;                         DAHDI Telephony
>
> noload => chan_echolink.so ;                    echolink Channel Driver
>
> noload => chan_features.so ;                    Feature Proxy Channel
>
> noload => chan_gtalk.so ;                       Gtalk Channel Driver
>
> load => chan_iax2.so ;                          Inter Asterisk 
> eXchange (Ver 2)
>
> load => chan_local.so ;                         Local Proxy Channel 
> (Note: used internal
>
> noload => chan_oss.so ;                         Channel driver for OSS 
> sound cards
>
> noload => chan_phone.so ;                       Generic Linux 
> Telephony Interface driver
>
> noload => chan_pi.so ;                          DMK Engineering "PITA" 
> Board on Rpi2/3 Channel Driver
>
> load => chan_simpleusb.so ;                     CM1xx USB Cards with 
> Radio Interface Channel Driver (No DSP)
>
> noload => chan_sip.so ;                         Session Initiation 
> Protocol (SIP)
>
> noload => chan_tlb.so ;                         TheLinkBox Channel Driver
>
> noload => chan_usbradio.so ;                    CM1xx USB Cards with 
> Radio Interface Channel Driver (DSP)
>
> noload => chan_usrp.so ;                        GNU Radio interface 
> USRP Channel Driver
>
> noload => chan_voter.so ;                       Radio Voter Channel Driver
>
> *From:*Will Bashlor [mailto:will at bashlor.com]
> *Sent:* Tuesday, December 12, 2017 3:11 PM
> *To:* 'Users of Asterisk app_rpt' <app_rpt-users at lists.allstarlink.org>
> *Subject:* Changing from radioless dahdi to simpleusb
>
> Hi all,
>
> I have an AllStar node on Raspbian Stretch installed via apt-get 
> install. It’s been working fine with dahdi as a radioless node but now 
> I want to test with simpleusb using a CM108 and BF888. I have 
> everything connected and there’s a solid red light on the CM108 and it 
> doesn’t seem to be communicating with allstar. I can see it with lsusb 
> –t fine, see below.
>
> Also do I need to disable dahdi in modules? If I do that then I get 
> error “No channel type registered for 'DAHDI'” and asterisk quits.
>
> Any quick pointers or advice? Thanks.
>
> pi at raspberrypi:~ $ sudo lsusb -t
>
> /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
>
>     |__ Port 1: Dev 2, If 0, Class=Audio, Driver=snd-usb-audio, 12M
>
>     |__ Port 1: Dev 2, If 1, Class=Audio, Driver=snd-usb-audio, 12M
>
>     |__ Port 1: Dev 2, If 2, Class=Audio, Driver=snd-usb-audio, 12M
>
>     |__ Port 1: Dev 2, If 3, Class=Human Interface Device, 
> Driver=usbhid, 12M
>
> pi at raspberrypi:~ $
>
> -Will
>
> KE4IAJ
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171212/b6508d25/attachment.html>