[App_rpt-users] Regarding Dial installation..

[Brian Gieryk]

I had an issue with apt-get, regarding not being able to write to allstarlink.org <http://allstarlink.org/> (or something similar, not at the computer I tried on).

Brian
KE6IYC

> On Dec 17, 2017, at 4:09 PM, Steve Zingman <szingman at msgstor.com> wrote:
> 
> Future version of the install will use apt-get (which someone could not make work either)
> This should reduce the time required to install ASL. This will also provide a simple upgrade path as needed.
> 
> On 12/17/2017 05:47 PM, Peter Kendall wrote:
>> Been watching this thread for a bit. Funnily enough I have/have had
>> exactly the same problem installing the SAME iso that has previously
>> been working fine. Stuck at " Reading state information" just assumed it
>> was something my end. Installed debian 9 and used the new apt repository
>> to install allstar and all good.
>> 
>> 73
>> Peter
>> G7RPG
>> 
>> 
>> On 17/12/17 22:25, Loren Tedford wrote:
>>> After spending two weeks in total off and on working on the
>>> installation of dial via the iso files provided by the
>>> allstarlink.org  website wiki. I have finally  gotten a clean
>>> installation in a VM.. I am posting this VM public for everyone to be
>>> able to download in the event you can't get allstarlink installed..
>>> The password is the default usernaame: repeater password: allstarlink
>>> Just as listed in the wiki.. I also posted the iso files as well.. I
>>> still think this was a scripting issue some where and I think that we
>>> need to be much more careful in how we handle allstarlink stable
>>> distro in the future.. We need to make sure that Stable is Stable and
>>> create test versions rather than make random changes.. I am thankful
>>> and grateful for everyones help during this entire problem however if
>>> i was some one that wasn't familiar with linux i would have given up
>>> by now for sure..  Their is no excuse for failed installations with a
>>> stable iso. Below will be the links to where i have stored these for
>>> everyone's download just as a just in case basis..
>>> 
>>> Here is what i think happened.. I think that either a script was mis
>>> typed for some reason or file extensions didn't match during
>>> installation on the second boot duration as seen in my video here..
>>> https://youtu.be/WKkEg-EEyNc It seemed to get stuck during the second
>>> boot where typically it would install allstarlink and do its thing.. I
>>> am not a huge fan of over the internet installations for the project
>>> however i understand why we have been doing it.. From time to time I
>>> think we should get together and store full iso images for
>>> installation on sites with no network or limited internet access..
>>> 
>>> 
>>> Here is a link to the iso i got to work..
>>> http://voipham.com/downloads/allstar-firmware-8.7.1-amd64-i386-netinst/
>>> 
>>> Here is a VM ready to import
>>> http://voipham.com/downloads/Debian%208.7.1-amd64-i386-VirtualBox.zip
>>> 
>>> 
>>> Lets hope this doesn't happen in the future..
>>> 
>>> Loren Tedford (KC9ZHV)
>>> 
>>> 
>>> Please lets be more careful from here on out..
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> and scroll down to the bottom of the page. Enter your email address
>>> and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message
>>> to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171217/a52706cb/attachment.html>