[App_rpt-users] New DIAL Install No RX or TX Audio from URI

[Steve Zingman]

Which channel driver are you using?
Anything in the log?

73, Steve N4IRS

On 12/26/2017 11:30 AM, Keith Dobbins wrote:
> I had my node working under ACID till a hard drive decided to crash on 
> me. I did the re-install with the 32 bit DIAL install. Everything 
> about the node appears to function properly but from asterisk to my 
> URI I get ZERO audio in or out. It's the only audio adapter, and the 
> URIDIAG with the loopback plug tests fine. It will activate the TX and 
> I get the blinking green led but no audio in or out. Is there 
> somewhere I can look to troubleshoot this issue? The motherboard is an 
> older atom 330 board. Should I fall back to the older ACID install for 
> this node which had worked.
>
> Thanks for any guidance that you can provide.
> Keith Dobbins N8KLD
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171226/a57f36c6/attachment.html>