[App_rpt-users] Pass a flag to script file from rpt.conf?

[Steve Mahler]

Duane:

You can also do ...

C16=cmd,/etc/asterisk/SCRIPTS/WXA/wwbuild 28
C17=cmd,/etc/asterisk/SCRIPTS/WXA/wwbuild 30

and yes, WXZIP refers to Mark Johnston and his script work.

...STeve - KF5VH


On 2/5/2017 10:39 AM, Steve Mahler wrote:
>
> You could check out the method used by WXZIP.
>
> ...STeve - KF5VH
>
>
> On 2/5/2017 10:36 AM, DuaneVT . wrote:
>> I need to control switches within a script file via user dtmf 
>> command. How would I pass a number or flag from the app_rpt to my 
>> script file?
>> I have been trying this from terminal, but do not understand how to 
>> turn control over to the remote user.
>> Thanks and 73,
>> Duane KA1LM
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170205/bfa261ef/attachment.html>