[App_rpt-users] DMKx Uri Problem

[Bruce B Isaacson]

Hello,

 

Still having trouble with my DMk URIx dongle. I have installed "uridiag" a
standalone program to test a known good unit having returned it to DMK.
They were very gracious and tested it for me and found no problems with it.
The loop around has been tested for continuity a number of times and tested
good each and every time.  I appears that I have a driver problem based on
the "Unable to" error that is displayed upon opening the program although it
finds the URIx.  Some of the test appear to work however the "T" test does
not nor does it see audio in from the radio however; audio out to the radio
is ok.  

 Any help would be appreciated.

 

root at JamestownNY:/usr/bin# lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 002 Device 003: ID 0d8c:013a C-Media Electronics, Inc.

Bus 002 Device 002: ID 045e:00dd Microsoft Corp. Comfort Curve Keyboard 2000
V1.0

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

 

Found CM119 USB Radio Interface at 002/003

Unable to re-open DSP device 1: /dev/dsp1

Menu:

 

For Left Channel:

1 - 1004Hz, 2 - 204Hz, 3 - 300Hz, 4 - 404Hz, 5 - 502Hz

6 - 1502Hz, 7 - 2004Hz, 8 - 3004Hz, 9 - 5004Hz

For Right Channel:

11 - 1004Hz, 22 - 204Hz, 33 - 300Hz, 44 - 404Hz, 55 - 502Hz

66 - 1502Hz, 77 - 2004Hz, 88 - 3004Hz, 99 - 5004Hz

Tests, etc.

t - test normal operation (use uppercase 'T' for verbose output)

i - test digital signals only (COR,TONE,PTT,GPIO)

e - test EEPROM, E - Initialize EEPROM

l - list EEPROM contents

c - show test (loopback) connector pinout

q,x - exit program

 

Enter your selection:T

Testing digital I/O (PTT,COR,TONE and GPIO)....

Digital I/O passed!!

Testing Analog at 204 (and 700) Hz...

Analog level on left channel for 204.0 Hz (0.0) is out of range!!

Must be between 440.0 and 660.0

Analog level on right channel for 700.0 Hz (0.0) is out of range!!

Must be between 440.0 and 660.0

Testing Analog at 504 (and 700) Hz...

Analog level on left channel for 504.0 Hz (0.0) is out of range!!

Must be between 440.0 and 660.0

Analog level on right channel for 700.0 Hz (0.0) is out of range!!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170210/c411c33e/attachment.html>