[App_rpt-users] DMKx Uri Problem

Sun Feb 12 19:15:23 UTC 2017

Steve;
Ok, I will give it a try. Thanks; I will let you know how it goes.

Bruce

-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Steve Zingman
Sent: Sunday, February 12, 2017 1:39 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] DMKx Uri Problem

Bruce,

A reload will NOT fix your issue.

We have found a bug in uridiag.

1: Make sure asterisk is NOT running when you want to use uridiag. It will fail.

2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program.

3: The bug only affects uridiag, not asterisk

4: I will be publishing a fix for uridiag later today or tomorrow.

5: if you want to test uridiag before the fix.

     stop asterisk

     run alsamixer

     press F6 to select the C-Media sound device

     use the up arrow to set the Headphone level to 100<>100 (100%)

     press esc to exit alsamixer

     run uridiag and test again.

If you re-run asterisk then uridiag, uridiag will fail. You will have to reset the level to 100%

The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly.

The fix will solve this going forward.

73, Steve N4IRS

On 02/11/2017 09:00 AM, Bruce B Isaacson wrote:
> Appreciate all the help! Please keep it coming! Need to fix this or reload.
>
> -----Original Message-----
> From: App_rpt-users 
> [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of 
> Steve Zingman
> Sent: Saturday, February 11, 2017 5:56 AM
> To: Bob; Users
> Subject: Re: [App_rpt-users] DMKx Uri Problem
>
> I disagree.  URI Diag works in DIAL. URIDiag has  problem on the Pi.
> Works fine on a X86.
> Sent via smoke signal (AT&T)
> On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1 at gmail.com> wrote:
>
> I chased this for awhile until I realized uridiag does not work with 
> DIAL. Chasing that down was not up very high on anyone's list. I've 
> chased URI and URIx issues, and the likelihood of it being the problem 
> is slim to none. On the other hand, Bryan's suggestions are worth the 
> time chasing :-)
>
> Thanks,
> Bob
> k6ecm
> 73
>
> Sent from iPad
>
>
>> On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike at jmbruce.biz> wrote:
>>
>> Hi Bryan,
>> There is a deeper problem than Asterisk.  The program I am using is a stand-alone program designed to test DMK URIx dongle.  Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver.  I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
>>
>> Thanks for your input.
>>
>> -----Original Message-----
>> From: App_rpt-users
>> [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of 
>> Bryan D. Boyle
>> Sent: Friday, February 10, 2017 4:37 PM
>> To: app_rpt-users at lists.allstarlink.org
>> Subject: Re: [App_rpt-users] DMKx Uri Problem
>>
>>> On 2/10/2017 2:54 PM, Bruce B Isaacson wrote:
>>> Hello,
>> What version of the asterisk/allstar are you using?
>>
>> What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
>>
>> Is rpt.conf pointing to the right usb device (should be the 
>> rxchannel= line, where usbxxxx in this line should be the same as the 
>> usbxxxx in the tune file name
>>
>> --
>> Bryan D. Boyle
>> Morrisville PA
>> http://www.wb0yle.com
>> http://www.lotuseuropa.us
>>
>> #include funny.quote.here
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 