[App_rpt-users] DMKx Uri Problem

Sun Feb 12 22:04:47 UTC 2017

I would check your COS and CTCSS settings in the channel simpleusb.conf


On 02/12/2017 04:59 PM, Bruce B Isaacson wrote:
> Steve,
> Uridiag worked perfectly and it passes all tests and now comes the however; when I do a simpleusb-tune-menu Set RX Voice Level (Using Display) I get nothing.  I tested the output from the radio and it is making it just fine to the URIx but not beyond that. It appears to me that all the other test work just fine including the Set Transmit A and B level.  Hear the tones just fine. Currently the RX Channel is set at 650.
>
> So it appears that all is fine going out to the radio but not into the node.  When I access the node using the computer I hear it just fine but not my HT when I transmit back.  Sort of repeating myself here.  Actually back to square 1.
>
> Any ideas I can try would be greatly appreciated.
>
> Thanks for the help.
>
> -----Original Message-----
> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Steve Zingman
> Sent: Sunday, February 12, 2017 1:39 PM
> To: Users of Asterisk app_rpt
> Subject: Re: [App_rpt-users] DMKx Uri Problem
>
> Bruce,
>
> A reload will NOT fix your issue.
>
> We have found a bug in uridiag.
>
> 1: Make sure asterisk is NOT running when you want to use uridiag. It will fail.
>
> 2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program.
>
> 3: The bug only affects uridiag, not asterisk
>
> 4: I will be publishing a fix for uridiag later today or tomorrow.
>
> 5: if you want to test uridiag before the fix.
>
>       stop asterisk
>
>       run alsamixer
>
>       press F6 to select the C-Media sound device
>
>       use the up arrow to set the Headphone level to 100<>100 (100%)
>
>       press esc to exit alsamixer
>
>       run uridiag and test again.
>
> If you re-run asterisk then uridiag, uridiag will fail. You will have to reset the level to 100%
>
> The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly.
>
> The fix will solve this going forward.
>
>
> 73, Steve N4IRS
>
>
> On 02/11/2017 09:00 AM, Bruce B Isaacson wrote:
>> Appreciate all the help! Please keep it coming! Need to fix this or reload.
>>
>> -----Original Message-----
>> From: App_rpt-users
>> [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of
>> Steve Zingman
>> Sent: Saturday, February 11, 2017 5:56 AM
>> To: Bob; Users
>> Subject: Re: [App_rpt-users] DMKx Uri Problem
>>
>> I disagree.  URI Diag works in DIAL. URIDiag has  problem on the Pi.
>> Works fine on a X86.
>> Sent via smoke signal (AT&T)
>> On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1 at gmail.com> wrote:
>>
>> I chased this for awhile until I realized uridiag does not work with
>> DIAL. Chasing that down was not up very high on anyone's list. I've
>> chased URI and URIx issues, and the likelihood of it being the problem
>> is slim to none. On the other hand, Bryan's suggestions are worth the
>> time chasing :-)
>>
>> Thanks,
>> Bob
>> k6ecm
>> 73
>>
>> Sent from iPad
>>
>>
>>> On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike at jmbruce.biz> wrote:
>>>
>>> Hi Bryan,
>>> There is a deeper problem than Asterisk.  The program I am using is a stand-alone program designed to test DMK URIx dongle.  Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver.  I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer.
>>>
>>> Thanks for your input.
>>>
>>> -----Original Message-----
>>> From: App_rpt-users
>>> [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of
>>> Bryan D. Boyle
>>> Sent: Friday, February 10, 2017 4:37 PM
>>> To: app_rpt-users at lists.allstarlink.org
>>> Subject: Re: [App_rpt-users] DMKx Uri Problem
>>>
>>>> On 2/10/2017 2:54 PM, Bruce B Isaacson wrote:
>>>> Hello,
>>> What version of the asterisk/allstar are you using?
>>>
>>> What does the device= line look like in your usbradio_tune_usbxxxx.conf look like?
>>>
>>> Is rpt.conf pointing to the right usb device (should be the
>>> rxchannel= line, where usbxxxx in this line should be the same as the
>>> usbxxxx in the tune file name
>>>
>>> --
>>> Bryan D. Boyle
>>> Morrisville PA
>>> http://www.wb0yle.com
>>> http://www.lotuseuropa.us
>>>
>>> #include funny.quote.here
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.