[App_rpt-users] uridiag fixed for DIAL

[Steve Zingman]

You sure it's DIAL? What is in the utils directory?


On 02/12/2017 05:06 PM, Steven Donegan wrote:
> Well, it was taken directly from a very early SD image you released and:
>
> [root at repeater src]# ls /usr/src
> examples  utils
> [root at repeater src]#
>
> Nothing at all there. So following the instructions of your earlier 
> post appears to not be possible. What am I missing?
>
> Thanks.
> Steven Donegan
> KK6IVC General Class FCC License
> FAA PP-ASEL Pilots License
> Silver State Car #86
> www.sscc.us
>
>
> On Sunday, February 12, 2017 2:03 PM, Steve Zingman 
> <szingman at msgstor.com> wrote:
>
>
> Steve,
> You should have the source. All DIAL installs contained the source. 
> Older versions of DIAL did not include uridiag.
> 73, Steve N4IRS
>
> On 02/12/2017 04:53 PM, Steven Donegan wrote:
>> I do not appear to have any of the DIAL source on my DIAL repeater - 
>> so how would I fetch the entire tree? I tried cloning AllStarLink 
>> without success. Thanks!
>> Steven Donegan
>> KK6IVC General Class FCC License
>> FAA PP-ASEL Pilots License
>> Silver State Car #86
>> www.sscc.us <http://www.sscc.us/>
>>
>>
>> On Sunday, February 12, 2017 1:43 PM, Steve Zingman 
>> <szingman at msgstor.com> <mailto:szingman at msgstor.com> wrote:
>>
>>
>> Well,
>>
>> I'm back after 3 days at the Orlando Hamfest. I had a great time meeting
>> with quite a few ASL users that found me out in the flea market. ( have
>> no idea how) I also had a chance to meet with a couple of hardware
>> vendors about going forward with ASL. More on this later. Thanks to all.
>>
>> We have found the bug in uridiag that fails a known good URI with the
>> loopback connector. In short, uridiag was not properly setting the audio
>> output level. This does not in anyway affect the operation of either USB
>> channel driver during normal asterisk operation.
>>
>> As with all ASL software, the source is published on GitHub at
>> <https://github.com/AllStarLink> in the uridiag repository.
>>
>> For those that want to fix uridiag on their existing installations:
>>
>> login as root
>>
>> cd /usr/src/astsrc-1.4.23-pre/
>>
>> rm -rf uridiag
>>
>> git clone https://github.com/AllStarLink/uridiag.git
>>
>> cd uridiag
>>
>> make
>>
>> cp uridiag /usr/local/bin
>>
>> You can now run the new uridiag. Make sure asterisk is NOT running.
>>
>> connect the loopback connector
>>
>> run uridiag
>>
>> 73, Steve N4IRS
>>
>>
>>
>>
>>
>>
>>
>> -- 
>> ---
>> "Real programmers use vi, that's why I use nano."
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org 
>> <mailto:App_rpt-users at lists.allstarlink.org>
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>> and scroll down to the bottom of the page. Enter your email address 
>> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org 
>> <mailto:App_rpt-users at lists.allstarlink.org>
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org 
> <mailto:App_rpt-users at lists.allstarlink.org>
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170212/073f2c7f/attachment.html>