[App_rpt-users] Run 2 nodes from 1 IP address.

Sun Feb 26 22:06:33 UTC 2017

You will also need to update this node udp port binding in the portal for that node.

--
Bryan Fields
M: +1-727-409-1194

> On Feb 26, 2017, at 15:06, Stephen Curtis <steve at m0hoy.com> wrote:
> 
> Hi Ray,
> 
> From your email I am assuming you have set different UDP bind ports within your iax,conf files for each node. If so you will just need to open the two UDP ports on your router and point them at the appropriate IP address for each node. This will then enable you to receive incoming connections to each device.
> 
> Best Regards
> 
> Steve M0HOY
> 
> 
>> On 26 Feb 2017, at 19:30, W2rjr <w2rjr at aim.com> wrote:
>> 
>> To all users,
>>  
>> I am new to all this so nay help would greatly be appreciated. I run one node full time on my repeater and I decided build a node with a link radio so I can connect to different nodes via an HT.  I run the second node on a different server and different port but, I believe I cant receive in bound connections, out bound seems to work. Any input would be a big help! I can be emailed directly if its easier. Thank you.
>>  
>> 73 
>> Ray, 
>> W2RJR
>>  
>>  
>> -----Original Message-----
>> From: app_rpt-users-request <app_rpt-users-request at lists.allstarlink.org>
>> To: app_rpt-users <app_rpt-users at lists.allstarlink.org>
>> Sent: Sat, Feb 25, 2017 3:08 pm
>> Subject: App_rpt-users Digest, Vol 96, Issue 55
>> 
>> Send App_rpt-users mailing list submissions to
>> app_rpt-users at lists.allstarlink.org
>> 
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> or, via email, send a message with subject or body 'help' to
>> app_rpt-users-request at lists.allstarlink.org
>> 
>> You can reach the person managing the list at
>> app_rpt-users-owner at lists.allstarlink.org
>> 
>> When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
>> 
>> This site is dedicated to the memory of Jim Dixon WB6NIL
>> Today's Topics: 1. Re: parallel port use (Marshall Oldham) 2. Re: parallel port use (Steve Zingman) ---------------------------------------------------------------------- Message: 1 Date: Sat, 25 Feb 2017 11:29:31 -0800 From: "Marshall Oldham" <ke6pcv at cal-net.org> To: "'Users of Asterisk app_rpt'" <app_rpt-users at lists.allstarlink.org> Subject: Re: [App_rpt-users] parallel port use Message-ID: <000301d28f9d$7d33a620$779af260$@org> Content-Type: text/plain; charset="utf-8" I posted this message in the beginning of the month and there seemed to be no interest. This probably is not a high priority on the list right now. 73 Marshall - ke6pcv From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Marshall Oldham Sent: Monday, February 06, 2017 2:37 PM To: app_rpt-users at lists.allstarlink.org Subject: [App_rpt-users] Pi 3 Use of GPIO for PTT and COS Greetings, Just wondering if anyone has been able to modify SimpleUSB or USBradio channel drivers to be able to use GPIO pins on the PI 3 for PTT and COS. This would be very useful for using potted sound fobs where you can not access the COS and PTT pins. I have noticed that the VK Link guys have channel drivers that support this feature. http://nevarc.net.au/manual/index.php?page=Wiring+to+a+radio Check out their Chan_SimpleUSB, Chan_USBradio configurations. Go to there main page http://vklink.com.au/manual/index.php?page=Main+page Then scroll down to "Choosing a Channel Driver" and click on that link. Looks like the work has been done, wondering if this could be added to official DIAL release features. Sure would be nice for folks that want to experiment without having to spend very much to play in the Allstarlink technology. Marshall – ke6pcv From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Steven Donegan Sent: Thursday, February 23, 2017 10:26 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] parallel port use For the Pi I would suggest just using the I/O pins on the board rather than a USB thingie :-) Steven Donegan KK6IVC General Class FCC License FAA PP-ASEL Pilots License Silver State Car #86 www.sscc.us -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170225/a9e43555/attachment-0001.html> ------------------------------ Message: 2 Date: Sat, 25 Feb 2017 15:08:35 -0500 From: Steve Zingman <szingman at msgstor.com> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org> Subject: Re: [App_rpt-users] parallel port use Message-ID: <e4e55865-d95a-1538-ead1-32ffdebb85fa at msgstor.com> Content-Type: text/plain; charset="utf-8"; Format="flowed" It will be added to the issues list. Thanks, Steve On 02/25/2017 02:29 PM, Marshall Oldham wrote: > > I posted this message in the beginning of the month and there seemed > to be no interest. > > This probably is not a high priority on the list right now. > > 73 > > Marshall - ke6pcv > > *From:*App_rpt-users > [mailto:app_rpt-users-bounces at lists.allstarlink.org] *On Behalf Of > *Marshall Oldham > *Sent:* Monday, February 06, 2017 2:37 PM > *To:* app_rpt-users at lists.allstarlink.org > *Subject:* [App_rpt-users] Pi 3 Use of GPIO for PTT and COS > > Greetings, > > Just wondering if anyone has been able to modify SimpleUSB or > USBradio channel drivers to be able to use GPIO pins on the PI 3 for > PTT and COS. > > This would be very useful for using potted sound fobs where you can > not access the COS and PTT pins. > > I have noticed that the VK Link guys have channel drivers that support > this feature. > > http://nevarc.net.au/manual/index.php?page=Wiring+to+a+radio > > Check out their Chan_SimpleUSB, Chan_USBradio configurations. > > Go to there main page > > http://vklink.com.au/manual/index.php?page=Main+page > > Then scroll down to "Choosing a Channel Driver" and click on that link. > > Looks like the work has been done, wondering if this could be added to > official DIAL release features. > > Sure would be nice for folks that want to experiment without having to  > spend very much to play in the Allstarlink technology. > > Marshall – ke6pcv > > *From:*App_rpt-users > [mailto:app_rpt-users-bounces at lists.allstarlink.org] *On Behalf Of > *Steven Donegan > *Sent:* Thursday, February 23, 2017 10:26 AM > *To:* Users of Asterisk app_rpt > *Subject:* Re: [App_rpt-users] parallel port use > > For the Pi I would suggest just using the I/O pins on the board rather > than a USB thingie :-) > > Steven Donegan > KK6IVC General Class FCC License > FAA PP-ASEL Pilots License > Silver State Car #86 > www.sscc.us <http://www.sscc.us> > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users at lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170225/cea48598/attachment.html> ------------------------------ Subject: Digest Footer _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ------------------------------ End of App_rpt-users Digest, Vol 96, Issue 55 *********************************************
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170226/e650486d/attachment.html>