[App_rpt-users] RTCM Going Off Line - Trimble Loosing Lock

[Jesse Lloyd]

I've had problems with the VHF transmitter antennas being too close to the GPS antenna and RF swamping it. If you go to site and use the Trimble software to see satellite signal data then key the transmitter, mine would show a loss of almost all the satellites.  

Cheers,
Jesse

> On Jul 10, 2017, at 1:17 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
> 
> My RTCM, two of then actually on the same Trimble, are loosing lock of late. The output from the RTCM Debug mode 40 is shown below. I read that all zeros was good but I'm wondering 08 and 04 in the last byte mean. Does any know how to decode this?
> 
> 
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 08
> GPS-DEBUG: TSIP: ok 0, 9 - 14: 00 00 00 00 00 04
> 07/10/2017 20:08:22.160  GPS signal lost entirely. Starting again...
> 07/10/2017 20:08:22.160  Host Connection Lost (Pri) (192.168.1.6)
> GPS-DEBUG: TSIP: ok 0, 9 - 14: 00 00 00 00 00 04
> GPS Receiver Active, waiting for aquisition
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00
> GPS signal acquired
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00
> 07/10/2017 20:08:26.160  Time now syncronized to GPS
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00
> 07/10/2017 20:08:26.500  Host Connection established (Pri) (192.168.1.6)
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00
> GPS-DEBUG: TSIP: ok 1, 9 - 14: 00 00 00 00 00 00
> 
> 
> -- 
> --
> Tim
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170710/5d0ed977/attachment.html>