[App_rpt-users] First Time Install with some issues..
Steve Siesel
steve at siesel.net
Fri Jun 2 15:38:07 UTC 2017
Yes! I did set up extensions.conf as well.
>From iax.conf:
[k4ksa]
username=steve
type=friend
context=myphone
host=dynamic
auth=md5
secret=xxxxxxxxx
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no
;callerid=K4KSA
>From extensions.conf:
[myphone]
;Settings for Zoiper
exten => 46031,1,answer() ;Change the node number on all these lines to your ow$
exten => 46031,n,Playback(rpt/node)
exten => 46031,n,Playback(digits/4) ; change the playback digits to your node a$
exten => 46031,n,Playback(digits/1)
exten => 46031,n,Playback(digits/7)
exten => 46031,n,Playback(digits/6)
exten => 46031,n,Playback(digits/4)
exten => 46031,n,Playback(rpt/connected)
exten => 46031,n,rpt(46031|Pv) ; Change both numbers here to your node
Also any idea why I can’t connect from the allstarlink telephone portal?
Steve
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Bob Pyke
Sent: Friday, June 02, 2017 10:47 AM
To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
Subject: Re: [App_rpt-users] First Time Install with some issues..
Item 1, does not concern me. with respect to 2 & 3, how did you setup extensions.conf? Did you set it up for zoiper?
Thanks,
Bob
k6ecm
73
Sent from iPad
On Jun 1, 2017, at 6:55 PM, Steve Siesel <steve at siesel.net <mailto:steve at siesel.net> > wrote:
All,
Here is what my problems are:
1. Getting the following in my asterisk trace:
[Jun 1 21:33:22] WARNING[587] chan_iax2.c: REGISTER-LOG: registry rereqquest
[Jun 1 21:34:12] WARNING[588] chan_iax2.c: REGISTER-LOG: Sending registration request for '46031'
[Jun 1 21:34:12] WARNING[580] chan_iax2.c: REGISTER-LOG: registry rereqquest
However my iax2 show registry shows:
DMRLink*CLI> iax2 show registry
Host dnsmgr Username Perceived Refresh State
67.215.233.178:4569 Y 46031 47.203.114.127:1025 60 Registered
2. I have port forwarded both udp and tcp 4569 to the Allstar node. I have also added the following to iax.conf for Zopier access:
[k4ksa]
username=steve
type=friend
context=myphone
host=dynamic
auth=md5
secret=xxxxxxx
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no
;callerid=K4KSA
I have also added the context to extensions.conf as well.
This is what I am getting in the asterisk trace when trying to register (also getting error 29 from Zopier)
[Jun 1 21:35:35] NOTICE[585] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127)
[Jun 1 21:35:37] NOTICE[582] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127)
[Jun 1 21:35:40] NOTICE[585] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127)
3. Telephone access from Allstar. When using the dial in telephone number trying to get voice or function access it times out with a busy signal. I did a tcpdump port 4569 and I can see the telephone service making It to the machine:
21:43:29.564494 IP seal.lambdatel.com.iax > DMRLink.home.iax: UDP, length 96
21:43:29.565075 IP DMRLink.home.iax > seal.lambdatel.com.iax: UDP, length 65
Using RAT RC1
Anyone have any thoughts to my three problems?
Steve
K4KSA
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170602/2e695fa9/attachment.html>
More information about the App_rpt-users
mailing list