[App_rpt-users] RPi 3 controller problem

[Bryan Taylor]

I run my node and allmon2 on a 6 core desktop so I can't comment on running it on a pi3.

 I do run my allstar hub on a pi3 with 10 nodes connected in to it and as high as 12 echolink users simultaneously with no trouble. Any time we have heard dropouts it has been in the remote end.

All on cat6 gigabit connections back to the router, using cable modem with 150 down and 80 up.

Sent from my iPhone

> On Mar 16, 2017, at 2:51 PM, Steve Agee <irlp8720 at yahoo.com> wrote:
> 
> I'm wondering about the load Allmon2 is placing on the system. I know it is more efficient than the original Allmon, but I've never entertained the idea that the Pi3 could handle that much at once. Is anyone else running Allmon2 on their Pi?
> 
> N5ZUA
> 
>> On 3/16/2017 12:17 PM, Steve Zingman wrote:
>> Bill,
>> Thanks for a complete description of your system, that helps a lot.
>> I did see Bryan's response about Wifi. I would say it's possible. Maybe a sustained ping to see if it's dropping packets.
>> Do the dropouts happen on inbound network transmissions or receiver input or both?
>> Since you are running SNMP, how is the CPU load?
>> Which channel driver are you running?
>> 
>> 73, Steve N4IRS 
>> 
>>> On 3/16/2017 1:06 PM, William Higgins wrote:
>>> Good day!
>>> 
>>> We have recently replaced the CAT-200 controller on our repeater with a Raspberry Pi 3 running the Dial RC1 distribution.  Mostly it seems to be working ok, but we are getting relatively frequent audio dropouts in the middle of conversations.  At times we can go for several minutes of conversation without a dropout, and at other times, it seems like it happens a lot more frequently.  Sometimes it's just for a couple of tenths of a second and sometimes it's up to a few seconds long.  So far I have had no luck in trying to track down the cause of this.  Any thoughts anyone might have about what might be happening or where to look next would be appreciated.
>>> 
>>> Some details about our config:
>>> 
>>> Raspberry Pi 3 with DIAL RAT_RC1.img
>>> Repeater Builder RB-USB Rim Lite Interface
>>> Vertex VXR-7000 Repeater
>>> Metallic case for the Pi
>>> Modular connectors and Cat-7 cable for the interface with snap-on chokes at both ends
>>> Pi is connected to the local network via Wifi (We are prepared to move this to Ethernet, but need approval of the host to do so)
>>> Pi is connected to an external server via OpenVPN for collection of mgmt. statistics via SNMP
>>> Pi also runs Apache2 and Allmon2
>>> Echolink is enabled (Node 746074)
>>> AllStarLink of course (Node 44011)
>>> 
>>> Thanks in advance for any thoughts or help you might be able to give!
>>> 
>>> Bill Higgins
>>> N0NOE
>>> 
>>> KC0DBS repeater on 44011
>>> N0NOE simplex on 43758
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170316/e2a3c06f/attachment.html>