[App_rpt-users] RPi 3 controller problem

[Steve Zingman]

Off list:
Bill,
What can you tell me about your SNMP monitoring. Nothing to do with your 
issue. I am considering adding SNMP to ASL.
I'll comment on the list about your issue, so it gets archived and all 
can read.

73, Steve

On 3/16/2017 1:48 PM, William Higgins wrote:
> Let's see if I can answer the questions that have been asked:
>
> Steve Zingman:  I believe the dropouts are primarily on receiver 
> input.  I've not noticed them on Echolink inbound traffic.  The CPU 
> load is minimal.  Generally under 2% used. We are using USB_RADIO 
> without DSP (I couldn't make that work initially for some reason.)
>
> Steve Agee:  As I said, the CPU load is minimal.  There might be tiny 
> momentary peaks, but there is no sustained load on the processor.
>
> Neil K8it:  The wireless connectivity doesn't "seem" to be a problem.  
> The router to which it is connected is only about 4 ft. away.
>
> Thank you all for the suggestions.  Would love to hear any other ideas 
> you have!
>
> Bill Higgins
> N0NOE
>
> KC0DBS - 44011
> N0NOE - 43758
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170316/303e7b7d/attachment.html>