[App_rpt-users] Node numbering

[Corey Dean]

As long as you have the number node numbers defined with the IP address and port in rpt.conf and they have the forwarding setup correctly they should work just fine.

Corey. N3FE

Sent from my iPhone

> On Mar 26, 2017, at 7:13 PM, Leighton Judd <leighton.judd at gmail.com> wrote:
> 
> Hi All,
> 
> I have recently started experimenting with app_rpt. 
> 
> I am wondering if there are any restrictions on numbering of private nodes? 
> 
> I have set up two nodes on the same machine for a test. They are each set up as a "hub" with numbers 2222 and 3333. 
> 
> Using the asterisk console, I can connect successfully from node 3333 to node 2222. Trying to connect from node 2222 to node 3333 does not work. This seems to be true for node numbers, that I have tested, beginning with 3000.
> 
> This connects:
> rpt cmd 3333 ilink 3 2222
> 
> This doesn't connect:
> rpt cmd 2222 ilink 3 3333
> 
> Does anyone know if this is intended or not?
> 
> Regards,
> Leighton 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.