[App_rpt-users] Allstarlink loop?

[Benjamin L. Naber]

Not sure that was necessary..
In any event, before the Allstarlink server(s) were reset about five
days ago prior to today, if the following:
28569 <-> 41575 <-> 45222
and 28569 were to connect to 45297, and the end users on 45297 didn't
know or pay attention that it was connected, and the user on 45297
tried connecting to 45222, the 45297 node would respond with "Remote
already in this mode"
Now, it does not do that.
There was the possibility the possibly allstarlink wasn't aware of
connections made when external node connections were made, if the
external nodes connected were in the rpt.conf. However, prior to five
days ago, the above scenario would be the same.
Something change? What changes are being made to warrant the
allstarlink servers being reset (evidence being the unused nodes all
have the same last ke-up time)
~Benjamin, KB9LFZ
On Mon, 2017-03-27 at 20:54 -0500, Justin Reed wrote:
> I always wondered what would happen if some dipshit did this.
> 
> Question answered ;)
> 
> 73,
> Justin
> NV8Q
> 
> 
> On 3/27/2017 8:14 PM, Benjamin L. Naber wrote:
> > Uh, I was under the impression this wasn't possible, have a look at
> > a
> > the picture. 
> > 
> > If I don't break the connection using the almight *4 command, as
> > someone on the 45297 insists on using the permanent link command,
> > have
> > a look-see at my node, 28569
> > 
> > 
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > 
> > To unsubscribe from this list please visit http://lists.allstarlink
> > .org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> > bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a
> > message to the list detailing the problem. 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.o
> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a
> message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170327/be86dfa6/attachment.html>