[App_rpt-users] RTCM Simulcast and 9.6 MHz Phase locking
Bryan Fields
bryan at bryanfields.net
Fri May 12 20:02:13 UTC 2017
He built a few for a friend of mine and I will have them at Dayton. Hit me up directly and I'll see if we have a few to spare.
--
Bryan Fields
M: +1-727-409-1194
> On May 12, 2017, at 15:53, Tim Sawyer <tisawyer at gmail.com> wrote:
>
> The PCGM used to be manufactured by micro-node.com which came with an enclosure similar to the RTCM http://micro-node.com/_img/rtcm1-750.jpg but smaller.
>
> Mark at micro-node.com said he was thinking of building another batch (25 or so) of PCGMs as he is seeing some demand.
>
>> On Fri, May 12, 2017 at 12:08 PM, Joe Leikhim <rhyolite at leikhim.com> wrote:
>> I have searched for documentation on the PCGM. can you point me to the enclosure?
>>
>>> On 5/11/2017 11:12 PM, Tim Sawyer wrote:
>>> The one it comes with.
>>>
>>>> On Mon, May 8, 2017 at 11:24 PM, Joe Leikhim <rhyolite at leikhim.com> wrote:
>>>> I wonder what kind of enclosure he had it in?
>>>>
>>>>> On 5/8/2017 11:10 PM, Tim Sawyer wrote:
>>>>> The PCGM were noisy. I know of a case where a ham using one was shut down by the site owner. Seems the PCGM was emitting a interfering signal on high band, around 158 Mhz.
>>>>>
>>>>>> On Mon, May 8, 2017 at 1:33 PM, Bryan Fields <bryan at bryanfields.net> wrote:
>>>>>> I've been following this with some interest. One of the fundamental issues with the PCGM was the master clock going to the radio was unable to be modulated. This made low frequency signals (PL) distort, and digital PL was even worse.
>>>>>>
>>>>>> Typically most radios use two point modulation, with modulation on the reference oscillator. When you add an external reference you loose this.
>>>>>>
>>>>>> Some base stations are designed to do two point modulation even on an external clock, the Quantar for example. This station will even phase lock it's PL and DPL generation if provided a 1 PPS in addition to a clock.
>>>>>>
>>>>>> If we could inject modulation into the clock generator simulcast performance would vastly improve. I'd be interested to see your design to see if this would be a possibility.
>>>>>>
>>>>>> Thoughts?
>>>>>>
>>>>>> --
>>>>>> Bryan Fields
>>>>>> M: +1-727-409-1194
>>>>>>
>>>>>> On May 8, 2017, at 14:15, Reid Brandon <rfpowerguy at yahoo.com> wrote:
>>>>>>
>>>>>>> Hi Joe,
>>>>>>> I got a page with a pic of a man that rotated around saying DOWNLOAD NOT FOUND.
>>>>>>> Try again!?
>>>>>>> Tks Reid
>>>>>>>
>>>>>>>
>>>>>>> On Sunday, May 7, 2017 12:25 PM, Pierre Martel <petem001 at gmail.com> wrote:
>>>>>>>
>>>>>>>
>>>>>>> I am very interrested in all this project. My email is VE2PF @ VE2MRC dot com!
>>>>>>>
>>>>>>> what radio did you used for the project?
>>>>>>>
>>>>>>> Thanks for sharing!
>>>>>>>
>>>>>>> Pierre
>>>>>>> VE2PF
>>>>>>>
>>>>>>>
>>>>>>> 2017-05-07 12:32 GMT-04:00 Kevin Custer <kuggie at kuggie.com>:
>>>>>>> Joe,
>>>>>>>
>>>>>>> Why not consider do it as an article for Repeater Builder?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Kevin
>>>>>>>
>>>>>>>
>>>>>>> On 5/7/2017 3:13 AM, Joe Moskalski wrote:
>>>>>>> I wanted to throw this email out to the group for all those who want to simulcast with the RTCM. For those who don't know, in order to make the RTCM suitable for simulcast you must have a more accurate 9.6 MHz clock for the RTCM in order to ensure the audio sounds acceptable in the overlap areas. I did this a few months ago using 9.6 MHz OCXO's. This worked reasonably well. Not as well as I would have liked but the system was very usable, but of course I wanted it to be better. Since the PCGM (Programmable Clock Generation Module) is no longer available, I decided to roll my own as some say.
>>>>>>> I created a PLL circuit that can accept a 10 MHz, 1 MHz or 100 KHz reference input and produce a phase locked 9.6 MHz out for the RTCM. I have been testing this over the past few days and it has made an great improvement in the audio quality in the overlap. The quality of the audio in the overlap areas sounds very, very good, it's very similar to what I expect to hear in commercial simulcast systems. My circuit is heavily based off of an old Motorola MSF5000 HSO PLL circuit that I was able to adapt and modify to my needs. There are other uses for this circuit that make it attractive for simulcasting but I wont get into them here. I am will to share my schematic and bill of materials (digikey) with anyone. Please send me an email and I will be willing to share all of my information on the project.
>>>>>>>
>>>>>>> ______________________________ _________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at lists.allstarlin k.org
>>>>>>> http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users
>>>>>>>
>>>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>
>>>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>
>>>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>>>
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> --
>>>>> Tim
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> --
>>>> Joe Leikhim
>>>>
>>>>
>>>> Leikhim and Associates
>>>>
>>>> Communications Consultants
>>>>
>>>> Oviedo, Florida
>>>>
>>>> JLeikhim at Leikhim.com
>>>>
>>>> 407-982-0446
>>>>
>>>> WWW.LEIKHIM.COM
>>>> _______________________________________________ App_rpt-users mailing list App_rpt-users at lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>> --
>>> --
>>> Tim
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> --
>> Joe Leikhim
>>
>>
>> Leikhim and Associates
>>
>> Communications Consultants
>>
>> Oviedo, Florida
>>
>> JLeikhim at Leikhim.com
>>
>> 407-982-0446
>>
>> WWW.LEIKHIM.COM
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> --
> --
> Tim
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170512/7d015bd6/attachment.html>
More information about the App_rpt-users
mailing list