[App_rpt-users] Temporary stop, then restart asterisk

[Steve Zingman]

OK,
/etc/init.d/asterisk stop <--- Stop asterisk
killall -9 asterisk <---------------- Make sure it's dead
ps ax | grep asterisk <--- Check to see if it's really dead

/etc/init.d/asterisk start <--- start asterisk
ps ax | grep asterisk <--- Check to see if it's really started

The newer release candidate fixes this.

73, Steve N4IRS


On 5/26/2017 11:37 AM, Bob Pyke wrote:
> No. It will be off for several minutes, but I want it to stop when commanded, and start on command. We are conducting an exercise. I don't know the version, and logging into the node does not say. We've been operating, pretty much since the introduction of app_rpt on the RPi
>
> Thanks
>
> Sent from my iPhone
>
>> On May 26, 2017, at 8:31 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>
>> Bob,
>> Are you talking about "bouncing" asterisk? A stop followed by a rapid start? Which distribution and version are you running?
>>
>> 73, Steve N4IRS
>>
>>> On 5/26/2017 11:28 AM, Bob Pyke wrote:
>>> I have a need to temporarily disable the repeater, then enable it. Timing is critical, so a delay is undesirable. What is the best way to accomplish this? I will be logged into the node.
>>>
>>> Thanks,
>>> Bob
>>> Sent from my iPhone
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.