[App_rpt-users] No Receive Audio Since Dial Swithover

[K7ILO]

Hey Steve.

Yes I did.
But it seems that I have a bad audio fob but luckily I had another one just like the one I was using and all is working well now.
This is the first time that Ive had a chance to set things back up after you manually installed DIAL onto this machine of mine, so this is why it took a few weeks to figure this was happening.
Thanks for the response.

Oh yeah, how is the usb-serial adapter for COR, PTT and so forth coming?
Keep me in the loop.

Thanks again.

Harold

-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Steve Zingman
Sent: Tuesday, May 30, 2017 2:54 AM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] No Receive Audio Since Dial Swithover

Harold,
Did you run radio-tune-menu to set levels?

On 05/30/2017 02:23 AM, K7ILO wrote:
> Hey Gang.
>
> First,  I have no idea of where to start looking so this is why I'm asking this.
> Second, I know this has probably been solved through the group here so forgive me since I hadn’t checked this email in some time.
>
> I was recently upgraded to the DIAL distro of allstar and I am using the same usbradio.conf file I used under ACID.
> Now, I do not have any receive (inbound) audio but I do have transmit (outbound) audio.
> Is there some new mixer settings that has been added to DIAL or new parameters I need to configure?
>
> Thanks all for any assistance.
>
> Harold
> K7ILO
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.