[App_rpt-users] Micro-Node RTCM

Wed Oct 18 08:23:32 UTC 2017

Hi Randy,

Apparently they moved it send an email to Steve Zingman he is in charge of the migration. szingman at msgstor.com

Mark

From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Randy Neals
Sent: Wednesday, October 18, 2017 12:56 AM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Micro-Node RTCM

Looking for a pointer on where I can find current firmware for RTCMs?
Formerly the firmware was at  <http://svn.ohnosec.org/viewvc/projects/allstar/voter/board-firmware/?root=svn> http://svn.ohnosec.org/viewvc/projects/allstar/voter/board-firmware/?root=svn
That link now seems dead.

Where would an RTCM owner find the latest firmware...

Thanks,
Randy
W3RWN

On Tue, Apr 25, 2017 at 10:26 PM, Mark Guibord <mark at micro-node.com> wrote:

The RTCM uses a 16 bit DSP with a tightly integrated interrupt driven firmware package written in c 

http://www.microchip.com/wwwproducts/en/dsPIC33FJ128GP804

If you're interested here is a link to the open-source software for the RTCM.. 

http://svn.ohnosec.org/viewvc/projects/allstar/voter/board-firmware/?root=svn

From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Doug Kingston
Sent: Tuesday, April 25, 2017 9:41 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Micro-Node RTCM

I know that I would have a GPS with 1pps feed to get the timing.  Once you have that, what is different in an RTCM other than nice packaging?

What is the core processor technology inside the RTCM.  I am assuming is some form of ARM processor.  Can you can you get a root shell and use SSH to access?

-Doug-

On Tue, Apr 25, 2017 at 7:50 PM, Fredric Moses <fred at moses.bz> wrote:

You seem confused… you still need a linux system running app_rpt with the RTCM’s…  think of the RTCM as an ethernet based radio interface vs usb.. But that radio interface when you add GPS to each one can do voting with others.. and with some more work simulcast transmitting…

We have some 50-60 RTCM’s deployed and love them… Getting ready to rebuild another clubs VHF repeater voter system with a 6 site RTCM based voting system.  I just started testing the new hamvoip rPi3 image with some rtcm’s myself...

--
Fredric Moses - W8FSM - WQOG498
fred at moses.bz

> On Apr 25, 2017, at 22:32, Doug Kingston <dpk at randomnotes.org> wrote:
>
> I am considering using these for a amateur repeater voting application.  The alternative would be to roll my own with a Raspberry Pi 3 and probably the HamVOIP.org distribution.  Who out there is using the RTCM?  I can find very little information beyond the manual and I am concerned that the software may not be maintained and that there is not enough access to the underlying Linux system.
>
> Who can tell me more about the RTCM?
>
> Has anyone rolled their own with a Pi3?  Any advice there?
>
> -Doug-

> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171018/248adadd/attachment.html>