[App_rpt-users] Micro-Node RTCM

[Randy Neals]

Thanks Mark & Steve!

On Wed, Oct 18, 2017 at 2:29 AM, Steve Zingman <szingman at msgstor.com> wrote:

> <https://github.com/AllStarLink/voter/tree/master/board-firmware>
> <https://github.com/AllStarLink/voter/tree/master/board-firmware>
>
> 73, Steve N4IRS
>
>
> On 10/18/2017 03:55 AM, Randy Neals wrote:
>
> Looking for a pointer on where I can find current firmware for RTCMs?
> Formerly the firmware was at http://svn.ohnosec.org/viewvc/projects/
> allstar/voter/board-firmware/?root=svn
> That link now seems dead.
>
> Where would an RTCM owner find the latest firmware...
>
> Thanks,
> Randy
> W3RWN
>
>
> On Tue, Apr 25, 2017 at 10:26 PM, Mark Guibord <mark at micro-node.com>
> wrote:
>
>> The RTCM uses a 16 bit DSP with a tightly integrated interrupt driven
>> firmware package written in c
>>
>>
>>
>> http://www.microchip.com/wwwproducts/en/dsPIC33FJ128GP804
>>
>>
>>
>> If you're interested here is a link to the open-source software for the
>> RTCM..
>>
>>
>>
>> http://svn.ohnosec.org/viewvc/projects/allstar/voter/board-f
>> irmware/?root=svn
>>
>>
>>
>> *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
>> *On Behalf Of *Doug Kingston
>> *Sent:* Tuesday, April 25, 2017 9:41 PM
>> *To:* Users of Asterisk app_rpt
>> *Subject:* Re: [App_rpt-users] Micro-Node RTCM
>>
>>
>>
>> I know that I would have a GPS with 1pps feed to get the timing.  Once
>> you have that, what is different in an RTCM other than nice packaging?
>>
>> What is the core processor technology inside the RTCM.  I am assuming is
>> some form of ARM processor.  Can you can you get a root shell and use SSH
>> to access?
>>
>>
>>
>> -Doug-
>>
>>
>>
>> On Tue, Apr 25, 2017 at 7:50 PM, Fredric Moses <fred at moses.bz> wrote:
>>
>> You seem confused… you still need a linux system running app_rpt with the
>> RTCM’s…  think of the RTCM as an ethernet based radio interface vs usb..
>> But that radio interface when you add GPS to each one can do voting with
>> others.. and with some more work simulcast transmitting…
>>
>> We have some 50-60 RTCM’s deployed and love them… Getting ready to
>> rebuild another clubs VHF repeater voter system with a 6 site RTCM based
>> voting system.  I just started testing the new hamvoip rPi3 image with some
>> rtcm’s myself...
>>
>> --
>> Fredric Moses - W8FSM - WQOG498
>> fred at moses.bz
>>
>>
>> > On Apr 25, 2017, at 22:32, Doug Kingston <dpk at randomnotes.org> wrote:
>> >
>> > I am considering using these for a amateur repeater voting
>> application.  The alternative would be to roll my own with a Raspberry Pi 3
>> and probably the HamVOIP.org distribution.  Who out there is using the
>> RTCM?  I can find very little information beyond the manual and I am
>> concerned that the software may not be maintained and that there is not
>> enough access to the underlying Linux system.
>> >
>> > Who can tell me more about the RTCM?
>> >
>> > Has anyone rolled their own with a Pi3?  Any advice there?
>> >
>> > -Doug-
>>
>> > _______________________________________________
>> > App_rpt-users mailing list
>> > App_rpt-users at lists.allstarlink.org
>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> >
>> > To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> > You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171018/5f56e784/attachment.html>