[App_rpt-users] RTCM Inbound (Eth Rx) packet out of bounds

[Hayden Honeywood]

Thanks for your reply Pierre,

I read on the forums here that a lot of users put their RTCM's into 10Mbps
1/2 duplex, as it fixes stability issues with the Ethernet. In fact it is
that by default when you load the firmware.

The only other device on the network LAN at the main site is the repeater
controller (running at 100Mbps).

The test one at home is running into a 16 port switch with many other
computers connected to the switch. I'm not sure how much broadcast traffic
is sent around however.

Hayden
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170927/eb1f5ad9/attachment.html>