From tisawyer at gmail.com  Sun Apr  1 02:02:23 2018
From: tisawyer at gmail.com (Tim Sawyer)
Date: Sat, 31 Mar 2018 19:02:23 -0700
Subject: [App_rpt-users] Adding public node setup to private node
In-Reply-To: <DB2A584A-ED55-4D69-B81C-F257F83A1093@me.com>
References: <DB2A584A-ED55-4D69-B81C-F257F83A1093@me.com>
Message-ID: <CAG3ht9sf9=45z2+u9p=rQMR7bZK1zD8efxQ2nE9epgoYRrEuyA@mail.gmail.com>

Do the private nodes key the public note and visa-visa, or is it only audio
that is not working?

On Sat, Mar 31, 2018 at 3:58 PM, Bryan Taylor <overnite at me.com> wrote:

>
> Hey all,
>
> Quick question hopefully. I have 15 private nodes connecting to a hub, on
> one of the private nodes i want to add public Allstar access using a public
> node I have setup on allstarlink.org. I have added a section to rpt.conf
> for the public node, added it?s ip address in the nodes section. The
> private node and public node will be on the same raspberry pi. Ports and
> all that stuff are setup, the simpleusb/rf side works perfectly.
>
> I did not edit anything in the extensions.conf as radio-secure is using
> variables instead of hardcoded node numbers.  I also did not edit anything
> in simpleusb.conf as the public side is set to use dahdi/pseudo.
>
> I also added the registration line and also enabled status reporting. I
> have the private node using a simplex setup, with one radio and one uri and
> using simpleusb.conf. I have the public node setup using dahdi/pseudo, I
> connect the public node to the hub and all seems well, the node shows up on
> allstarlink and is green, I can connect to it using the web transceiver.
> However no audio ever gets passed through in or out. Seems it doesn?t
> receive anything and never sends anything.
>
> Did I miss something? Do I need to add more details?
>
> Thanks
> Bryan
> Vo1mxz
>
> Sent from my iPhone
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.




-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180331/d61eb19a/attachment.html>

From overnite at me.com  Sun Apr  1 14:10:23 2018
From: overnite at me.com (Bryan Taylor)
Date: Sun, 01 Apr 2018 11:40:23 -0230
Subject: [App_rpt-users] Adding public node setup to private node
In-Reply-To: <CAG3ht9sf9=45z2+u9p=rQMR7bZK1zD8efxQ2nE9epgoYRrEuyA@mail.gmail.com>
References: <DB2A584A-ED55-4D69-B81C-F257F83A1093@me.com>
 <CAG3ht9sf9=45z2+u9p=rQMR7bZK1zD8efxQ2nE9epgoYRrEuyA@mail.gmail.com>
Message-ID: <3FD8701D-A402-46F0-A3A5-FD30B071EB20@me.com>

Got it, forgot to update port for private node on hub. I changed it back to 4569 to make registering on Allstar simpler. Forgot to update it in rpt.conf on hub. All good now working perfectly. Silly mistake thanks Tim.

Bryan
Vo1mxz
Sent from my iPhone

> On Mar 31, 2018, at 11:32 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
> 
> Do the private nodes key the public note and visa-visa, or is it only audio that is not working?
> 
>> On Sat, Mar 31, 2018 at 3:58 PM, Bryan Taylor <overnite at me.com> wrote:
>> 
>> Hey all,
>> 
>> Quick question hopefully. I have 15 private nodes connecting to a hub, on one of the private nodes i want to add public Allstar access using a public node I have setup on allstarlink.org. I have added a section to rpt.conf for the public node, added it?s ip address in the nodes section. The private node and public node will be on the same raspberry pi. Ports and all that stuff are setup, the simpleusb/rf side works perfectly.
>> 
>> I did not edit anything in the extensions.conf as radio-secure is using variables instead of hardcoded node numbers.  I also did not edit anything in simpleusb.conf as the public side is set to use dahdi/pseudo.
>> 
>> I also added the registration line and also enabled status reporting. I have the private node using a simplex setup, with one radio and one uri and using simpleusb.conf. I have the public node setup using dahdi/pseudo, I connect the public node to the hub and all seems well, the node shows up on allstarlink and is green, I can connect to it using the web transceiver.
>> However no audio ever gets passed through in or out. Seems it doesn?t receive anything and never sends anything.
>> 
>> Did I miss something? Do I need to add more details?
>> 
>> Thanks
>> Bryan
>> Vo1mxz
>> 
>> Sent from my iPhone
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> 
> 
> -- 
> Tim WD6AWP
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180401/6745cef6/attachment.html>

From tisawyer at gmail.com  Sun Apr  1 14:54:44 2018
From: tisawyer at gmail.com (Tim Sawyer)
Date: Sun, 1 Apr 2018 07:54:44 -0700
Subject: [App_rpt-users] Adding public node setup to private node
In-Reply-To: <3FD8701D-A402-46F0-A3A5-FD30B071EB20@me.com>
References: <DB2A584A-ED55-4D69-B81C-F257F83A1093@me.com>
 <CAG3ht9sf9=45z2+u9p=rQMR7bZK1zD8efxQ2nE9epgoYRrEuyA@mail.gmail.com>
 <3FD8701D-A402-46F0-A3A5-FD30B071EB20@me.com>
Message-ID: <CAG3ht9s+YJiv6XcyoiJL=U=yDfgF+p0jJFtpG=Kufp4zcs0f9g@mail.gmail.com>

I usually find those mistakes about two seconds after I post for help.
<sheepish grin>

On Sun, Apr 1, 2018 at 7:10 AM, Bryan Taylor <overnite at me.com> wrote:

> Got it, forgot to update port for private node on hub. I changed it back
> to 4569 to make registering on Allstar simpler. Forgot to update it in
> rpt.conf on hub. All good now working perfectly. Silly mistake thanks Tim.
>
> Bryan
> Vo1mxz
> Sent from my iPhone
>
> On Mar 31, 2018, at 11:32 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
>
> Do the private nodes key the public note and visa-visa, or is it only
> audio that is not working?
>
> On Sat, Mar 31, 2018 at 3:58 PM, Bryan Taylor <overnite at me.com> wrote:
>
>>
>> Hey all,
>>
>> Quick question hopefully. I have 15 private nodes connecting to a hub, on
>> one of the private nodes i want to add public Allstar access using a public
>> node I have setup on allstarlink.org. I have added a section to rpt.conf
>> for the public node, added it?s ip address in the nodes section. The
>> private node and public node will be on the same raspberry pi. Ports and
>> all that stuff are setup, the simpleusb/rf side works perfectly.
>>
>> I did not edit anything in the extensions.conf as radio-secure is using
>> variables instead of hardcoded node numbers.  I also did not edit anything
>> in simpleusb.conf as the public side is set to use dahdi/pseudo.
>>
>> I also added the registration line and also enabled status reporting. I
>> have the private node using a simplex setup, with one radio and one uri and
>> using simpleusb.conf. I have the public node setup using dahdi/pseudo, I
>> connect the public node to the hub and all seems well, the node shows up on
>> allstarlink and is green, I can connect to it using the web transceiver.
>> However no audio ever gets passed through in or out. Seems it doesn?t
>> receive anything and never sends anything.
>>
>> Did I miss something? Do I need to add more details?
>>
>> Thanks
>> Bryan
>> Vo1mxz
>>
>> Sent from my iPhone
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
>
>
> --
> Tim WD6AWP
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180401/943508ba/attachment.html>

From John at n2yp.com  Tue Apr  3 01:33:36 2018
From: John at n2yp.com (John Rudolph- N2YP)
Date: Mon, 02 Apr 2018 21:33:36 -0400
Subject: [App_rpt-users] USB hubs
Message-ID: <B02CAFD4-707C-4DAE-89A9-1822A758B6C2@n2yp.com>

Has anyone successfully used a USB hub for multiple nodes? If so what model have you used?  Do we still need to locate a multi TT hub or do the newer usb 3.0 hubs work fine?
John Rudolph
Amateur Radio Op N2YP
Unadilla,NY
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180402/ee97a105/attachment.html>

From dwaters5 at yahoo.com  Thu Apr  5 11:07:19 2018
From: dwaters5 at yahoo.com (David Waters)
Date: Thu, 5 Apr 2018 07:07:19 -0400
Subject: [App_rpt-users] Briadcastify
Message-ID: <5994D260-45E9-420D-96D1-AF7C8A21B029@yahoo.com>

I was streaming my node?s audio to scanners using broadcastify. It quit working 4 days ago. Everything is the same all files and config files to run it are in my node but it will not stream audio. I try to start it manually and I get error file not found. But as I said all files and directories are there. All files match what they were before when it worked, but it doesn?t work. I tried to download the files needed again but I can not because it says files are in my node. I am at a loss not sure where to go. I don?t know how to remove all files from node to start over.
Looking for serious help.
AB3MZ

David Waters


From lengriff at optimum.net  Thu Apr  5 16:34:19 2018
From: lengriff at optimum.net (lengriff at optimum.net)
Date: Thu, 5 Apr 2018 12:34:19 -0400 (Eastern Daylight Time)
Subject: [App_rpt-users] Stretch image install not working
Message-ID: <5AC6500A.00005D.11404@LEAPER-PC>

I downloaded the newest Pi Stretch img from the repository, and wrote it to
a 4Gig micro-SD card. I logged in as repeater, and changed the password as
directed.
I followed directions in the readme file. It boots fine, but fails to get
updates with apt_get. There are 3 errors:
1] chmod 0700 of directory /var/lib/apt/lists/partial failed -
SetupAPTPartialDirectory ( 1: Operation not permitted )
2] Could not open lock file /var/lib/apt/lists/lock - open (13: permission
denied )
3] Unable to lock directory /var/lib/apt/lists 
Also, after an " asterisk -r ", I get the version number, but asterisk does
not start. The error is: Unable to connect to remote asterisk ( does
/var/run/asterisk.ctl exist?) The file does exist, bit is 0 bytes.

Len
WB2HKK


From szingman at msgstor.com  Thu Apr  5 16:38:12 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Thu, 5 Apr 2018 12:38:12 -0400
Subject: [App_rpt-users] Stretch image install not working
In-Reply-To: <5AC6500A.00005D.11404@LEAPER-PC>
References: <5AC6500A.00005D.11404@LEAPER-PC>
Message-ID: <2fd329c3-7926-1e85-b0b9-f57736d0f17f@msgstor.com>

You must be root to update
sudo -s


On 4/5/2018 12:34 PM, lengriff at optimum.net wrote:
> I downloaded the newest Pi Stretch img from the repository, and wrote it to
> a 4Gig micro-SD card. I logged in as repeater, and changed the password as
> directed.
> I followed directions in the readme file. It boots fine, but fails to get
> updates with apt_get. There are 3 errors:
> 1] chmod 0700 of directory /var/lib/apt/lists/partial failed -
> SetupAPTPartialDirectory ( 1: Operation not permitted )
> 2] Could not open lock file /var/lib/apt/lists/lock - open (13: permission
> denied )
> 3] Unable to lock directory /var/lib/apt/lists
> Also, after an " asterisk -r ", I get the version number, but asterisk does
> not start. The error is: Unable to connect to remote asterisk ( does
> /var/run/asterisk.ctl exist?) The file does exist, bit is 0 bytes.
>
> Len
> WB2HKK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From edpnjax at gmail.com  Thu Apr  5 16:38:28 2018
From: edpnjax at gmail.com (EDPnJAX)
Date: Thu, 5 Apr 2018 12:38:28 -0400
Subject: [App_rpt-users] Stretch image install not working
In-Reply-To: <5AC6500A.00005D.11404@LEAPER-PC>
References: <5AC6500A.00005D.11404@LEAPER-PC>
Message-ID: <A6D8072E-57FE-4B42-8F86-EE0EBA0829D2@gmail.com>

Are you running ?sudo apt-get update? and ?sudo apt-get upgrade??  You have to do these as root.


> On Apr 5, 2018, at 12:34 PM, lengriff at optimum.net wrote:
> 
> I downloaded the newest Pi Stretch img from the repository, and wrote it to
> a 4Gig micro-SD card. I logged in as repeater, and changed the password as
> directed.
> I followed directions in the readme file. It boots fine, but fails to get
> updates with apt_get. There are 3 errors:
> 1] chmod 0700 of directory /var/lib/apt/lists/partial failed -
> SetupAPTPartialDirectory ( 1: Operation not permitted )
> 2] Could not open lock file /var/lib/apt/lists/lock - open (13: permission
> denied )
> 3] Unable to lock directory /var/lib/apt/lists 
> Also, after an " asterisk -r ", I get the version number, but asterisk does
> not start. The error is: Unable to connect to remote asterisk ( does
> /var/run/asterisk.ctl exist?) The file does exist, bit is 0 bytes.
> 
> Len
> WB2HKK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From szingman at msgstor.com  Thu Apr  5 16:47:48 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Thu, 5 Apr 2018 12:47:48 -0400
Subject: [App_rpt-users] Stretch image install not working
In-Reply-To: <5AC6500A.00005D.11404@LEAPER-PC>
References: <5AC6500A.00005D.11404@LEAPER-PC>
Message-ID: <096f8baa-f694-d1f2-cfd7-b4635ac14b6c@msgstor.com>

Len,
I will fix the readme to reflect the need for sudo.

73, Steve N4IRS

On 4/5/2018 12:34 PM, lengriff at optimum.net wrote:
> I downloaded the newest Pi Stretch img from the repository, and wrote it to
> a 4Gig micro-SD card. I logged in as repeater, and changed the password as
> directed.
> I followed directions in the readme file. It boots fine, but fails to get
> updates with apt_get. There are 3 errors:
> 1] chmod 0700 of directory /var/lib/apt/lists/partial failed -
> SetupAPTPartialDirectory ( 1: Operation not permitted )
> 2] Could not open lock file /var/lib/apt/lists/lock - open (13: permission
> denied )
> 3] Unable to lock directory /var/lib/apt/lists
> Also, after an " asterisk -r ", I get the version number, but asterisk does
> not start. The error is: Unable to connect to remote asterisk ( does
> /var/run/asterisk.ctl exist?) The file does exist, bit is 0 bytes.
>
> Len
> WB2HKK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From szingman at msgstor.com  Thu Apr  5 17:08:03 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Thu, 5 Apr 2018 13:08:03 -0400
Subject: [App_rpt-users] Stretch image install not working
In-Reply-To: <5AC6500A.00005D.11404@LEAPER-PC>
References: <5AC6500A.00005D.11404@LEAPER-PC>
Message-ID: <f481bbf0-5ca6-18a4-0031-b613d9d723d5@msgstor.com>

I have updated the readme in the zip and on the site.

73, Steve N4IRS

On 4/5/2018 12:34 PM, lengriff at optimum.net wrote:
> I downloaded the newest Pi Stretch img from the repository, and wrote it to
> a 4Gig micro-SD card. I logged in as repeater, and changed the password as
> directed.
> I followed directions in the readme file. It boots fine, but fails to get
> updates with apt_get. There are 3 errors:
> 1] chmod 0700 of directory /var/lib/apt/lists/partial failed -
> SetupAPTPartialDirectory ( 1: Operation not permitted )
> 2] Could not open lock file /var/lib/apt/lists/lock - open (13: permission
> denied )
> 3] Unable to lock directory /var/lib/apt/lists
> Also, after an " asterisk -r ", I get the version number, but asterisk does
> not start. The error is: Unable to connect to remote asterisk ( does
> /var/run/asterisk.ctl exist?) The file does exist, bit is 0 bytes.
>
> Len
> WB2HKK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From lengriff at optimum.net  Fri Apr  6 14:48:28 2018
From: lengriff at optimum.net (lengriff at optimum.net)
Date: Fri, 6 Apr 2018 10:48:28 -0400 (Eastern Daylight Time)
Subject: [App_rpt-users] Newbie mistake
Message-ID: <5AC788BC.00001D.07568@LEAPER-PC>

I have ASL 1.01 working fine.
We no longer login as ' ROOT ', so commands must be preceeded with ' SUDO '.
Learn somthin' new every day!

Len
WB2HKK


From szingman at msgstor.com  Fri Apr  6 14:53:05 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Fri, 6 Apr 2018 10:53:05 -0400
Subject: [App_rpt-users] Newbie mistake
In-Reply-To: <5AC788BC.00001D.07568@LEAPER-PC>
References: <5AC788BC.00001D.07568@LEAPER-PC>
Message-ID: <7f6265c4-b92c-5fec-1b77-8d9d4e8be9c5@msgstor.com>

You can enable root login if you really want to. You can also do "sudo 
-s" and you no longer have to precede with sudo.

73, Steve N4IRS

On 4/6/2018 10:48 AM, lengriff at optimum.net wrote:
> I have ASL 1.01 working fine.
> We no longer login as ' ROOT ', so commands must be preceeded with ' SUDO '.
> Learn somthin' new every day!
>
> Len
> WB2HKK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From ve3yca at ve3yca.com  Fri Apr  6 17:39:13 2018
From: ve3yca at ve3yca.com (Jason Kendall)
Date: Fri, 6 Apr 2018 13:39:13 -0400
Subject: [App_rpt-users] USB hubs
In-Reply-To: <B02CAFD4-707C-4DAE-89A9-1822A758B6C2@n2yp.com>
References: <B02CAFD4-707C-4DAE-89A9-1822A758B6C2@n2yp.com>
Message-ID: <b423db9e-d03a-ca38-945c-92ce3542700c@ve3yca.com>

The problem with USB Hubs are not the speed at all. It's that hubs are
2.0, and USB Sound cards are 1.1 (Don't believe what the specs say).

Most USB2.0 Hubs only have one translator from 1.1 to 2.0. This is fine
in normal situations because most devices are not real time. Our voice
systems require multiple near-realtime data transfers which all have to
share that one is "Multi-TT". Multi-TT hubs usually (in the ones I've
seen) have 1 translator per port instead of the single shared one.

I personally have used https://www.amazon.ca/gp/product/B00SZ2DPU2 both
at home to support multiple USB Sound Cards for Mixing audio - and
within the past 6 months put this one at VE3LSR with zero issues.

Choosing others, your millage will very, but look for a "Multi-TT" Hub.

Cheers and 73,
VE3YCA


On 4/2/18 9:33 PM, John Rudolph- N2YP wrote:
> Has anyone successfully used a USB hub for multiple nodes? If so what
> model have you used? Do we still need to locate a multi TT hub or do
> the newer usb 3.0 hubs work fine?
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/ac7cea87/attachment.html>

From kb4fxc at inttek.net  Fri Apr  6 18:01:37 2018
From: kb4fxc at inttek.net (David McGough)
Date: Fri, 6 Apr 2018 14:01:37 -0400 (EDT)
Subject: [App_rpt-users] USB hubs
In-Reply-To: <b423db9e-d03a-ca38-945c-92ce3542700c@ve3yca.com>
Message-ID: <Pine.LNX.4.44.1804061359010.16814-100000@goliath.inttek.net>


Yes, that model multi-TT hub works well. I've got several of them, they 
go by various brand names, but the same UH-217C-US model number.

...That model is getting scarce these days, unfortunately.

73, David KB4FXC



On Fri, 6 Apr 2018, Jason Kendall wrote:

> The problem with USB Hubs are not the speed at all. It's that hubs are
> 2.0, and USB Sound cards are 1.1 (Don't believe what the specs say).
> 
> Most USB2.0 Hubs only have one translator from 1.1 to 2.0. This is fine
> in normal situations because most devices are not real time. Our voice
> systems require multiple near-realtime data transfers which all have to
> share that one is "Multi-TT". Multi-TT hubs usually (in the ones I've
> seen) have 1 translator per port instead of the single shared one.
> 
> I personally have used https://www.amazon.ca/gp/product/B00SZ2DPU2 both
> at home to support multiple USB Sound Cards for Mixing audio - and
> within the past 6 months put this one at VE3LSR with zero issues.
> 
> Choosing others, your millage will very, but look for a "Multi-TT" Hub.
> 
> Cheers and 73,
> VE3YCA
> 
> 
> On 4/2/18 9:33 PM, John Rudolph- N2YP wrote:
> > Has anyone successfully used a USB hub for multiple nodes? If so what
> > model have you used? Do we still need to locate a multi TT hub or do
> > the newer usb 3.0 hubs work fine?
> > John Rudolph
> > Amateur Radio Op N2YP
> > Unadilla,NY
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> 



From monty at ke7jvx.com  Fri Apr  6 23:15:04 2018
From: monty at ke7jvx.com (Monty)
Date: Fri, 6 Apr 2018 16:15:04 -0700
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
Message-ID: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>

Hello All,

I'm trying to install the allstarlink package on my Debian VPS.  I followed
the instructions on the wiki:

cd /tmp
wget https://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository
chmod +x install-repository
./install-repository

If Raspbian: apt-get install raspberrypi-kernel-headers -y

Otherwise: apt-get install linux-headers-`uname -r` -y

apt-get update
apt-get install allstarlink -y

I did get an error on the *linux-headers* command.  I installed what I
believe is the latest headers from apt-get (4.9.0-6-amd64).

Asterisk is not able to run, and I'm getting the following messages in the *CLI
*when I run asterisk manually:

[Apr  6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master: rpt_thread
restarted on node 28615
[Apr  6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open: Unable to
open '/dev/dahdi/pseudo': No such file or directory
[Apr  6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable to dup
channel: No such file or directory

Seems to be dahdi is missing.  Any ideas how to remedy?

I have tried to* recompile Dahdi *from:

http://wiki.allstarlink.org/wiki/DAHDI_Make

After running the "*make*" command I get the following:

"*You do not appear to have the sources for the 2.6.32-042stab127.2 kernel
installed.*"

I can't seem to find how to update/install *2.6.32-042stab127.2 kernel*.


Monty
KE7JVX
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/29342503/attachment.html>

From szingman at msgstor.com  Fri Apr  6 23:23:25 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Fri, 6 Apr 2018 19:23:25 -0400
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
In-Reply-To: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
Message-ID: <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>

What error did you get?

On 04/06/2018 07:15 PM, Monty wrote:
> Hello All,
>
> I'm trying to install the allstarlink package on my Debian VPS.? I 
> followed the instructions on the wiki:
>
> cd /tmp
> wgethttps://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository
> chmod +x install-repository
> ./install-repository
>
> If Raspbian: apt-get install raspberrypi-kernel-headers -y
>
> Otherwise: apt-get install linux-headers-`uname -r` -y
>
> apt-get update
> apt-get install allstarlink -y
> I did get an error on the *linux-headers* command. I installed what I 
> believe is the latest headers from apt-get (4.9.0-6-amd64).
>
> Asterisk is not able to run, and I'm getting the following messages in 
> the *CLI *when I run asterisk manually:
>
> [Apr? 6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master: 
> rpt_thread restarted on node 28615
> [Apr? 6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open: Unable 
> to open '/dev/dahdi/pseudo': No such file or directory
> [Apr? 6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable to 
> dup channel: No such file or directory
>
> Seems to be dahdi is missing.? Any ideas how to remedy?
>
> I have tried to*recompile Dahdi *from:
>
> http://wiki.allstarlink.org/wiki/DAHDI_Make
>
> After running the "*make*" command I get the following:
>
> "*You do not appear to have the sources for the 2.6.32-042stab127.2 
> kernel installed.*"
>
> I can't seem to find how to update/install *2.6.32-042stab127.2 kernel*.
>
>
> Monty
> KE7JVX
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/5b4ae497/attachment.html>

From petem001 at gmail.com  Fri Apr  6 23:45:22 2018
From: petem001 at gmail.com (Pierre Martel)
Date: Fri, 6 Apr 2018 19:45:22 -0400
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
In-Reply-To: <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
Message-ID: <CAL8dJwoJf39Xh4bh+TZPGA8gLTWknPSp8fEnOoZDhQvVThYTAA@mail.gmail.com>

a vps usely share the kernel between all the virtual machine. you probably
dont have the rights to add a kernel module like dadhi

2018-04-06 19:23 GMT-04:00 Steve Zingman <szingman at msgstor.com>:

> What error did you get?
>
>
> On 04/06/2018 07:15 PM, Monty wrote:
>
> Hello All,
>
> I'm trying to install the allstarlink package on my Debian VPS.  I
> followed the instructions on the wiki:
>
> cd /tmp
> wget https://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository
> chmod +x install-repository
> ./install-repository
>
> If Raspbian: apt-get install raspberrypi-kernel-headers -y
>
> Otherwise: apt-get install linux-headers-`uname -r` -y
>
> apt-get update
> apt-get install allstarlink -y
>
> I did get an error on the *linux-headers* command.  I installed what I
> believe is the latest headers from apt-get (4.9.0-6-amd64).
>
> Asterisk is not able to run, and I'm getting the following messages in the *CLI
> *when I run asterisk manually:
>
> [Apr  6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master: rpt_thread
> restarted on node 28615
> [Apr  6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open: Unable to
> open '/dev/dahdi/pseudo': No such file or directory
> [Apr  6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable to dup
> channel: No such file or directory
>
> Seems to be dahdi is missing.  Any ideas how to remedy?
>
> I have tried to* recompile Dahdi *from:
>
> http://wiki.allstarlink.org/wiki/DAHDI_Make
>
> After running the "*make*" command I get the following:
>
> "*You do not appear to have the sources for the 2.6.32-042stab127.2
> kernel installed.*"
>
> I can't seem to find how to update/install *2.6.32-042stab127.2 kernel*.
>
>
> Monty
> KE7JVX
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/6a057b58/attachment.html>

From kc8qch at gmail.com  Fri Apr  6 23:55:55 2018
From: kc8qch at gmail.com (Jeff Lehman)
Date: Fri, 6 Apr 2018 19:55:55 -0400
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
In-Reply-To: <CAL8dJwoJf39Xh4bh+TZPGA8gLTWknPSp8fEnOoZDhQvVThYTAA@mail.gmail.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAL8dJwoJf39Xh4bh+TZPGA8gLTWknPSp8fEnOoZDhQvVThYTAA@mail.gmail.com>
Message-ID: <4e35ca36-0fc2-5167-c3f5-d796f3d09f01@gmail.com>

If it is on digital ocean you should no issues. I Have a node up there 
on a vps and didn't have any issues installing it.


On 04/06/2018 07:45 PM, Pierre Martel wrote:
> a vps usely share the kernel between all the virtual machine. you 
> probably dont have the rights to add a kernel module like dadhi
>
> 2018-04-06 19:23 GMT-04:00 Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>>:
>
>     What error did you get?
>
>
>     On 04/06/2018 07:15 PM, Monty wrote:
>>     Hello All,
>>
>>     I'm trying to install the allstarlink package on my Debian VPS.?
>>     I followed the instructions on the wiki:
>>
>>     cd /tmp
>>     wgethttps://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository
>>     <https://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository>
>>     chmod +x install-repository
>>     ./install-repository
>>
>>     If Raspbian: apt-get install raspberrypi-kernel-headers -y
>>
>>     Otherwise: apt-get install linux-headers-`uname -r` -y
>>
>>     apt-get update
>>     apt-get install allstarlink -y
>>     I did get an error on the *linux-headers* command.? I installed
>>     what I believe is the latest headers from apt-get (4.9.0-6-amd64).
>>
>>     Asterisk is not able to run, and I'm getting the following
>>     messages in the *CLI *when I run asterisk manually:
>>
>>     [Apr 6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master:
>>     rpt_thread restarted on node 28615
>>     [Apr 6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open:
>>     Unable to open '/dev/dahdi/pseudo': No such file or directory
>>     [Apr 6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable
>>     to dup channel: No such file or directory
>>
>>     Seems to be dahdi is missing.? Any ideas how to remedy?
>>
>>     I have tried to*recompile Dahdi *from:
>>
>>     http://wiki.allstarlink.org/wiki/DAHDI_Make
>>     <http://wiki.allstarlink.org/wiki/DAHDI_Make>
>>
>>     After running the "*make*" command I get the following:
>>
>>     "*You do not appear to have the sources for the
>>     2.6.32-042stab127.2 kernel installed.*"
>>
>>     I can't seem to find how to update/install *2.6.32-042stab127.2
>>     kernel*.
>>
>>
>>     Monty
>>     KE7JVX
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at lists.allstarlink.org
>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>
>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/e53b6a3c/attachment.html>

From monty at ke7jvx.com  Sat Apr  7 00:05:45 2018
From: monty at ke7jvx.com (Monty)
Date: Fri, 6 Apr 2018 17:05:45 -0700
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
In-Reply-To: <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
Message-ID: <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>

Error from *make* command: "You do not appear to have the sources for the
2.6.32-042stab127.2 kernel installed" (Sorry I didn't highlight in the
initial email.)

I have tried this command, per the Readme of Dahdi: *make
KVERS=4.9.0-6-amd64*

I do not get any errors, then run:

*make install KVERS=4.9.0-6-amd64*

I get "DADHI installed successfully", reboot, and I still get the same
error messages in the CLI I listed below.



Monty

On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman at msgstor.com> wrote:

> What error did you get?
>
>
> On 04/06/2018 07:15 PM, Monty wrote:
>
> Hello All,
>
> I'm trying to install the allstarlink package on my Debian VPS.  I
> followed the instructions on the wiki:
>
> cd /tmp
> wget https://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository
> chmod +x install-repository
> ./install-repository
>
> If Raspbian: apt-get install raspberrypi-kernel-headers -y
>
> Otherwise: apt-get install linux-headers-`uname -r` -y
>
> apt-get update
> apt-get install allstarlink -y
>
> I did get an error on the *linux-headers* command.  I installed what I
> believe is the latest headers from apt-get (4.9.0-6-amd64).
>
> Asterisk is not able to run, and I'm getting the following messages in the *CLI
> *when I run asterisk manually:
>
> [Apr  6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master: rpt_thread
> restarted on node 28615
> [Apr  6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open: Unable to
> open '/dev/dahdi/pseudo': No such file or directory
> [Apr  6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable to dup
> channel: No such file or directory
>
> Seems to be dahdi is missing.  Any ideas how to remedy?
>
> I have tried to* recompile Dahdi *from:
>
> http://wiki.allstarlink.org/wiki/DAHDI_Make
>
> After running the "*make*" command I get the following:
>
> "*You do not appear to have the sources for the 2.6.32-042stab127.2
> kernel installed.*"
>
> I can't seem to find how to update/install *2.6.32-042stab127.2 kernel*.
>
>
> Monty
> KE7JVX
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/df670546/attachment.html>

From szingman at msgstor.com  Sat Apr  7 00:10:36 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Fri, 6 Apr 2018 20:10:36 -0400
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
In-Reply-To: <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
Message-ID: <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>

Without the proper kernel header, you can't build DAHDI.
What is the result of "apt-get install linux-headers-`uname -r` -y"

On 04/06/2018 08:05 PM, Monty wrote:
> Error from *make* command: "You do not appear to have the sources for 
> the 2.6.32-042stab127.2 kernel installed" (Sorry I didn't highlight in 
> the initial email.)
>
> I have tried this command, per the Readme of Dahdi: *make 
> KVERS=4.9.0-6-amd64*
> *
> *
> I do not get any errors, then run:
>
> *make install KVERS=4.9.0-6-amd64*
> *
> *
> I get "DADHI installed successfully", reboot, and I still get the same 
> error messages in the CLI I listed below.
> *
> *
>
>
> Monty
>
> On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     What error did you get?
>
>
>     On 04/06/2018 07:15 PM, Monty wrote:
>>     Hello All,
>>
>>     I'm trying to install the allstarlink package on my Debian VPS.?
>>     I followed the instructions on the wiki:
>>
>>     cd /tmp
>>     wgethttps://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository
>>     <https://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository>
>>     chmod +x install-repository
>>     ./install-repository
>>
>>     If Raspbian: apt-get install raspberrypi-kernel-headers -y
>>
>>     Otherwise: apt-get install linux-headers-`uname -r` -y
>>
>>     apt-get update
>>     apt-get install allstarlink -y
>>     I did get an error on the *linux-headers* command.? I installed
>>     what I believe is the latest headers from apt-get (4.9.0-6-amd64).
>>
>>     Asterisk is not able to run, and I'm getting the following
>>     messages in the *CLI *when I run asterisk manually:
>>
>>     [Apr 6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master:
>>     rpt_thread restarted on node 28615
>>     [Apr 6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open:
>>     Unable to open '/dev/dahdi/pseudo': No such file or directory
>>     [Apr 6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable
>>     to dup channel: No such file or directory
>>
>>     Seems to be dahdi is missing.? Any ideas how to remedy?
>>
>>     I have tried to*recompile Dahdi *from:
>>
>>     http://wiki.allstarlink.org/wiki/DAHDI_Make
>>     <http://wiki.allstarlink.org/wiki/DAHDI_Make>
>>
>>     After running the "*make*" command I get the following:
>>
>>     "*You do not appear to have the sources for the
>>     2.6.32-042stab127.2 kernel installed.*"
>>
>>     I can't seem to find how to update/install *2.6.32-042stab127.2
>>     kernel*.
>>
>>
>>     Monty
>>     KE7JVX
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at lists.allstarlink.org
>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>
>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/813d3679/attachment.html>

From thorn at myactv.net  Sat Apr  7 00:13:21 2018
From: thorn at myactv.net (Greg Thornwall)
Date: Fri, 6 Apr 2018 20:13:21 -0400
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
In-Reply-To: <CAL8dJwoJf39Xh4bh+TZPGA8gLTWknPSp8fEnOoZDhQvVThYTAA@mail.gmail.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAL8dJwoJf39Xh4bh+TZPGA8gLTWknPSp8fEnOoZDhQvVThYTAA@mail.gmail.com>
Message-ID: <b72f23d5-b36e-0e85-7ade-1056140544d5@myactv.net>


I had to go to a kvm version for my hub :

https://ipxcore.com/kvm-vps




On 04/06/2018 07:45 PM, Pierre Martel wrote:
> a vps usely share the kernel between all the virtual machine. you
> probably dont have the rights to add a kernel module like dadhi
>
> 2018-04-06 19:23 GMT-04:00 Steve Zingman <szingman at msgstor.com
> <mailto:szingman at msgstor.com>>:
>
>     What error did you get?
>
>
>     On 04/06/2018 07:15 PM, Monty wrote:
>>     Hello All,
>>
>>     I'm trying to install the allstarlink package on my Debian VPS.?
>>     I followed the instructions on the wiki:
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/af9e66c0/attachment.html>

From monty at ke7jvx.com  Sat Apr  7 00:22:20 2018
From: monty at ke7jvx.com (Monty)
Date: Fri, 6 Apr 2018 17:22:20 -0700
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
In-Reply-To: <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
Message-ID: <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>

Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package linux-headers-2.6.32-042stab127.2
E: Couldn't find any package by glob 'linux-headers-2.6.32-042stab127.2'
E: Couldn't find any package by regex 'linux-headers-2.6.32-042stab127.2'



Monty

On Fri, Apr 6, 2018 at 5:10 PM, Steve Zingman <szingman at msgstor.com> wrote:

> Without the proper kernel header, you can't build DAHDI.
> What is the result of "apt-get install linux-headers-`uname -r` -y"
>
>
> On 04/06/2018 08:05 PM, Monty wrote:
>
> Error from *make* command: "You do not appear to have the sources for the
> 2.6.32-042stab127.2 kernel installed" (Sorry I didn't highlight in the
> initial email.)
>
> I have tried this command, per the Readme of Dahdi: *make
> KVERS=4.9.0-6-amd64*
>
> I do not get any errors, then run:
>
> *make install KVERS=4.9.0-6-amd64*
>
> I get "DADHI installed successfully", reboot, and I still get the same
> error messages in the CLI I listed below.
>
>
>
> Monty
>
> On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> What error did you get?
>>
>>
>> On 04/06/2018 07:15 PM, Monty wrote:
>>
>> Hello All,
>>
>> I'm trying to install the allstarlink package on my Debian VPS.  I
>> followed the instructions on the wiki:
>>
>> cd /tmp
>> wget https://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository
>> chmod +x install-repository
>> ./install-repository
>>
>> If Raspbian: apt-get install raspberrypi-kernel-headers -y
>>
>> Otherwise: apt-get install linux-headers-`uname -r` -y
>>
>> apt-get update
>> apt-get install allstarlink -y
>>
>> I did get an error on the *linux-headers* command.  I installed what I
>> believe is the latest headers from apt-get (4.9.0-6-amd64).
>>
>> Asterisk is not able to run, and I'm getting the following messages in
>> the *CLI *when I run asterisk manually:
>>
>> [Apr  6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master: rpt_thread
>> restarted on node 28615
>> [Apr  6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open: Unable to
>> open '/dev/dahdi/pseudo': No such file or directory
>> [Apr  6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable to dup
>> channel: No such file or directory
>>
>> Seems to be dahdi is missing.  Any ideas how to remedy?
>>
>> I have tried to* recompile Dahdi *from:
>>
>> http://wiki.allstarlink.org/wiki/DAHDI_Make
>>
>> After running the "*make*" command I get the following:
>>
>> "*You do not appear to have the sources for the 2.6.32-042stab127.2
>> kernel installed.*"
>>
>> I can't seem to find how to update/install *2.6.32-042stab127.2 kernel*.
>>
>>
>> Monty
>> KE7JVX
>>
>>
>> _______________________________________________
>> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/fbe499f8/attachment.html>

From szingman at msgstor.com  Sat Apr  7 00:28:59 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Fri, 6 Apr 2018 20:28:59 -0400
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
In-Reply-To: <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
 <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
Message-ID: <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>

You are going to have to figure out how to get the proper kernel headers 
for your running kernel. One possibility to check is either run aptitude 
and check if you have any pending upgrades, and if so, is one of them a 
kernel upgrade. Pretty much the same thin by running apt-get 
dist-upgrade. Without the proper kernel headers, DAHDI will not build. 
You do not have to "make" it. once you have the proper kernel headers, 
you can reinstall dahdi with apt-get install --reinstall 
asl-dahdi-linux-dkms

On 04/06/2018 08:22 PM, Monty wrote:
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> E: Unable to locate package linux-headers-2.6.32-042stab127.2
> E: Couldn't find any package by glob 'linux-headers-2.6.32-042stab127.2'
> E: Couldn't find any package by regex 'linux-headers-2.6.32-042stab127.2'
>
>
>
> Monty
>
> On Fri, Apr 6, 2018 at 5:10 PM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     Without the proper kernel header, you can't build DAHDI.
>     What is the result of "apt-get install linux-headers-`uname -r` -y"
>
>
>     On 04/06/2018 08:05 PM, Monty wrote:
>>     Error from *make* command: "You do not appear to have the sources
>>     for the 2.6.32-042stab127.2 kernel installed" (Sorry I didn't
>>     highlight in the initial email.)
>>
>>     I have tried this command, per the Readme of Dahdi: *make
>>     KVERS=4.9.0-6-amd64*
>>     *
>>     *
>>     I do not get any errors, then run:
>>
>>     *make install KVERS=4.9.0-6-amd64*
>>     *
>>     *
>>     I get "DADHI installed successfully", reboot, and I still get the
>>     same error messages in the CLI I listed below.
>>     *
>>     *
>>
>>
>>     Monty
>>
>>     On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman
>>     <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>
>>         What error did you get?
>>
>>
>>         On 04/06/2018 07:15 PM, Monty wrote:
>>>         Hello All,
>>>
>>>         I'm trying to install the allstarlink package on my Debian
>>>         VPS.? I followed the instructions on the wiki:
>>>
>>>         cd /tmp
>>>         wgethttps://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository
>>>         <https://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/install-repository>
>>>         chmod +x install-repository
>>>         ./install-repository
>>>
>>>         If Raspbian: apt-get install raspberrypi-kernel-headers -y
>>>
>>>         Otherwise: apt-get install linux-headers-`uname -r` -y
>>>
>>>         apt-get update
>>>         apt-get install allstarlink -y
>>>         I did get an error on the *linux-headers* command.? I
>>>         installed what I believe is the latest headers from apt-get
>>>         (4.9.0-6-amd64).
>>>
>>>         Asterisk is not able to run, and I'm getting the following
>>>         messages in the *CLI *when I run asterisk manually:
>>>
>>>         [Apr 6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master:
>>>         rpt_thread restarted on node 28615
>>>         [Apr 6 16:05:35] WARNING[15001]: chan_dahdi.c:928
>>>         dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file
>>>         or directory
>>>         [Apr 6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup:
>>>         Unable to dup channel: No such file or directory
>>>
>>>         Seems to be dahdi is missing.? Any ideas how to remedy?
>>>
>>>         I have tried to*recompile Dahdi *from:
>>>
>>>         http://wiki.allstarlink.org/wiki/DAHDI_Make
>>>         <http://wiki.allstarlink.org/wiki/DAHDI_Make>
>>>
>>>         After running the "*make*" command I get the following:
>>>
>>>         "*You do not appear to have the sources for the
>>>         2.6.32-042stab127.2 kernel installed.*"
>>>
>>>         I can't seem to find how to update/install
>>>         *2.6.32-042stab127.2 kernel*.
>>>
>>>
>>>         Monty
>>>         KE7JVX
>>>
>>>
>>>         _______________________________________________
>>>         App_rpt-users mailing list
>>>         App_rpt-users at lists.allstarlink.org
>>>         <mailto:App_rpt-users at lists.allstarlink.org>
>>>         http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>         <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>
>>>         To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>         <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>         You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>>         _______________________________________________
>>         App_rpt-users mailing list
>>         App_rpt-users at lists.allstarlink.org
>>         <mailto:App_rpt-users at lists.allstarlink.org>
>>         http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>         <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>
>>         To unsubscribe from this list please visit
>>         http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>         <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>         and scroll down to the bottom of the page. Enter your email
>>         address and press the "Unsubscribe or edit options button"
>>         You do not need a password to unsubscribe, you can do it via
>>         email confirmation. If you have trouble unsubscribing, please
>>         send a message to the list detailing the problem.
>>
>>
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at lists.allstarlink.org
>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>
>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180406/c696bf89/attachment.html>

From andy_kb7b at yahoo.com  Sat Apr  7 08:18:47 2018
From: andy_kb7b at yahoo.com (Andy KB7B)
Date: Sat, 7 Apr 2018 08:18:47 +0000 (UTC)
Subject: [App_rpt-users] Install Allstarlink on Debian 9 VPS
In-Reply-To: <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
 <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
 <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
Message-ID: <187630174.115689.1523089127279@mail.yahoo.com>

Monty,
Try typing "uname -r" to determine your kernel version and then search for it with google.For me I Googled "debian 2.6.32-042stab127.2 kernel headers" which took me to the openvz website where I was able to download the .deb file.

-Andy, KB7B42432


      From: Steve Zingman <szingman at msgstor.com>
 To: app_rpt-users at lists.allstarlink.org 
 Sent: Saturday, April 7, 2018 2:38 AM
 Subject: Re: [App_rpt-users] Install Allstarlink on Debian 9 VPS
   
 You are going to have to figure out how to get the proper kernel headers for your running kernel. One possibility to check is either run aptitude and check if you have any pending upgrades, and if so, is one of them a kernel upgrade. Pretty much the same thin by running apt-get dist-upgrade. Without the proper kernel headers, DAHDI will not build. You do not have to "make" it. once you have the proper kernel headers, you can reinstall dahdi with apt-get install --reinstall asl-dahdi-linux-dkms
 
 On 04/06/2018 08:22 PM, Monty wrote:
  
  Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-headers-2.6.32-042stab127.2 E: Couldn't find any package by glob 'linux-headers-2.6.32-042stab127.2' E: Couldn't find any package by regex 'linux-headers-2.6.32-042stab127.2' 
   
  
 Monty  
 On Fri, Apr 6, 2018 at 5:10 PM, Steve Zingman <szingman at msgstor.com> wrote:
 
  Without the proper kernel header, you can't build DAHDI. 
 What is the result of "apt-get install linux-headers-`uname -r` -y"  
 
 On 04/06/2018 08:05 PM, Monty wrote:
  
 Error from make command: "You do not appear to have the sources for the 2.6.32-042stab127.2 kernel installed" (Sorry I didn't highlight in the initial email.)
 
  I have tried this command, per the Readme of Dahdi: make KVERS=4.9.0-6-amd64 
  I do not get any errors, then run: 
  make install KVERS=4.9.0-6-amd64 
  I get "DADHI installed successfully", reboot, and I still get the same error messages in the CLI I listed below. 
   
  
 Monty  
 On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman at msgstor.com> wrote:
 
  What error did you get?  
 
 On 04/06/2018 07:15 PM, Monty wrote:
    
   Hello All, 
  I'm trying to install the allstarlink package on my Debian VPS.? I followed the instructions on the wiki: 
   cd /tmp
wget https://github.com/AllStarLink /Asterisk/raw/develop/allstar/ repository/install-repository
chmod +x install-repository
./install-repository

If Raspbian: apt-get install raspberrypi-kernel-headers -y

Otherwise: apt-get install linux-headers-`uname -r` -y

apt-get update
apt-get install allstarlink -y I did get an error on the linux-headers command.? I installed what I believe is the latest headers from apt-get (4.9.0-6-amd64). 
  Asterisk is not able to run, and I'm getting the following messages in the CLI when I run asterisk manually: 
   [Apr? 6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 28615 [Apr? 6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Apr? 6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory 
  Seems to be dahdi is missing.? Any ideas how to remedy? 
  I have tried to recompile Dahdi from: 
  http://wiki.allstarlink.org/wi ki/DAHDI_Make
  
  After running the "make" command I get the following: 
   "You do not appear to have the sources for the 2.6.32-042stab127.2 kernel installed."  
  I can't seem to find how to update/install?2.6.32-042stab1 27.2 kernel. 
  
    Monty  KE7JVX    
  
   ______________________________ _________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlin k.org
http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users

To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.  
 
  
 ______________________________ _________________
 App_rpt-users mailing list
 App_rpt-users at lists.allstarlin k.org
 http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users
 
 To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rp t-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
 You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
 
  
  
  
 ______________________________ _________________
App_rpt-users mailing list
App_rpt-users at lists. allstarlink.org
http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_ rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_ rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.  
 
    
 ______________________________ _________________
 App_rpt-users mailing list
 App_rpt-users at lists. allstarlink.org
 http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_ rpt-users
 
 To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_ rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
 You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
 
  
  
  
 _______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.  
 
 _______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180407/8d3c2c5a/attachment.html>

From Benjamin at Project23D.com  Sat Apr  7 17:27:38 2018
From: Benjamin at Project23D.com (Benjamin Naber)
Date: Sat, 07 Apr 2018 12:27:38 -0500
Subject: [App_rpt-users] ASL on a VPS/hosted/cloud server
In-Reply-To: <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
 <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
 <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
Message-ID: <1523122058.982.3.camel@Project23D.com>

Forgive the nativity, but what is the point of ASL nodes being hosted
on a VPS?

For a hub node I understand, and do so myself. However, there is a
growing number of hub nodes that do not do anything.

I understand a public hosted hub node is great for connecting to with
the web transceiver and phone portal, but I sure hope this is not going
to become the norm.

We have a few guys that come onto our system that only use their phone,
and honestly, I wish they would use a radio instead. For the principle
of the matter, but also, phones have terrible audio and tend to pick up
noise that needs not broadcasting.

~Benjamin, KB9LFZ


On Fri, 2018-04-06 at 20:28 -0400, Steve Zingman wrote:
> You are going to have to figure out how to get the proper kernel
> headers for your running kernel. One possibility to check is either
> run aptitude and check if you have any pending upgrades, and if so,
> is one of them a kernel upgrade. Pretty much the same thin by running
> apt-get dist-upgrade. Without the proper kernel headers, DAHDI will
> not build. You do not have to "make" it. once you have the proper
> kernel headers, you can reinstall dahdi with apt-get install --
> reinstall asl-dahdi-linux-dkms
> 
> On 04/06/2018 08:22 PM, Monty wrote:
> > Reading package lists... Done
> > Building dependency tree
> > Reading state information... Done
> > E: Unable to locate package linux-headers-2.6.32-042stab127.2
> > E: Couldn't find any package by glob 'linux-headers-2.6.32-
> > 042stab127.2'
> > E: Couldn't find any package by regex 'linux-headers-2.6.32-
> > 042stab127.2'
> > 
> > 
> > 
> > Monty
> > 
> > On Fri, Apr 6, 2018 at 5:10 PM, Steve Zingman <szingman at msgstor.com
> > > wrote:
> > > Without the proper kernel header, you can't build DAHDI.?
> > > What is the result of "apt-get install linux-headers-`uname -r`
> > > -y"
> > > 
> > > 
> > > On 04/06/2018 08:05 PM, Monty wrote:
> > > > Error from make command: "You do not appear to have the sources
> > > > for the 2.6.32-042stab127.2 kernel installed" (Sorry I didn't
> > > > highlight in the initial email.)
> > > > 
> > > > I have tried this command, per the Readme of Dahdi: make
> > > > KVERS=4.9.0-6-amd64
> > > > 
> > > > I do not get any errors, then run:
> > > > 
> > > > make install KVERS=4.9.0-6-amd64
> > > > 
> > > > I get "DADHI installed successfully", reboot, and I still get
> > > > the same error messages in the CLI I listed below.
> > > > 
> > > > 
> > > > 
> > > > Monty
> > > > 
> > > > On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman at msgstor
> > > > .com> wrote:
> > > > > What error did you get?
> > > > > 
> > > > > 
> > > > > On 04/06/2018 07:15 PM, Monty wrote:
> > > > > > Hello All,
> > > > > > 
> > > > > > I'm trying to install the allstarlink package on my Debian
> > > > > > VPS.? I followed the instructions on the wiki:
> > > > > > 
> > > > > > cd /tmp
> > > > > > wget https://github.com/AllStarLink/Asterisk/raw/develop/al
> > > > > > lstar/repository/install-repository
> > > > > > chmod +x install-repository
> > > > > > ./install-repository
> > > > > > 
> > > > > > If Raspbian: apt-get install raspberrypi-kernel-headers -y
> > > > > > 
> > > > > > Otherwise: apt-get install linux-headers-`uname -r` -y
> > > > > > 
> > > > > > apt-get update
> > > > > > apt-get install allstarlink -y
> > > > > > I did get an error on the linux-headers command.? I
> > > > > > installed what I believe is the latest headers from apt-get 
> > > > > > (4.9.0-6-amd64).
> > > > > > 
> > > > > > Asterisk is not able to run, and I'm getting the following
> > > > > > messages in the CLI when I run asterisk manually:
> > > > > > 
> > > > > > [Apr? 6 16:05:35] WARNING[14976]: app_rpt.c:22240
> > > > > > rpt_master: rpt_thread restarted on node 28615
> > > > > > [Apr? 6 16:05:35] WARNING[15001]: chan_dahdi.c:928
> > > > > > dahdi_open: Unable to open '/dev/dahdi/pseudo': No such
> > > > > > file or directory
> > > > > > [Apr? 6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup:
> > > > > > Unable to dup channel: No such file or directory
> > > > > > 
> > > > > > Seems to be dahdi is missing.? Any ideas how to remedy?
> > > > > > 
> > > > > > I have tried to recompile Dahdi from:
> > > > > > 
> > > > > > http://wiki.allstarlink.org/wiki/DAHDI_Make
> > > > > > 
> > > > > > After running the "make" command I get the following:
> > > > > > 
> > > > > > "You do not appear to have the sources for the 2.6.32-
> > > > > > 042stab127.2 kernel installed."
> > > > > > 
> > > > > > I can't seem to find how to update/install?2.6.32-
> > > > > > 042stab127.2 kernel.
> > > > > > 
> > > > > > 
> > > > > > Monty
> > > > > > KE7JVX
> > > > > > 
> > > > > > 
> > > > > > _______________________________________________
> > > > > > App_rpt-users mailing list
> > > > > > App_rpt-users at lists.allstarlink.org
> > > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_r
> > > > > > pt-users
> > > > > > 
> > > > > > To unsubscribe from this list please visit http://lists.all
> > > > > > starlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> > > > > > scroll down to the bottom of the page. Enter your email
> > > > > > address and press the "Unsubscribe or edit options button"
> > > > > > You do not need a password to unsubscribe, you can do it
> > > > > > via email confirmation. If you have trouble unsubscribing,
> > > > > > please send a message to the list detailing the problem.?
> > > > > ?
> > > > > 
> > > > > _______________________________________________
> > > > > App_rpt-users mailing list
> > > > > App_rpt-users at lists.allstarlink.org
> > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt
> > > > > -users
> > > > > 
> > > > > To unsubscribe from this list please visit http://lists.allst
> > > > > arlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> > > > > down to the bottom of the page. Enter your email address and
> > > > > press the "Unsubscribe or edit options button"
> > > > > You do not need a password to unsubscribe, you can do it via
> > > > > email confirmation. If you have trouble unsubscribing, please
> > > > > send a message to the list detailing the problem.?
> > > > > 
> > > > 
> > > > 
> > > > 
> > > > _______________________________________________
> > > > App_rpt-users mailing list
> > > > App_rpt-users at lists.allstarlink.org
> > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-u
> > > > sers
> > > > 
> > > > To unsubscribe from this list please visit http://lists.allstar
> > > > link.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > > > to the bottom of the page. Enter your email address and press
> > > > the "Unsubscribe or edit options button"
> > > > You do not need a password to unsubscribe, you can do it via
> > > > email confirmation. If you have trouble unsubscribing, please
> > > > send a message to the list detailing the problem.?
> > > ?
> > > 
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at lists.allstarlink.org
> > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-use
> > > rs
> > > 
> > > To unsubscribe from this list please visit http://lists.allstarli
> > > nk.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> > > the bottom of the page. Enter your email address and press the
> > > "Unsubscribe or edit options button"
> > > You do not need a password to unsubscribe, you can do it via
> > > email confirmation. If you have trouble unsubscribing, please
> > > send a message to the list detailing the problem.?
> > > 
> > 
> > 
> > 
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > 
> > To unsubscribe from this list please visit http://lists.allstarlink
> > .org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> > bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a
> > message to the list detailing the problem.?
> ?
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.o
> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a
> message to the list detailing the problem.?


From monty at ke7jvx.com  Sat Apr  7 18:11:09 2018
From: monty at ke7jvx.com (Monty)
Date: Sat, 07 Apr 2018 18:11:09 +0000
Subject: [App_rpt-users] ASL on a VPS/hosted/cloud server
In-Reply-To: <1523122058.982.3.camel@Project23D.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
 <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
 <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
 <1523122058.982.3.camel@Project23D.com>
Message-ID: <CAN3ondsEdm3gxVZ8QLiSaqQrynpD8Ru5y19dzSSi2uYWanFwfA@mail.gmail.com>

For my situation, I?m looking at a VPS to be a hub possibility, and at $1 a
month I can?t pass up the opportunity to experiment. All of our connections
are RF.  We limited then killed echolink years ago for the reasons you
mentioned.

Another couple of reasons for putting a hub in a data center is 1 gigabit
connection, low latency (excellent for voice traffic), and redundant
Ethernet paths, power, cooling, etc.

On Sat, Apr 7, 2018 at 10:27 AM Benjamin Naber <Benjamin at project23d.com>
wrote:

> Forgive the nativity, but what is the point of ASL nodes being hosted
> on a VPS?
>
> For a hub node I understand, and do so myself. However, there is a
> growing number of hub nodes that do not do anything.
>
> I understand a public hosted hub node is great for connecting to with
> the web transceiver and phone portal, but I sure hope this is not going
> to become the norm.
>
> We have a few guys that come onto our system that only use their phone,
> and honestly, I wish they would use a radio instead. For the principle
> of the matter, but also, phones have terrible audio and tend to pick up
> noise that needs not broadcasting.
>
> ~Benjamin, KB9LFZ
>
>
> On Fri, 2018-04-06 at 20:28 -0400, Steve Zingman wrote:
> > You are going to have to figure out how to get the proper kernel
> > headers for your running kernel. One possibility to check is either
> > run aptitude and check if you have any pending upgrades, and if so,
> > is one of them a kernel upgrade. Pretty much the same thin by running
> > apt-get dist-upgrade. Without the proper kernel headers, DAHDI will
> > not build. You do not have to "make" it. once you have the proper
> > kernel headers, you can reinstall dahdi with apt-get install --
> > reinstall asl-dahdi-linux-dkms
> >
> > On 04/06/2018 08:22 PM, Monty wrote:
> > > Reading package lists... Done
> > > Building dependency tree
> > > Reading state information... Done
> > > E: Unable to locate package linux-headers-2.6.32-042stab127.2
> > > E: Couldn't find any package by glob 'linux-headers-2.6.32-
> > > 042stab127.2'
> > > E: Couldn't find any package by regex 'linux-headers-2.6.32-
> > > 042stab127.2'
> > >
> > >
> > >
> > > Monty
> > >
> > > On Fri, Apr 6, 2018 at 5:10 PM, Steve Zingman <szingman at msgstor.com
> > > > wrote:
> > > > Without the proper kernel header, you can't build DAHDI.
> > > > What is the result of "apt-get install linux-headers-`uname -r`
> > > > -y"
> > > >
> > > >
> > > > On 04/06/2018 08:05 PM, Monty wrote:
> > > > > Error from make command: "You do not appear to have the sources
> > > > > for the 2.6.32-042stab127.2 kernel installed" (Sorry I didn't
> > > > > highlight in the initial email.)
> > > > >
> > > > > I have tried this command, per the Readme of Dahdi: make
> > > > > KVERS=4.9.0-6-amd64
> > > > >
> > > > > I do not get any errors, then run:
> > > > >
> > > > > make install KVERS=4.9.0-6-amd64
> > > > >
> > > > > I get "DADHI installed successfully", reboot, and I still get
> > > > > the same error messages in the CLI I listed below.
> > > > >
> > > > >
> > > > >
> > > > > Monty
> > > > >
> > > > > On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman at msgstor
> > > > > .com> wrote:
> > > > > > What error did you get?
> > > > > >
> > > > > >
> > > > > > On 04/06/2018 07:15 PM, Monty wrote:
> > > > > > > Hello All,
> > > > > > >
> > > > > > > I'm trying to install the allstarlink package on my Debian
> > > > > > > VPS.  I followed the instructions on the wiki:
> > > > > > >
> > > > > > > cd /tmp
> > > > > > > wget https://github.com/AllStarLink/Asterisk/raw/develop/al
> > > > > > > lstar/repository/install-repository
> > > > > > > chmod +x install-repository
> > > > > > > ./install-repository
> > > > > > >
> > > > > > > If Raspbian: apt-get install raspberrypi-kernel-headers -y
> > > > > > >
> > > > > > > Otherwise: apt-get install linux-headers-`uname -r` -y
> > > > > > >
> > > > > > > apt-get update
> > > > > > > apt-get install allstarlink -y
> > > > > > > I did get an error on the linux-headers command.  I
> > > > > > > installed what I believe is the latest headers from apt-get
> > > > > > > (4.9.0-6-amd64).
> > > > > > >
> > > > > > > Asterisk is not able to run, and I'm getting the following
> > > > > > > messages in the CLI when I run asterisk manually:
> > > > > > >
> > > > > > > [Apr  6 16:05:35] WARNING[14976]: app_rpt.c:22240
> > > > > > > rpt_master: rpt_thread restarted on node 28615
> > > > > > > [Apr  6 16:05:35] WARNING[15001]: chan_dahdi.c:928
> > > > > > > dahdi_open: Unable to open '/dev/dahdi/pseudo': No such
> > > > > > > file or directory
> > > > > > > [Apr  6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup:
> > > > > > > Unable to dup channel: No such file or directory
> > > > > > >
> > > > > > > Seems to be dahdi is missing.  Any ideas how to remedy?
> > > > > > >
> > > > > > > I have tried to recompile Dahdi from:
> > > > > > >
> > > > > > > http://wiki.allstarlink.org/wiki/DAHDI_Make
> > > > > > >
> > > > > > > After running the "make" command I get the following:
> > > > > > >
> > > > > > > "You do not appear to have the sources for the 2.6.32-
> > > > > > > 042stab127.2 kernel installed."
> > > > > > >
> > > > > > > I can't seem to find how to update/install 2.6.32-
> > > > > > > 042stab127.2 kernel.
> > > > > > >
> > > > > > >
> > > > > > > Monty
> > > > > > > KE7JVX
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > App_rpt-users mailing list
> > > > > > > App_rpt-users at lists.allstarlink.org
> > > > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_r
> > > > > > > pt-users
> > > > > > >
> > > > > > > To unsubscribe from this list please visit http://lists.all
> > > > > > > starlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> > > > > > > scroll down to the bottom of the page. Enter your email
> > > > > > > address and press the "Unsubscribe or edit options button"
> > > > > > > You do not need a password to unsubscribe, you can do it
> > > > > > > via email confirmation. If you have trouble unsubscribing,
> > > > > > > please send a message to the list detailing the problem.
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > App_rpt-users mailing list
> > > > > > App_rpt-users at lists.allstarlink.org
> > > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt
> > > > > > -users
> > > > > >
> > > > > > To unsubscribe from this list please visit http://lists.allst
> > > > > > arlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> > > > > > down to the bottom of the page. Enter your email address and
> > > > > > press the "Unsubscribe or edit options button"
> > > > > > You do not need a password to unsubscribe, you can do it via
> > > > > > email confirmation. If you have trouble unsubscribing, please
> > > > > > send a message to the list detailing the problem.
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > App_rpt-users mailing list
> > > > > App_rpt-users at lists.allstarlink.org
> > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-u
> > > > > sers
> > > > >
> > > > > To unsubscribe from this list please visit http://lists.allstar
> > > > > link.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > > > > to the bottom of the page. Enter your email address and press
> > > > > the "Unsubscribe or edit options button"
> > > > > You do not need a password to unsubscribe, you can do it via
> > > > > email confirmation. If you have trouble unsubscribing, please
> > > > > send a message to the list detailing the problem.
> > > >
> > > >
> > > > _______________________________________________
> > > > App_rpt-users mailing list
> > > > App_rpt-users at lists.allstarlink.org
> > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-use
> > > > rs
> > > >
> > > > To unsubscribe from this list please visit http://lists.allstarli
> > > > nk.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> > > > the bottom of the page. Enter your email address and press the
> > > > "Unsubscribe or edit options button"
> > > > You do not need a password to unsubscribe, you can do it via
> > > > email confirmation. If you have trouble unsubscribing, please
> > > > send a message to the list detailing the problem.
> > > >
> > >
> > >
> > >
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at lists.allstarlink.org
> > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit http://lists.allstarlink
> > > .org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> > > bottom of the page. Enter your email address and press the
> > > "Unsubscribe or edit options button"
> > > You do not need a password to unsubscribe, you can do it via email
> > > confirmation. If you have trouble unsubscribing, please send a
> > > message to the list detailing the problem.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.o
> > rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> > bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a
> > message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.

-- 

Monty
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180407/058e2c3f/attachment.html>

From kc8qch at gmail.com  Sat Apr  7 19:52:57 2018
From: kc8qch at gmail.com (Jeff Lehman)
Date: Sat, 7 Apr 2018 15:52:57 -0400
Subject: [App_rpt-users] ASL on a VPS/hosted/cloud server
In-Reply-To: <1523122058.982.3.camel@Project23D.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
 <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
 <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
 <1523122058.982.3.camel@Project23D.com>
Message-ID: <CADhShUDzVcGi7MJS+ubz4GQ-2bxtiX5gLZiL0TxjJqa0fYKc8A@mail.gmail.com>

That's exactly the reason the club I am with uses a VPS to host our one
node. We are a global club and spread out all over the world. We host a hub
on the VPS so that members can connect to it and talk all around. We have
no need to hook it to a radio.

On Sat, Apr 7, 2018 at 1:27 PM, Benjamin Naber <Benjamin at project23d.com>
wrote:

> Forgive the nativity, but what is the point of ASL nodes being hosted
> on a VPS?
>
> For a hub node I understand, and do so myself. However, there is a
> growing number of hub nodes that do not do anything.
>
> I understand a public hosted hub node is great for connecting to with
> the web transceiver and phone portal, but I sure hope this is not going
> to become the norm.
>
> We have a few guys that come onto our system that only use their phone,
> and honestly, I wish they would use a radio instead. For the principle
> of the matter, but also, phones have terrible audio and tend to pick up
> noise that needs not broadcasting.
>
> ~Benjamin, KB9LFZ
>
>
> On Fri, 2018-04-06 at 20:28 -0400, Steve Zingman wrote:
> > You are going to have to figure out how to get the proper kernel
> > headers for your running kernel. One possibility to check is either
> > run aptitude and check if you have any pending upgrades, and if so,
> > is one of them a kernel upgrade. Pretty much the same thin by running
> > apt-get dist-upgrade. Without the proper kernel headers, DAHDI will
> > not build. You do not have to "make" it. once you have the proper
> > kernel headers, you can reinstall dahdi with apt-get install --
> > reinstall asl-dahdi-linux-dkms
> >
> > On 04/06/2018 08:22 PM, Monty wrote:
> > > Reading package lists... Done
> > > Building dependency tree
> > > Reading state information... Done
> > > E: Unable to locate package linux-headers-2.6.32-042stab127.2
> > > E: Couldn't find any package by glob 'linux-headers-2.6.32-
> > > 042stab127.2'
> > > E: Couldn't find any package by regex 'linux-headers-2.6.32-
> > > 042stab127.2'
> > >
> > >
> > >
> > > Monty
> > >
> > > On Fri, Apr 6, 2018 at 5:10 PM, Steve Zingman <szingman at msgstor.com
> > > > wrote:
> > > > Without the proper kernel header, you can't build DAHDI.
> > > > What is the result of "apt-get install linux-headers-`uname -r`
> > > > -y"
> > > >
> > > >
> > > > On 04/06/2018 08:05 PM, Monty wrote:
> > > > > Error from make command: "You do not appear to have the sources
> > > > > for the 2.6.32-042stab127.2 kernel installed" (Sorry I didn't
> > > > > highlight in the initial email.)
> > > > >
> > > > > I have tried this command, per the Readme of Dahdi: make
> > > > > KVERS=4.9.0-6-amd64
> > > > >
> > > > > I do not get any errors, then run:
> > > > >
> > > > > make install KVERS=4.9.0-6-amd64
> > > > >
> > > > > I get "DADHI installed successfully", reboot, and I still get
> > > > > the same error messages in the CLI I listed below.
> > > > >
> > > > >
> > > > >
> > > > > Monty
> > > > >
> > > > > On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman at msgstor
> > > > > .com> wrote:
> > > > > > What error did you get?
> > > > > >
> > > > > >
> > > > > > On 04/06/2018 07:15 PM, Monty wrote:
> > > > > > > Hello All,
> > > > > > >
> > > > > > > I'm trying to install the allstarlink package on my Debian
> > > > > > > VPS.  I followed the instructions on the wiki:
> > > > > > >
> > > > > > > cd /tmp
> > > > > > > wget https://github.com/AllStarLink/Asterisk/raw/develop/al
> > > > > > > lstar/repository/install-repository
> > > > > > > chmod +x install-repository
> > > > > > > ./install-repository
> > > > > > >
> > > > > > > If Raspbian: apt-get install raspberrypi-kernel-headers -y
> > > > > > >
> > > > > > > Otherwise: apt-get install linux-headers-`uname -r` -y
> > > > > > >
> > > > > > > apt-get update
> > > > > > > apt-get install allstarlink -y
> > > > > > > I did get an error on the linux-headers command.  I
> > > > > > > installed what I believe is the latest headers from apt-get
> > > > > > > (4.9.0-6-amd64).
> > > > > > >
> > > > > > > Asterisk is not able to run, and I'm getting the following
> > > > > > > messages in the CLI when I run asterisk manually:
> > > > > > >
> > > > > > > [Apr  6 16:05:35] WARNING[14976]: app_rpt.c:22240
> > > > > > > rpt_master: rpt_thread restarted on node 28615
> > > > > > > [Apr  6 16:05:35] WARNING[15001]: chan_dahdi.c:928
> > > > > > > dahdi_open: Unable to open '/dev/dahdi/pseudo': No such
> > > > > > > file or directory
> > > > > > > [Apr  6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup:
> > > > > > > Unable to dup channel: No such file or directory
> > > > > > >
> > > > > > > Seems to be dahdi is missing.  Any ideas how to remedy?
> > > > > > >
> > > > > > > I have tried to recompile Dahdi from:
> > > > > > >
> > > > > > > http://wiki.allstarlink.org/wiki/DAHDI_Make
> > > > > > >
> > > > > > > After running the "make" command I get the following:
> > > > > > >
> > > > > > > "You do not appear to have the sources for the 2.6.32-
> > > > > > > 042stab127.2 kernel installed."
> > > > > > >
> > > > > > > I can't seem to find how to update/install 2.6.32-
> > > > > > > 042stab127.2 kernel.
> > > > > > >
> > > > > > >
> > > > > > > Monty
> > > > > > > KE7JVX
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > App_rpt-users mailing list
> > > > > > > App_rpt-users at lists.allstarlink.org
> > > > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_r
> > > > > > > pt-users
> > > > > > >
> > > > > > > To unsubscribe from this list please visit http://lists.all
> > > > > > > starlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> > > > > > > scroll down to the bottom of the page. Enter your email
> > > > > > > address and press the "Unsubscribe or edit options button"
> > > > > > > You do not need a password to unsubscribe, you can do it
> > > > > > > via email confirmation. If you have trouble unsubscribing,
> > > > > > > please send a message to the list detailing the problem.
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > App_rpt-users mailing list
> > > > > > App_rpt-users at lists.allstarlink.org
> > > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt
> > > > > > -users
> > > > > >
> > > > > > To unsubscribe from this list please visit http://lists.allst
> > > > > > arlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> > > > > > down to the bottom of the page. Enter your email address and
> > > > > > press the "Unsubscribe or edit options button"
> > > > > > You do not need a password to unsubscribe, you can do it via
> > > > > > email confirmation. If you have trouble unsubscribing, please
> > > > > > send a message to the list detailing the problem.
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > App_rpt-users mailing list
> > > > > App_rpt-users at lists.allstarlink.org
> > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-u
> > > > > sers
> > > > >
> > > > > To unsubscribe from this list please visit http://lists.allstar
> > > > > link.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > > > > to the bottom of the page. Enter your email address and press
> > > > > the "Unsubscribe or edit options button"
> > > > > You do not need a password to unsubscribe, you can do it via
> > > > > email confirmation. If you have trouble unsubscribing, please
> > > > > send a message to the list detailing the problem.
> > > >
> > > >
> > > > _______________________________________________
> > > > App_rpt-users mailing list
> > > > App_rpt-users at lists.allstarlink.org
> > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-use
> > > > rs
> > > >
> > > > To unsubscribe from this list please visit http://lists.allstarli
> > > > nk.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> > > > the bottom of the page. Enter your email address and press the
> > > > "Unsubscribe or edit options button"
> > > > You do not need a password to unsubscribe, you can do it via
> > > > email confirmation. If you have trouble unsubscribing, please
> > > > send a message to the list detailing the problem.
> > > >
> > >
> > >
> > >
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at lists.allstarlink.org
> > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit http://lists.allstarlink
> > > .org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> > > bottom of the page. Enter your email address and press the
> > > "Unsubscribe or edit options button"
> > > You do not need a password to unsubscribe, you can do it via email
> > > confirmation. If you have trouble unsubscribing, please send a
> > > message to the list detailing the problem.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.o
> > rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> > bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a
> > message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180407/8b91822b/attachment.html>

From cbenn7 at verizon.net  Mon Apr  9 22:55:41 2018
From: cbenn7 at verizon.net (CHARLES BENN)
Date: Mon, 9 Apr 2018 22:55:41 +0000 (UTC)
Subject: [App_rpt-users] Static IP Config
References: <1636031102.983789.1523314541892.ref@mail.yahoo.com>
Message-ID: <1636031102.983789.1523314541892@mail.yahoo.com>

I loaded the new image and did the original set up with DHCP.I log on to the Console using root enter the info using the? ASL-Menu and save it but the IP remains DHCP.After hitting OK there is a quick flash of some info at the bottom of the screen but its is gone before I can read it.
Any suggestions73 Charlie WB2SNN 27904-27908

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180409/bb0d637a/attachment.html>

From loren at lorentedford.com  Tue Apr 10 00:12:32 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Mon, 9 Apr 2018 19:12:32 -0500
Subject: [App_rpt-users] Static IP Config
In-Reply-To: <1636031102.983789.1523314541892@mail.yahoo.com>
References: <1636031102.983789.1523314541892.ref@mail.yahoo.com>
 <1636031102.983789.1523314541892@mail.yahoo.com>
Message-ID: <20180410001231.5C8881E26EC@morty.keekles.org>

Via ssh command line
nano /etc/network/interfaces

### Put the following in
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
 auto lo
 iface lo inet loopback

# The primary network interface
 auto eth0
 allow-hotplug eth0
 iface eth0 inet static
  address ipaddr
  netmask 255.255.255.255
  broadcast ipaddr
  gateway 192.168.1.1
  dns-nameservers 8.8.8.8
## Just to be sure gateway is working correctly add the below
  post-up /sbin/ip route add Gatewayip  dev eth0
  post-up /sbin/ip route add default via Gatewayip
  pre-down /sbin/ip route delete Gatewayip dev eth0
  pre-down /sbin/ip route delete default via Gatewayip

## End of /etc/network/interfaces

I hope the above helps you in setting your static ip on your system..

Good luck if you need anything just holler!





Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: CHARLES BENN
Sent: Monday, April 9, 2018 5:56 PM
To: app_rpt-users at lists.allstarlink.org
Subject: [App_rpt-users] Static IP Config

I loaded the new image and did the original set up with DHCP.
I log on to the Console using root enter the info using the? ASL-Menu and save it but the IP remains DHCP.
After hitting OK there is a quick flash of some info at the bottom of the screen but its is gone before I can read it.

Any suggestions
73 Charlie WB2SNN 27904-27908



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180409/6c695a0b/attachment.html>

From loren at lorentedford.com  Tue Apr 10 00:18:25 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Mon, 9 Apr 2018 19:18:25 -0500
Subject: [App_rpt-users] Static IP Config
In-Reply-To: <20180410001231.5C8881E26EC@morty.keekles.org>
References: <1636031102.983789.1523314541892.ref@mail.yahoo.com>
 <1636031102.983789.1523314541892@mail.yahoo.com>
 <20180410001231.5C8881E26EC@morty.keekles.org>
Message-ID: <20180410001823.9C97A1E26EC@morty.keekles.org>

I just realized some might not understand what a gate ip is or broadcast etc.. So here is a demo example of how you could configure this.

Via ssh command line
nano /etc/network/interfaces

### Put the following in
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
? address 192.168.9.100
? netmask 255.255.255.255
? broadcast 192.168.9.100
? gateway 192.168.9.1
? dns-nameservers 8.8.8.8
## Just to be sure gateway is working correctly add the below
? post-up /sbin/ip route add 192.168.9.1? dev eth0
? post-up /sbin/ip route add default via 192.168.9.1
? pre-down /sbin/ip route delete 192.168.9.1 dev eth0
? pre-down /sbin/ip route delete default via 192.168.9.1

## End of /etc/network/interfaces

For ip?s not on the same network segment often times like in data center environments you will have to do some thing like this. Below is an example keep in mind typically all these ip?s will be public ip?s not private ip?s

Via ssh command line
nano /etc/network/interfaces

### Put the following in
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
? address 192.168.9.100
? netmask 255.255.255.255
? broadcast 192.168.9.100
? gateway 10.0.0.254
? dns-nameservers 8.8.8.8  ##Use their DNS name servers Trust me!
## Just to be sure gateway is working correctly add the below
? post-up /sbin/ip route add 10.0.0.254? dev eth0
? post-up /sbin/ip route add default via 10.0.0.254
? pre-down /sbin/ip route delete 10.0.0.254 dev eth0
? pre-down /sbin/ip route delete default via 10.0.0.254

## End of /etc/network/interfaces






Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Loren Tedford
Sent: Monday, April 9, 2018 7:12 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Static IP Config

Via ssh command line
nano /etc/network/interfaces

### Put the following in
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
? address ipaddr
? netmask 255.255.255.255
? broadcast ipaddr
? gateway 192.168.1.1
? dns-nameservers 8.8.8.8
## Just to be sure gateway is working correctly add the below
? post-up /sbin/ip route add Gatewayip? dev eth0
? post-up /sbin/ip route add default via Gatewayip
? pre-down /sbin/ip route delete Gatewayip dev eth0
? pre-down /sbin/ip route delete default via Gatewayip

## End of /etc/network/interfaces

I hope the above helps you in setting your static ip on your system..

Good luck if you need anything just holler!





Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: CHARLES BENN
Sent: Monday, April 9, 2018 5:56 PM
To: app_rpt-users at lists.allstarlink.org
Subject: [App_rpt-users] Static IP Config

I loaded the new image and did the original set up with DHCP.
I log on to the Console using root enter the info using the? ASL-Menu and save it but the IP remains DHCP.
After hitting OK there is a quick flash of some info at the bottom of the screen but its is gone before I can read it.

Any suggestions
73 Charlie WB2SNN 27904-27908





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180409/91accf65/attachment.html>

From asylthe at kc9ona.com  Tue Apr 10 03:08:38 2018
From: asylthe at kc9ona.com (Andrew Sylthe)
Date: Tue, 10 Apr 2018 03:08:38 +0000
Subject: [App_rpt-users] Static IP Config
In-Reply-To: <20180410001823.9C97A1E26EC@morty.keekles.org>
References: <1636031102.983789.1523314541892.ref@mail.yahoo.com>
 <1636031102.983789.1523314541892@mail.yahoo.com>
 <20180410001231.5C8881E26EC@morty.keekles.org>
 <20180410001823.9C97A1E26EC@morty.keekles.org>
Message-ID: <CAMbt3dufhvTQs2byfXO_D4dG_9PxK7jqBBoSeY1Y+5j9NibuYA@mail.gmail.com>

You've specified a subnet mask of 255.255.255.255. A /32 address when
specified as the primary address on the system won't be able to route.
Anyone trying to follow this "example" will get confused when nothing works.

On Mon, Apr 9, 2018, 7:18 PM Loren Tedford <loren at lorentedford.com> wrote:

> *I just realized some might not understand what a gate ip is or broadcast
> etc.. So here is a demo example of how you could configure this.*
>
>
>
> Via ssh command line
>
> nano /etc/network/interfaces
>
>
>
> ### Put the following in
>
> # This file describes the network interfaces available on your system
>
> # and how to activate them. For more information, see interfaces(5).
>
>
>
> source /etc/network/interfaces.d/*
>
>
>
> # The loopback network interface
>
> auto lo
>
> iface lo inet loopback
>
>
>
> # The primary network interface
>
> auto eth0
>
> allow-hotplug eth0
>
> iface eth0 inet static
>
>   address 192.168.9.100
>
>   netmask 255.255.255.255
>
>   broadcast 192.168.9.100
>
>   gateway 192.168.9.1
>
>   dns-nameservers 8.8.8.8
>
> ## Just to be sure gateway is working correctly add the below
>
>   post-up /sbin/ip route add 192.168.9.1  dev eth0
>
>   post-up /sbin/ip route add default via 192.168.9.1
>
>   pre-down /sbin/ip route delete 192.168.9.1 dev eth0
>
>   pre-down /sbin/ip route delete default via 192.168.9.1
>
>
>
> ## End of /etc/network/interfaces
>
>
>
> *For ip?s not on the same network segment often times like in data center
> environments you will have to do some thing like this. Below is an example
> keep in mind typically all these ip?s will be public ip?s not private ip?s*
>
>
>
> Via ssh command line
>
> nano /etc/network/interfaces
>
>
>
> ### Put the following in
>
> # This file describes the network interfaces available on your system
>
> # and how to activate them. For more information, see interfaces(5).
>
>
>
> source /etc/network/interfaces.d/*
>
>
>
> # The loopback network interface
>
> auto lo
>
> iface lo inet loopback
>
>
>
> # The primary network interface
>
> auto eth0
>
> allow-hotplug eth0
>
> iface eth0 inet static
>
>   address 192.168.9.100
>
>   netmask 255.255.255.255
>
>   broadcast 192.168.9.100
>
>   gateway 10.0.0.254
>
>   dns-nameservers 8.8.8.8  ##Use their DNS name servers Trust me!
>
> ## Just to be sure gateway is working correctly add the below
>
>   post-up /sbin/ip route add 10.0.0.254  dev eth0
>
>   post-up /sbin/ip route add default via 10.0.0.254
>
>   pre-down /sbin/ip route delete 10.0.0.254 dev eth0
>
>   pre-down /sbin/ip route delete default via 10.0.0.254
>
>
>
> ## End of /etc/network/interfaces
>
>
>
>
>
>
>
>
>
>
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *Loren Tedford <loren at lorentedford.com>
> *Sent: *Monday, April 9, 2018 7:12 PM
> *To: *Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> *Subject: *Re: [App_rpt-users] Static IP Config
>
>
>
> Via ssh command line
>
> nano /etc/network/interfaces
>
>
>
> ### Put the following in
>
> # This file describes the network interfaces available on your system
>
> # and how to activate them. For more information, see interfaces(5).
>
>
>
> source /etc/network/interfaces.d/*
>
>
>
> # The loopback network interface
>
> auto lo
>
> iface lo inet loopback
>
>
>
> # The primary network interface
>
> auto eth0
>
> allow-hotplug eth0
>
> iface eth0 inet static
>
>   address ipaddr
>
>   netmask 255.255.255.255
>
>   broadcast ipaddr
>
>   gateway 192.168.1.1
>
>   dns-nameservers 8.8.8.8
>
> ## Just to be sure gateway is working correctly add the below
>
>   post-up /sbin/ip route add Gatewayip  dev eth0
>
>   post-up /sbin/ip route add default via Gatewayip
>
>   pre-down /sbin/ip route delete Gatewayip dev eth0
>
>   pre-down /sbin/ip route delete default via Gatewayip
>
>
>
> ## End of /etc/network/interfaces
>
>
>
> I hope the above helps you in setting your static ip on your system..
>
>
>
> Good luck if you need anything just holler!
>
>
>
>
>
>
>
>
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *CHARLES BENN <cbenn7 at verizon.net>
> *Sent: *Monday, April 9, 2018 5:56 PM
> *To: *app_rpt-users at lists.allstarlink.org
> *Subject: *[App_rpt-users] Static IP Config
>
>
>
> I loaded the new image and did the original set up with DHCP.
>
> I log on to the Console using root enter the info using the  ASL-Menu and
> save it but the IP remains DHCP.
>
> After hitting OK there is a quick flash of some info at the bottom of the
> screen but its is gone before I can read it.
>
>
>
> Any suggestions
>
> 73 Charlie WB2SNN 27904-27908
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/73357468/attachment.html>

From shawpbx at gmail.com  Tue Apr 10 03:11:14 2018
From: shawpbx at gmail.com (David Shaw)
Date: Mon, 9 Apr 2018 20:11:14 -0700
Subject: [App_rpt-users] Static IP Config
In-Reply-To: <CAMbt3dufhvTQs2byfXO_D4dG_9PxK7jqBBoSeY1Y+5j9NibuYA@mail.gmail.com>
References: <1636031102.983789.1523314541892.ref@mail.yahoo.com>
 <1636031102.983789.1523314541892@mail.yahoo.com>
 <20180410001231.5C8881E26EC@morty.keekles.org>
 <20180410001823.9C97A1E26EC@morty.keekles.org>
 <CAMbt3dufhvTQs2byfXO_D4dG_9PxK7jqBBoSeY1Y+5j9NibuYA@mail.gmail.com>
Message-ID: <CAH4RvbLNymdZd9YYeEhy0QcCA5sc1skFUP6Dhicdruv9x-Zw1g@mail.gmail.com>

Should be
netmask 255.255.255.0



--
Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither
inclined nor determined to commit crimes. Such laws make things worse for
the assaulted and better for the assailants; they serve rather to encourage
than prevent homicides, for an unarmed man may be attacked with greater
confidence than an armed one."
Thomas Jefferson

On Mon, Apr 9, 2018 at 8:08 PM, Andrew Sylthe <asylthe at kc9ona.com> wrote:

> You've specified a subnet mask of 255.255.255.255. A /32 address when
> specified as the primary address on the system won't be able to route.
> Anyone trying to follow this "example" will get confused when nothing works.
>
> On Mon, Apr 9, 2018, 7:18 PM Loren Tedford <loren at lorentedford.com> wrote:
>
>> *I just realized some might not understand what a gate ip is or broadcast
>> etc.. So here is a demo example of how you could configure this.*
>>
>>
>>
>> Via ssh command line
>>
>> nano /etc/network/interfaces
>>
>>
>>
>> ### Put the following in
>>
>> # This file describes the network interfaces available on your system
>>
>> # and how to activate them. For more information, see interfaces(5).
>>
>>
>>
>> source /etc/network/interfaces.d/*
>>
>>
>>
>> # The loopback network interface
>>
>> auto lo
>>
>> iface lo inet loopback
>>
>>
>>
>> # The primary network interface
>>
>> auto eth0
>>
>> allow-hotplug eth0
>>
>> iface eth0 inet static
>>
>>   address 192.168.9.100
>>
>>   netmask 255.255.255.255
>>
>>   broadcast 192.168.9.100
>>
>>   gateway 192.168.9.1
>>
>>   dns-nameservers 8.8.8.8
>>
>> ## Just to be sure gateway is working correctly add the below
>>
>>   post-up /sbin/ip route add 192.168.9.1  dev eth0
>>
>>   post-up /sbin/ip route add default via 192.168.9.1
>>
>>   pre-down /sbin/ip route delete 192.168.9.1 dev eth0
>>
>>   pre-down /sbin/ip route delete default via 192.168.9.1
>>
>>
>>
>> ## End of /etc/network/interfaces
>>
>>
>>
>> *For ip?s not on the same network segment often times like in data center
>> environments you will have to do some thing like this. Below is an example
>> keep in mind typically all these ip?s will be public ip?s not private ip?s*
>>
>>
>>
>> Via ssh command line
>>
>> nano /etc/network/interfaces
>>
>>
>>
>> ### Put the following in
>>
>> # This file describes the network interfaces available on your system
>>
>> # and how to activate them. For more information, see interfaces(5).
>>
>>
>>
>> source /etc/network/interfaces.d/*
>>
>>
>>
>> # The loopback network interface
>>
>> auto lo
>>
>> iface lo inet loopback
>>
>>
>>
>> # The primary network interface
>>
>> auto eth0
>>
>> allow-hotplug eth0
>>
>> iface eth0 inet static
>>
>>   address 192.168.9.100
>>
>>   netmask 255.255.255.255
>>
>>   broadcast 192.168.9.100
>>
>>   gateway 10.0.0.254
>>
>>   dns-nameservers 8.8.8.8  ##Use their DNS name servers Trust me!
>>
>> ## Just to be sure gateway is working correctly add the below
>>
>>   post-up /sbin/ip route add 10.0.0.254  dev eth0
>>
>>   post-up /sbin/ip route add default via 10.0.0.254
>>
>>   pre-down /sbin/ip route delete 10.0.0.254 dev eth0
>>
>>   pre-down /sbin/ip route delete default via 10.0.0.254
>>
>>
>>
>> ## End of /etc/network/interfaces
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Loren Tedford (KC9ZHV)
>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>> Fax: 1-618-551-2755
>> Email: loren at lorentedford.com
>> Email: KC9ZHV at KC9ZHV.com
>> http://www.lorentedford.com
>> http://www.kc9zhv.com
>> http://forum.kc9zhv.com
>> http://hub.kc9zhv.com
>> http://Ltcraft.net
>> http://voipham.com
>>
>>
>>
>> *From: *Loren Tedford <loren at lorentedford.com>
>> *Sent: *Monday, April 9, 2018 7:12 PM
>> *To: *Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>> *Subject: *Re: [App_rpt-users] Static IP Config
>>
>>
>>
>> Via ssh command line
>>
>> nano /etc/network/interfaces
>>
>>
>>
>> ### Put the following in
>>
>> # This file describes the network interfaces available on your system
>>
>> # and how to activate them. For more information, see interfaces(5).
>>
>>
>>
>> source /etc/network/interfaces.d/*
>>
>>
>>
>> # The loopback network interface
>>
>> auto lo
>>
>> iface lo inet loopback
>>
>>
>>
>> # The primary network interface
>>
>> auto eth0
>>
>> allow-hotplug eth0
>>
>> iface eth0 inet static
>>
>>   address ipaddr
>>
>>   netmask 255.255.255.255
>>
>>   broadcast ipaddr
>>
>>   gateway 192.168.1.1
>>
>>   dns-nameservers 8.8.8.8
>>
>> ## Just to be sure gateway is working correctly add the below
>>
>>   post-up /sbin/ip route add Gatewayip  dev eth0
>>
>>   post-up /sbin/ip route add default via Gatewayip
>>
>>   pre-down /sbin/ip route delete Gatewayip dev eth0
>>
>>   pre-down /sbin/ip route delete default via Gatewayip
>>
>>
>>
>> ## End of /etc/network/interfaces
>>
>>
>>
>> I hope the above helps you in setting your static ip on your system..
>>
>>
>>
>> Good luck if you need anything just holler!
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Loren Tedford (KC9ZHV)
>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>> Fax: 1-618-551-2755
>> Email: loren at lorentedford.com
>> Email: KC9ZHV at KC9ZHV.com
>> http://www.lorentedford.com
>> http://www.kc9zhv.com
>> http://forum.kc9zhv.com
>> http://hub.kc9zhv.com
>> http://Ltcraft.net
>> http://voipham.com
>>
>>
>>
>> *From: *CHARLES BENN <cbenn7 at verizon.net>
>> *Sent: *Monday, April 9, 2018 5:56 PM
>> *To: *app_rpt-users at lists.allstarlink.org
>> *Subject: *[App_rpt-users] Static IP Config
>>
>>
>>
>> I loaded the new image and did the original set up with DHCP.
>>
>> I log on to the Console using root enter the info using the  ASL-Menu and
>> save it but the IP remains DHCP.
>>
>> After hitting OK there is a quick flash of some info at the bottom of the
>> screen but its is gone before I can read it.
>>
>>
>>
>> Any suggestions
>>
>> 73 Charlie WB2SNN 27904-27908
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/
>> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180409/51a5a5ba/attachment.html>

From cbenn7 at verizon.net  Tue Apr 10 03:18:25 2018
From: cbenn7 at verizon.net (CHARLES BENN)
Date: Tue, 10 Apr 2018 03:18:25 +0000 (UTC)
Subject: [App_rpt-users] Static IP Config
References: <86358041.1047483.1523330305907.ref@mail.yahoo.com>
Message-ID: <86358041.1047483.1523330305907@mail.yahoo.com>

I should have been a bit clearer in describing my problem. I am trying to use the install menu asl-menu.I follow the menu prompts enter the info, highlight Save and hit ok . it seems to go but does not change, the same happens if i try to change the name from repeater to something else.? All the install info? Node number , my call and password entered ok, the box will connect and register but I am unable to change from DHCP to Static.I tried using? both the root log i and the repeater log in from the console with the same results.
ThanksCharlie WB2SNN

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/bf4772d4/attachment.html>

From mike at midnighteng.com  Tue Apr 10 02:59:50 2018
From: mike at midnighteng.com (Mike)
Date: Mon, 09 Apr 2018 22:59:50 -0400
Subject: [App_rpt-users] Briadcastify
In-Reply-To: <5994D260-45E9-420D-96D1-AF7C8A21B029@yahoo.com>
References: <5994D260-45E9-420D-96D1-AF7C8A21B029@yahoo.com>
Message-ID: <op.zg8il0pmf8cmrb@cool-w7.hsd1.oh.comcast.net>


Not being a specific issue any of us can speak to (I would think),
I might suggest areas to look in any situation like this...

Do you have any software on the system or a cron job that would update  
software and possibly break a installed service that is needed by your  
installation(s).

Reseting your router/nat may help since the amount of attacks has sharply  
increased lately, in fact one that got me on a vps a few days ago changed  
ownership of files on the system.

I did not realize it right away, and it spread, to eventually lock me out  
of the system.
But you do need to maintain a fair firewall and keep up with the latest in  
attacks.

You can also have your router reboot in the early morning to help minimize  
errors from failed attacks.(internal cron job if your firmware allows).

...just some probably useless thoughts...

    ...mike/kb8jnm

On Thu, 05 Apr 2018 07:07:19 -0400, David Waters <dwaters5 at yahoo.com>  
wrote:

> I was streaming my node?s audio to scanners using broadcastify. It quit  
> working 4 days ago. Everything is the same all files and config files to  
> run it are in my node but it will not stream audio. I try to start it  
> manually and I get error file not found. But as I said all files and  
> directories are there. All files match what they were before when it  
> worked, but it doesn?t work. I tried to download the files needed again  
> but I can not because it says files are in my node. I am at a loss not  
> sure where to go. I don?t know how to remove all files from node to  
> start over.
> Looking for serious help.
> AB3MZ
>
> David Waters
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit  
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and  
> scroll down to the bottom of the page. Enter your email address and  
> press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email  
> confirmation. If you have trouble unsubscribing, please send a message  
> to the list detailing the problem.


-- 
Using Opera's mail client: http://www.opera.com/mail/


From mike at midnighteng.com  Tue Apr 10 02:59:51 2018
From: mike at midnighteng.com (Mike)
Date: Mon, 09 Apr 2018 22:59:51 -0400
Subject: [App_rpt-users] ASL on a VPS/hosted/cloud server
In-Reply-To: <1523122058.982.3.camel@Project23D.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
 <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
 <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
 <1523122058.982.3.camel@Project23D.com>
Message-ID: <op.zg8il1f7f8cmrb@cool-w7.hsd1.oh.comcast.net>

It's not for everyone.

But, I find comfort on having local contability with systems without
the need for allstarlink.org
Not that there is anything wrong with that.
A back-up and experiment for for the future connectivity.
To each his own for needs and desire.

...mike/kb8jnm

btw, I don't know where you get a vps for $1 a month.(not sure who  
mentioned that)
I have one @ $5/m the others cost me 10 or more.


On Sat, 07 Apr 2018 13:27:38 -0400, Benjamin Naber  
<Benjamin at project23d.com> wrote:

> Forgive the nativity, but what is the point of ASL nodes being hosted
> on a VPS?
>
> For a hub node I understand, and do so myself. However, there is a
> growing number of hub nodes that do not do anything.
>
> I understand a public hosted hub node is great for connecting to with
> the web transceiver and phone portal, but I sure hope this is not going
> to become the norm.
>
> We have a few guys that come onto our system that only use their phone,
> and honestly, I wish they would use a radio instead. For the principle
> of the matter, but also, phones have terrible audio and tend to pick up
> noise that needs not broadcasting.
>
> ~Benjamin, KB9LFZ
>
>
> On Fri, 2018-04-06 at 20:28 -0400, Steve Zingman wrote:
>> You are going to have to figure out how to get the proper kernel
>> headers for your running kernel. One possibility to check is either
>> run aptitude and check if you have any pending upgrades, and if so,
>> is one of them a kernel upgrade. Pretty much the same thin by running
>> apt-get dist-upgrade. Without the proper kernel headers, DAHDI will
>> not build. You do not have to "make" it. once you have the proper
>> kernel headers, you can reinstall dahdi with apt-get install --
>> reinstall asl-dahdi-linux-dkms
>>
>> On 04/06/2018 08:22 PM, Monty wrote:
>> > Reading package lists... Done
>> > Building dependency tree
>> > Reading state information... Done
>> > E: Unable to locate package linux-headers-2.6.32-042stab127.2
>> > E: Couldn't find any package by glob 'linux-headers-2.6.32-
>> > 042stab127.2'
>> > E: Couldn't find any package by regex 'linux-headers-2.6.32-
>> > 042stab127.2'
>> >
>> >
>> >
>> > Monty
>> >
>> > On Fri, Apr 6, 2018 at 5:10 PM, Steve Zingman <szingman at msgstor.com
>> > > wrote:
>> > > Without the proper kernel header, you can't build DAHDI.> > What is  
>> the result of "apt-get install linux-headers-`uname -r`
>> > > -y"
>> > >
>> > >
>> > > On 04/06/2018 08:05 PM, Monty wrote:
>> > > > Error from make command: "You do not appear to have the sources
>> > > > for the 2.6.32-042stab127.2 kernel installed" (Sorry I didn't
>> > > > highlight in the initial email.)
>> > > >
>> > > > I have tried this command, per the Readme of Dahdi: make
>> > > > KVERS=4.9.0-6-amd64
>> > > >
>> > > > I do not get any errors, then run:
>> > > >
>> > > > make install KVERS=4.9.0-6-amd64
>> > > >
>> > > > I get "DADHI installed successfully", reboot, and I still get
>> > > > the same error messages in the CLI I listed below.
>> > > >
>> > > >
>> > > >
>> > > > Monty
>> > > >
>> > > > On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman at msgstor
>> > > > .com> wrote:
>> > > > > What error did you get?
>> > > > >
>> > > > >
>> > > > > On 04/06/2018 07:15 PM, Monty wrote:
>> > > > > > Hello All,
>> > > > > >
>> > > > > > I'm trying to install the allstarlink package on my Debian
>> > > > > > VPS.  I followed the instructions on the wiki:
>> > > > > >
>> > > > > > cd /tmp
>> > > > > > wget https://github.com/AllStarLink/Asterisk/raw/develop/al
>> > > > > > lstar/repository/install-repository
>> > > > > > chmod +x install-repository
>> > > > > > ./install-repository
>> > > > > >
>> > > > > > If Raspbian: apt-get install raspberrypi-kernel-headers -y
>> > > > > >
>> > > > > > Otherwise: apt-get install linux-headers-`uname -r` -y
>> > > > > >
>> > > > > > apt-get update
>> > > > > > apt-get install allstarlink -y
>> > > > > > I did get an error on the linux-headers command.  I
>> > > > > > installed what I believe is the latest headers from apt-get
>> > > > > > (4.9.0-6-amd64).
>> > > > > >
>> > > > > > Asterisk is not able to run, and I'm getting the following
>> > > > > > messages in the CLI when I run asterisk manually:
>> > > > > >
>> > > > > > [Apr  6 16:05:35] WARNING[14976]: app_rpt.c:22240
>> > > > > > rpt_master: rpt_thread restarted on node 28615
>> > > > > > [Apr  6 16:05:35] WARNING[15001]: chan_dahdi.c:928
>> > > > > > dahdi_open: Unable to open '/dev/dahdi/pseudo': No such
>> > > > > > file or directory
>> > > > > > [Apr  6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup:
>> > > > > > Unable to dup channel: No such file or directory
>> > > > > >
>> > > > > > Seems to be dahdi is missing.  Any ideas how to remedy?
>> > > > > >
>> > > > > > I have tried to recompile Dahdi from:
>> > > > > >
>> > > > > > http://wiki.allstarlink.org/wiki/DAHDI_Make
>> > > > > >
>> > > > > > After running the "make" command I get the following:
>> > > > > >
>> > > > > > "You do not appear to have the sources for the 2.6.32-
>> > > > > > 042stab127.2 kernel installed."
>> > > > > >
>> > > > > > I can't seem to find how to update/install 2.6.32-
>> > > > > > 042stab127.2 kernel.
>> > > > > >
>> > > > > >
>> > > > > > Monty
>> > > > > > KE7JVX
>> > > > > >
>> > > > > >
>> > > > > > _______________________________________________
>> > > > > > App_rpt-users mailing list
>> > > > > > App_rpt-users at lists.allstarlink.org
>> > > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_r
>> > > > > > pt-users
>> > > > > >
>> > > > > > To unsubscribe from this list please visit http://lists.all
>> > > > > > starlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> > > > > > scroll down to the bottom of the page. Enter your email
>> > > > > > address and press the "Unsubscribe or edit options button"
>> > > > > > You do not need a password to unsubscribe, you can do it
>> > > > > > via email confirmation. If you have trouble unsubscribing,
>> > > > > > please send a message to the list detailing the problem.> > >  
>> > > > > >
>> > > > > _______________________________________________
>> > > > > App_rpt-users mailing list
>> > > > > App_rpt-users at lists.allstarlink.org
>> > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt
>> > > > > -users
>> > > > >
>> > > > > To unsubscribe from this list please visit http://lists.allst
>> > > > > arlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> > > > > down to the bottom of the page. Enter your email address and
>> > > > > press the "Unsubscribe or edit options button"
>> > > > > You do not need a password to unsubscribe, you can do it via
>> > > > > email confirmation. If you have trouble unsubscribing, please
>> > > > > send a message to the list detailing the problem.> > > >
>> > > >
>> > > >
>> > > >
>> > > > _______________________________________________
>> > > > App_rpt-users mailing list
>> > > > App_rpt-users at lists.allstarlink.org
>> > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-u
>> > > > sers
>> > > >
>> > > > To unsubscribe from this list please visit http://lists.allstar
>> > > > link.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
>> > > > to the bottom of the page. Enter your email address and press
>> > > > the "Unsubscribe or edit options button"
>> > > > You do not need a password to unsubscribe, you can do it via
>> > > > email confirmation. If you have trouble unsubscribing, please
>> > > > send a message to the list detailing the problem.> > > >
>> > > _______________________________________________
>> > > App_rpt-users mailing list
>> > > App_rpt-users at lists.allstarlink.org
>> > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-use
>> > > rs
>> > >
>> > > To unsubscribe from this list please visit http://lists.allstarli
>> > > nk.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
>> > > the bottom of the page. Enter your email address and press the
>> > > "Unsubscribe or edit options button"
>> > > You do not need a password to unsubscribe, you can do it via
>> > > email confirmation. If you have trouble unsubscribing, please
>> > > send a message to the list detailing the problem.> >
>> >
>> >
>> >
>> > _______________________________________________
>> > App_rpt-users mailing list
>> > App_rpt-users at lists.allstarlink.org
>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> >
>> > To unsubscribe from this list please visit http://lists.allstarlink
>> > .org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>> > bottom of the page. Enter your email address and press the
>> > "Unsubscribe or edit options button"
>> > You do not need a password to unsubscribe, you can do it via email
>> > confirmation. If you have trouble unsubscribing, please send a
>> > message to the list detailing the problem.  
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.o
>> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>> bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a
>> message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit  
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and  
> scroll down to the bottom of the page. Enter your email address and  
> press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email  
> confirmation. If you have trouble unsubscribing, please send a message  
> to the list detailing the problem.


-- 
Using Opera's mail client: http://www.opera.com/mail/


From Bryan at bryanfields.net  Tue Apr 10 06:18:05 2018
From: Bryan at bryanfields.net (Bryan Fields)
Date: Tue, 10 Apr 2018 02:18:05 -0400
Subject: [App_rpt-users] Briadcastify
In-Reply-To: <5994D260-45E9-420D-96D1-AF7C8A21B029@yahoo.com>
References: <5994D260-45E9-420D-96D1-AF7C8A21B029@yahoo.com>
Message-ID: <a9ba179c-f704-a088-5838-25c390c4ebdb@bryanfields.net>

On 4/5/18 7:07 AM, David Waters wrote:
> I was streaming my node?s audio to scanners using broadcastify. It quit
> working 4 days ago. Everything is the same all files and config files to
> run it are in my node but it will not stream audio. I try to start it
> manually and I get error file not found. But as I said all files and
> directories are there. All files match what they were before when it
> worked, but it doesn?t work. I tried to download the files needed again but
> I can not because it says files are in my node. I am at a loss not sure
> where to go. I don?t know how to remove all files from node to start over.

My money is on a typo.

You need to post the errors, and what config you have in outstreamcmd you're
using for this.
-- 
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net


From thorn at myactv.net  Tue Apr 10 10:03:06 2018
From: thorn at myactv.net (Greg Thornwall)
Date: Tue, 10 Apr 2018 06:03:06 -0400
Subject: [App_rpt-users] ASL on a VPS/hosted/cloud server
In-Reply-To: <op.zg8il1f7f8cmrb@cool-w7.hsd1.oh.comcast.net>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
 <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
 <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
 <1523122058.982.3.camel@Project23D.com>
 <op.zg8il1f7f8cmrb@cool-w7.hsd1.oh.comcast.net>
Message-ID: <470e35c2-68f8-4015-21ba-2cab99b9683e@myactv.net>

https://ipxcore.com/


On 04/09/2018 10:59 PM, Mike wrote:
>
> btw, I don't know where you get a vps for $1 a month.(not sure who
> mentioned that)
> I have one @ $5/m the others cost me 10 or more.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/aa328faf/attachment.html>

From nhardman1428 at gmail.com  Tue Apr 10 12:14:19 2018
From: nhardman1428 at gmail.com (Nate Hardman)
Date: Tue, 10 Apr 2018 08:14:19 -0400
Subject: [App_rpt-users] Static IP Config
In-Reply-To: <86358041.1047483.1523330305907@mail.yahoo.com>
References: <86358041.1047483.1523330305907.ref@mail.yahoo.com>
 <86358041.1047483.1523330305907@mail.yahoo.com>
Message-ID: <CAC9hojVb__86xXryzxn8n_PFHrqVVZMukY_Anf7QZKa1p-7g8Q@mail.gmail.com>

What system is this?  Raspberry Pi? Server? Desktop? Laptop? VM?

On Mon, Apr 9, 2018 at 11:18 PM, CHARLES BENN <cbenn7 at verizon.net> wrote:

> I should have been a bit clearer in describing my problem. I am trying to
> use the install menu asl-menu.
> I follow the menu prompts enter the info, highlight Save and hit ok . it
> seems to go but does not change, the same happens if i try to change the
> name from repeater to something else.  All the install info  Node number ,
> my call and password entered ok, the box will connect and register but I am
> unable to change from DHCP to Static.
> I tried using  both the root log i and the repeater log in from the
> console with the same results.
>
> Thanks
> Charlie WB2SNN
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 

Nathan Hardman
nhardman1428 at gmail.com
N8THN at ARRL.NET
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/3c7c1b7f/attachment.html>

From szingman at msgstor.com  Tue Apr 10 12:45:42 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Tue, 10 Apr 2018 12:45:42 +0000 (UTC)
Subject: [App_rpt-users] Static IP Config
In-Reply-To: <CAC9hojVb__86xXryzxn8n_PFHrqVVZMukY_Anf7QZKa1p-7g8Q@mail.gmail.com>
References: <86358041.1047483.1523330305907.ref@mail.yahoo.com>
 <86358041.1047483.1523330305907@mail.yahoo.com>
 <CAC9hojVb__86xXryzxn8n_PFHrqVVZMukY_Anf7QZKa1p-7g8Q@mail.gmail.com>
Message-ID: <4D33E76AA107063C.74b7ccc4-88fe-470e-bf0b-0c3c02ababc8@mail.outlook.com>

Mine is x86




sent via smoke signal (AT&T)







On Tue, Apr 10, 2018 at 8:14 AM -0400, "Nate Hardman" <nhardman1428 at gmail.com> wrote:










What system is this?? Raspberry Pi? Server? Desktop? Laptop? VM?
On Mon, Apr 9, 2018 at 11:18 PM, CHARLES BENN <cbenn7 at verizon.net> wrote:
I should have been a bit clearer in describing my problem. I am trying to use the install menu asl-menu.I follow the menu prompts enter the info, highlight Save and hit ok . it seems to go but does not change, the same happens if i try to change the name from repeater to something else.? All the install info? Node number , my call and password entered ok, the box will connect and register but I am unable to change from DHCP to Static.I tried using? both the root log i and the repeater log in from the console with the same results.
ThanksCharlie WB2SNN


_______________________________________________

App_rpt-users mailing list

App_rpt-users at lists.allstarlink.org

http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users



To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"

You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



-- 

Nathan Hardmannhardman1428 at gmail.comN8THN@ARRL.NET








-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/e24e1bc5/attachment.html>

From loren at lorentedford.com  Tue Apr 10 13:59:37 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Tue, 10 Apr 2018 08:59:37 -0500
Subject: [App_rpt-users] Static IP Config
In-Reply-To: <CAMbt3dufhvTQs2byfXO_D4dG_9PxK7jqBBoSeY1Y+5j9NibuYA@mail.gmail.com>
References: <1636031102.983789.1523314541892.ref@mail.yahoo.com>
 <1636031102.983789.1523314541892@mail.yahoo.com>
 <20180410001231.5C8881E26EC@morty.keekles.org>
 <20180410001823.9C97A1E26EC@morty.keekles.org>
 <CAMbt3dufhvTQs2byfXO_D4dG_9PxK7jqBBoSeY1Y+5j9NibuYA@mail.gmail.com>
Message-ID: <20180410135938.23F111E1925@morty.keekles.org>

Andrew my bad I did over look this for local configuration However I will kinda give you a hint of how it works in data center environments I won?t go any further then this link though because here lately we have even been doing more crazier stuff than this..

http://docs.ovh.ca/en/guides-network-bridging.html


Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Andrew Sylthe
Sent: Monday, April 9, 2018 10:09 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Static IP Config

You've specified a subnet mask of 255.255.255.255. A /32 address when specified as the primary address on the system won't be able to route. Anyone trying to follow this "example" will get confused when nothing works.

On Mon, Apr 9, 2018, 7:18 PM Loren Tedford <loren at lorentedford.com> wrote:
I just realized some might not understand what a gate ip is or broadcast etc.. So here is a demo example of how you could configure this.
?
Via ssh command line
nano /etc/network/interfaces
?
### Put the following in
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
?
source /etc/network/interfaces.d/*
?
# The loopback network interface
auto lo
iface lo inet loopback
?
# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
? address 192.168.9.100
? netmask 255.255.255.255
? broadcast 192.168.9.100
? gateway 192.168.9.1
? dns-nameservers 8.8.8.8
## Just to be sure gateway is working correctly add the below
? post-up /sbin/ip route add 192.168.9.1? dev eth0
? post-up /sbin/ip route add default via 192.168.9.1
? pre-down /sbin/ip route delete 192.168.9.1 dev eth0
? pre-down /sbin/ip route delete default via 192.168.9.1
?
## End of /etc/network/interfaces
?
For ip?s not on the same network segment often times like in data center environments you will have to do some thing like this. Below is an example keep in mind typically all these ip?s will be public ip?s not private ip?s
?
Via ssh command line
nano /etc/network/interfaces
?
### Put the following in
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
?
source /etc/network/interfaces.d/*
?
# The loopback network interface
auto lo
iface lo inet loopback
?
# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
? address 192.168.9.100
? netmask 255.255.255.255
? broadcast 192.168.9.100
? gateway 10.0.0.254
? dns-nameservers 8.8.8.8? ##Use their DNS name servers Trust me!
## Just to be sure gateway is working correctly add the below
? post-up /sbin/ip route add 10.0.0.254? dev eth0
? post-up /sbin/ip route add default via 10.0.0.254
? pre-down /sbin/ip route delete 10.0.0.254 dev eth0
? pre-down /sbin/ip route delete default via 10.0.0.254
?
## End of /etc/network/interfaces
?
?
?
?
?
?
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
?
From: Loren Tedford
Sent: Monday, April 9, 2018 7:12 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Static IP Config
?
Via ssh command line
nano /etc/network/interfaces
?
### Put the following in
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
?
source /etc/network/interfaces.d/*
?
# The loopback network interface
auto lo
iface lo inet loopback
?
# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
? address ipaddr
? netmask 255.255.255.255
? broadcast ipaddr
? gateway 192.168.1.1
? dns-nameservers 8.8.8.8
## Just to be sure gateway is working correctly add the below
? post-up /sbin/ip route add Gatewayip? dev eth0
? post-up /sbin/ip route add default via Gatewayip
? pre-down /sbin/ip route delete Gatewayip dev eth0
? pre-down /sbin/ip route delete default via Gatewayip
?
## End of /etc/network/interfaces
?
I hope the above helps you in setting your static ip on your system..
?
Good luck if you need anything just holler!
?
?
?
?
?
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
?
From: CHARLES BENN
Sent: Monday, April 9, 2018 5:56 PM
To: app_rpt-users at lists.allstarlink.org
Subject: [App_rpt-users] Static IP Config
?
I loaded the new image and did the original set up with DHCP.
I log on to the Console using root enter the info using the? ASL-Menu and save it but the IP remains DHCP.
After hitting OK there is a quick flash of some info at the bottom of the screen but its is gone before I can read it.
?
Any suggestions
73 Charlie WB2SNN 27904-27908
?
?
?
?

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/651883e4/attachment.html>

From ky1u at gmx.com  Tue Apr 10 15:22:51 2018
From: ky1u at gmx.com (Greg)
Date: Tue, 10 Apr 2018 11:22:51 -0400
Subject: [App_rpt-users] GPIO to trigger alarms
In-Reply-To: <mailman.1.1522342802.14901.arm-allstar@hamvoip.org>
References: <mailman.1.1522342802.14901.arm-allstar@hamvoip.org>
Message-ID: <e8ee957e-8058-0bfc-7ee5-a4f518848bab@gmx.com>

Is there any info on using GPIO or serial pins with dry contact switches 
to call scripts to say TX an audio file as an alert?
Thanks
Greg


From petem001 at gmail.com  Tue Apr 10 15:52:03 2018
From: petem001 at gmail.com (Pierre Martel)
Date: Tue, 10 Apr 2018 11:52:03 -0400
Subject: [App_rpt-users] ASL on a VPS/hosted/cloud server
In-Reply-To: <470e35c2-68f8-4015-21ba-2cab99b9683e@myactv.net>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
 <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
 <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
 <1523122058.982.3.camel@Project23D.com>
 <op.zg8il1f7f8cmrb@cool-w7.hsd1.oh.comcast.net>
 <470e35c2-68f8-4015-21ba-2cab99b9683e@myactv.net>
Message-ID: <CAL8dJwqu_zq4KdqXZs_6fMsSBQGWY7cz0urXCRXrdSi3NU2htA@mail.gmail.com>

wonder if asl would run on a small footprint as small as the one for 1$ a
months there... Cant try they are out of stock.. I would love to try!




2018-04-10 6:03 GMT-04:00 Greg Thornwall <thorn at myactv.net>:

> https://ipxcore.com/
>
> On 04/09/2018 10:59 PM, Mike wrote:
>
>
> btw, I don't know where you get a vps for $1 a month.(not sure who
> mentioned that)
> I have one @ $5/m the others cost me 10 or more.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/e10d483a/attachment.html>

From John at n2yp.com  Tue Apr 10 18:58:28 2018
From: John at n2yp.com (John Rudolph- N2YP)
Date: Tue, 10 Apr 2018 14:58:28 -0400
Subject: [App_rpt-users] Static IP
In-Reply-To: <mailman.3.1523376001.11222.app_rpt-users@lists.allstarlink.org>
References: <mailman.3.1523376001.11222.app_rpt-users@lists.allstarlink.org>
Message-ID: <E3B99005-6DAF-4ECD-B009-E937DFFC1E85@n2yp.com>

I had some issues like this in the beginning as well but it included any changes made to my conf files and it ended up being because the image didn't install correctly because I was trying to reuse a DVD. With that said I do have everything working now except the menu for changing the system name and using the menu to install webmin. I have since installed it maunally after many attempts automatically.


I should have been a bit clearer in describing my problem. I am trying to use the install menu asl-menu.I follow the menu prompts enter the info, highlight Save and hit ok . it seems to go but does not change, the same happens if i try to change the name from repeater to something else.  All the install info  Node number , my call and password entered ok, the box will connect and register but I am unable to change from DHCP to Static.I tried using  both the root log i and the repeater log in from the console with the same results.
ThanksCharlie WB2SNN
John Rudolph
Amateur Radio Op N2YP
Unadilla,NY
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/779da964/attachment.html>

From thorn at myactv.net  Wed Apr 11 00:46:56 2018
From: thorn at myactv.net (Greg Thornwall)
Date: Tue, 10 Apr 2018 20:46:56 -0400
Subject: [App_rpt-users] ASL on a VPS/hosted/cloud server
In-Reply-To: <CAL8dJwqu_zq4KdqXZs_6fMsSBQGWY7cz0urXCRXrdSi3NU2htA@mail.gmail.com>
References: <CAN3ondvwXXKoY1t1uPQT4HzuLWok+C1iPqvfSqaGU92n_sqn=g@mail.gmail.com>
 <042e8d70-bbd0-51f2-f6ad-caa62adf532b@msgstor.com>
 <CAN3ondsTWgAQYqC42dyk4rnfoGORR6XzKdroun6ag-ec7NM-3g@mail.gmail.com>
 <a8bd994d-db7d-8d64-22d9-c084a0bfa2e9@msgstor.com>
 <CAN3ondu0C_yxPcvARnVpkrP76d7m-Q7a_RRUPTAAZG2XHwTa+A@mail.gmail.com>
 <b00f30df-ded0-01b2-023d-dae64830a299@msgstor.com>
 <1523122058.982.3.camel@Project23D.com>
 <op.zg8il1f7f8cmrb@cool-w7.hsd1.oh.comcast.net>
 <470e35c2-68f8-4015-21ba-2cab99b9683e@myactv.net>
 <CAL8dJwqu_zq4KdqXZs_6fMsSBQGWY7cz0urXCRXrdSi3NU2htA@mail.gmail.com>
Message-ID: <74a3be1a-3c40-d41a-891e-5faa22786f6f@myactv.net>

They go out of stock now and then, try again later.

You need at least the $3.99/month for a hub:

https://ipxcore.com/kvm-vps


On 04/10/2018 11:52 AM, Pierre Martel wrote:
> wonder if asl would run on a small footprint as small as the one for
> 1$ a months there... Cant try they are out of stock.. I would love to try!
>
>
>
>
> 2018-04-10 6:03 GMT-04:00 Greg Thornwall <thorn at myactv.net
> <mailto:thorn at myactv.net>>:
>
>     https://ipxcore.com/
>
>
>     On 04/09/2018 10:59 PM, Mike wrote:
>>
>>     btw, I don't know where you get a vps for $1 a month.(not sure
>>     who mentioned that)
>>     I have one @ $5/m the others cost me 10 or more.
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/89030173/attachment.html>

From Bryan at bryanfields.net  Wed Apr 11 14:05:14 2018
From: Bryan at bryanfields.net (Bryan Fields)
Date: Wed, 11 Apr 2018 10:05:14 -0400
Subject: [App_rpt-users] streaming node issues
In-Reply-To: <310364464.1695085.1523451524842@mail.yahoo.com>
References: <310364464.1695085.1523451524842.ref@mail.yahoo.com>
 <310364464.1695085.1523451524842@mail.yahoo.com>
Message-ID: <9bb8a617-6abc-2294-3ccc-f4ee14d22345@bryanfields.net>

On 4/11/18 8:58 AM, David Waters wrote:
> Bryanhere is what we have  this used to work but now it puts us into a
> sterad transmitt mode on our radio attached to node.  we have startup line
> commented out at present,
> 
> Command line to startstream: outstreamcmd=/bin/sh,-c,/usr/bin/lame
> 
> --preset cbr 16 -r -mm -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
> 
> /usr/bin/ezstream -qvc/etc/ezstream.xml

<snip>

> -bash: --preset:command not found

This is command from the shell saying it's trying to execute the one of the
flags to lame, rather than pass it to lame on the command line.

You have something wrong with your command, perhaps it's in quoted properly or
you have a CR/LF in it's place.

I've replied to the list so we all can benefit from this, and yahoo is not
allowing emails again.

-- 
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net


From kc8qch at gmail.com  Wed Apr 11 14:33:49 2018
From: kc8qch at gmail.com (Jeffrey Lehman, KC8QCH)
Date: Wed, 11 Apr 2018 10:33:49 -0400
Subject: [App_rpt-users] streaming node issues
In-Reply-To: <9bb8a617-6abc-2294-3ccc-f4ee14d22345@bryanfields.net>
References: <310364464.1695085.1523451524842.ref@mail.yahoo.com>
 <310364464.1695085.1523451524842@mail.yahoo.com>
 <9bb8a617-6abc-2294-3ccc-f4ee14d22345@bryanfields.net>
Message-ID: <a5c85e1d-3723-60f8-2882-f0d71c54bece@gmail.com>

You are missing a space between the mm in the command. Try this one.

outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 
--bitwidth 16 - - 2> /tmp/stream.status | /usr/bin/ezstream -qvc 
/etc/ezstream.xml

I know this one works because I just pulled it off our node that is 
running broadcastify. I added the ability to send the status to a file. 
I don't run that on our node, but this should still work.

Jeff, KC8QCH


On 4/11/2018 10:05, Bryan Fields wrote:
> On 4/11/18 8:58 AM, David Waters wrote:
>> Bryanhere is what we have  this used to work but now it puts us into a
>> sterad transmitt mode on our radio attached to node.  we have startup line
>> commented out at present,
>>
>> Command line to startstream: outstreamcmd=/bin/sh,-c,/usr/bin/lame
>>
>> --preset cbr 16 -r -mm -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
>>
>> /usr/bin/ezstream -qvc/etc/ezstream.xml
> <snip>
>
>> -bash: --preset:command not found
> This is command from the shell saying it's trying to execute the one of the
> flags to lame, rather than pass it to lame on the command line.
>
> You have something wrong with your command, perhaps it's in quoted properly or
> you have a CR/LF in it's place.
>
> I've replied to the list so we all can benefit from this, and yahoo is not
> allowing emails again.
>

-- 
Jeff Lehman, KC8QCH
https://kc8qch.ddns.net
kc8qch at gmail.com

Webmaster
Hamilton Couny ARPSC
https://www.hamcoarpsc.org
hamcoarpsc at gmail.com

AllStar 47374 Node Administrator
World Wide Amateur Radio Guild
https://theguildglobal.org



From jerutley at gmail.com  Wed Apr 11 21:43:05 2018
From: jerutley at gmail.com (Jeremy Utley)
Date: Wed, 11 Apr 2018 16:43:05 -0500
Subject: [App_rpt-users] Problems with setup from newest image
Message-ID: <059d01d3d1de$13869b90$3a93d2b0$@gmail.com>

So last week while I was on vacation, I had an SD card filesystem go corrupt
- lots of damaged files, Asterisk segfaulting on startup, all kinds of weird
stuff happening.  So I decided to rebuild this node (45984) with the newest
stuff - this was my last Arch-based node, and I wanted to get back to the
Debian base.  So, I pulled down the 20180228 raspbian stretch image, wrote
it to a new SD card, booted up the Pi, ssh'd in, expanded the filesystem,
updated all packages to latest, and went thru the setup process.  BTW, I
love the new menu-based system - but the menu should include a way to get
out to shell (if it does already, I apologize, but I did not see an option
for that in it).

 

After I did the node setup, and the pi rebooted, I'm getting odd errors from
trying to start Asterisk.  Here's an entry from journalctl:

 

Apr 11 16:14:33 uhf.wi0la.org systemd[1]: asterisk.service: Job
asterisk.service/start failed with result 'dependency'.

Apr 11 16:14:33 uhf.wi0la.org systemd[1]: dev-dahdi-pseudo.device: Job
dev-dahdi-pseudo.device/start failed with result 'timeout'.

 

I'm suspecting that the upgrade of the kernel I did on the first boot is
making Dahdi not come up properly, so I'm trying a rebuild of Dahdi via:

 

apt-get install --reinstall asl-dahdi-linux-dkms

 

Don't know if this will fix the problem or not - will know as soon as the
process finishes.  But isn't DKMS supposed to handle this automatically?

 

Jeremy, NQ0M

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180411/780fc896/attachment.html>

From dwaters5 at yahoo.com  Wed Apr 11 22:16:11 2018
From: dwaters5 at yahoo.com (David Waters)
Date: Wed, 11 Apr 2018 18:16:11 -0400
Subject: [App_rpt-users] streaming node issues
In-Reply-To: <a5c85e1d-3723-60f8-2882-f0d71c54bece@gmail.com>
References: <310364464.1695085.1523451524842.ref@mail.yahoo.com>
 <310364464.1695085.1523451524842@mail.yahoo.com>
 <9bb8a617-6abc-2294-3ccc-f4ee14d22345@bryanfields.net>
 <a5c85e1d-3723-60f8-2882-f0d71c54bece@gmail.com>
Message-ID: <32227F53-55EC-4AA0-BCAB-A3DDC22A9FD6@yahoo.com>

The line is typed exactly like it is on paper sent us from broadcastify. Like I dead it was working now it isn?t 
Not sure. What is wrong 
We have a space between the m m

David Waters

> On Apr 11, 2018, at 10:33 AM, Jeffrey Lehman, KC8QCH <kc8qch at gmail.com> wrote:
> 
> You are missing a space between the mm in the command. Try this one.
> 
> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status | /usr/bin/ezstream -qvc /etc/ezstream.xml
> 
> I know this one works because I just pulled it off our node that is running broadcastify. I added the ability to send the status to a file. I don't run that on our node, but this should still work.
> 
> Jeff, KC8QCH
> 
> 
>> On 4/11/2018 10:05, Bryan Fields wrote:
>>> On 4/11/18 8:58 AM, David Waters wrote:
>>> Bryanhere is what we have  this used to work but now it puts us into a
>>> sterad transmitt mode on our radio attached to node.  we have startup line
>>> commented out at present,
>>> 
>>> Command line to startstream: outstreamcmd=/bin/sh,-c,/usr/bin/lame
>>> 
>>> --preset cbr 16 -r -mm -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
>>> 
>>> /usr/bin/ezstream -qvc/etc/ezstream.xml
>> <snip>
>> 
>>> -bash: --preset:command not found
>> This is command from the shell saying it's trying to execute the one of the
>> flags to lame, rather than pass it to lame on the command line.
>> 
>> You have something wrong with your command, perhaps it's in quoted properly or
>> you have a CR/LF in it's place.
>> 
>> I've replied to the list so we all can benefit from this, and yahoo is not
>> allowing emails again.
>> 
> 
> -- 
> Jeff Lehman, KC8QCH
> https://kc8qch.ddns.net
> kc8qch at gmail.com
> 
> Webmaster
> Hamilton Couny ARPSC
> https://www.hamcoarpsc.org
> hamcoarpsc at gmail.com
> 
> AllStar 47374 Node Administrator
> World Wide Amateur Radio Guild
> https://theguildglobal.org
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From jerutley at gmail.com  Wed Apr 11 22:29:07 2018
From: jerutley at gmail.com (Jeremy Utley)
Date: Wed, 11 Apr 2018 17:29:07 -0500
Subject: [App_rpt-users] Problems with setup from newest image
In-Reply-To: <059d01d3d1de$13869b90$3a93d2b0$@gmail.com>
References: <059d01d3d1de$13869b90$3a93d2b0$@gmail.com>
Message-ID: <05e501d3d1e4$819d8890$84d899b0$@gmail.com>

Ok, so rebuilding the Dahdi drivers worked - but the process as shown in the
wiki did not work, nor did the -reinstall command - it looks like DKMS is by
default building things with -j 4, and that's too much for a Pi - my SSH
connection was getting killed during the Dahdi recompile.  So I had to
manually do it with this command:

 

dkms build -m asl-dahdi-linux -v 2.11.1 -j 1

dkms install -m asl-dahdi-linux -v 2.11.1 -j 1 -force

 

Once I'd done that, I could load up the dahdi kernel module, and asterisk
would start up.  It appears I am connected to the network with the new node
- however I'm having the following message spew into
/var/log/asterisk/messages multiple times a second:

 

[Apr 11 17:21:22] WARNING[1387] chan_simpleusb.c: Unable to re-open DSP
device 1 (usb_45984): No such file or directory

 

Anyone got any ideas?

 

Jeremy, NQ0M

 

From: Jeremy Utley <jerutley at gmail.com> 
Sent: Wednesday, April 11, 2018 4:43 PM
To: 'Users of Asterisk app_rpt' <app_rpt-users at lists.allstarlink.org>
Subject: Problems with setup from newest image

 

So last week while I was on vacation, I had an SD card filesystem go corrupt
- lots of damaged files, Asterisk segfaulting on startup, all kinds of weird
stuff happening.  So I decided to rebuild this node (45984) with the newest
stuff - this was my last Arch-based node, and I wanted to get back to the
Debian base.  So, I pulled down the 20180228 raspbian stretch image, wrote
it to a new SD card, booted up the Pi, ssh'd in, expanded the filesystem,
updated all packages to latest, and went thru the setup process.  BTW, I
love the new menu-based system - but the menu should include a way to get
out to shell (if it does already, I apologize, but I did not see an option
for that in it).

 

After I did the node setup, and the pi rebooted, I'm getting odd errors from
trying to start Asterisk.  Here's an entry from journalctl:

 

Apr 11 16:14:33 uhf.wi0la.org systemd[1]: asterisk.service: Job
asterisk.service/start failed with result 'dependency'.

Apr 11 16:14:33 uhf.wi0la.org systemd[1]: dev-dahdi-pseudo.device: Job
dev-dahdi-pseudo.device/start failed with result 'timeout'.

 

I'm suspecting that the upgrade of the kernel I did on the first boot is
making Dahdi not come up properly, so I'm trying a rebuild of Dahdi via:

 

apt-get install --reinstall asl-dahdi-linux-dkms

 

Don't know if this will fix the problem or not - will know as soon as the
process finishes.  But isn't DKMS supposed to handle this automatically?

 

Jeremy, NQ0M

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180411/d4900909/attachment.html>

From tisawyer at gmail.com  Thu Apr 12 02:14:30 2018
From: tisawyer at gmail.com (Tim Sawyer)
Date: Wed, 11 Apr 2018 19:14:30 -0700
Subject: [App_rpt-users] Static IP
In-Reply-To: <E3B99005-6DAF-4ECD-B009-E937DFFC1E85@n2yp.com>
References: <mailman.3.1523376001.11222.app_rpt-users@lists.allstarlink.org>
 <E3B99005-6DAF-4ECD-B009-E937DFFC1E85@n2yp.com>
Message-ID: <CAG3ht9vi_T0wCgx4gBs_c--MF+OnYT=1sV=_eSm_0m1EvfL3_w@mail.gmail.com>

Setting a static IP with the menus is broken for me as well. I googled and
found this which worked...
https://medium.com/@cpt_midnight/static-ip-in-debian-9-stretch-acb4e5cb7dc1

On Tue, Apr 10, 2018 at 11:58 AM, John Rudolph- N2YP <John at n2yp.com> wrote:

> I had some issues like this in the beginning as well but it included any
> changes made to my conf files and it ended up being because the image
> didn't install correctly because I was trying to reuse a DVD. With that
> said I do have everything working now except the menu for changing the
> system name and using the menu to install webmin. I have since installed it
> maunally after many attempts automatically.
>
>
> I should have been a bit clearer in describing my problem. I am trying to
> use the install menu asl-menu.I follow the menu prompts enter the info,
> highlight Save and hit ok . it seems to go but does not change, the same
> happens if i try to change the name from repeater to something else. All
> the install info Node number , my call and password entered ok, the box
> will connect and register but I am unable to change from DHCP to Static.I
> tried using both the root log i and the repeater log in from the console
> with the same results.
> ThanksCharlie WB2SNN
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180411/edc0eefc/attachment.html>

From jerutley at gmail.com  Thu Apr 12 03:49:19 2018
From: jerutley at gmail.com (Jeremy Utley)
Date: Wed, 11 Apr 2018 22:49:19 -0500
Subject: [App_rpt-users] Problems with setup from newest image
In-Reply-To: <05e501d3d1e4$819d8890$84d899b0$@gmail.com>
References: <059d01d3d1de$13869b90$3a93d2b0$@gmail.com>
 <05e501d3d1e4$819d8890$84d899b0$@gmail.com>
Message-ID: <CAOMfyjZPQ1guUeaq+JbKZ2SKcFYKQoSYy9A59-=kkZNtQ=6VQA@mail.gmail.com>

OK, so with the advice of someone who emailed me off list, I'm trying
out some things.  A power problem on the Pi I'm using for the rebuild
was suspected, so I've switched my Pi-3 over to my Anker 10-port USB
charger - capable of 60W output, 2.4 amps per port - This should be
plenty to drive the Pi.  I re-imaged the SD card from the same image I
had downloaded (ASL_1.01-20180228-armhf-raspbian-stretch-image.img),
and booted my Pi-3 with it.  Logged in over SSH, changed the password,
and did an apt update && apt -y upgrade to bring everything to the
newest packages.  While running the stock image, I got the following
output:

root at repeater:~# uname -a
Linux repeater 4.9.80-v7+ #1098 SMP Fri Mar 9 19:11:42 GMT 2018 armv7l GNU/Linux
root at repeater:~# lsmod | grep "^snd_pcm_oss"
snd_pcm_oss            39923  0
root at repeater:~# lsmod | grep "^dahdi"
dahdi                 229561  26

So with the stock image, kernel 4.9.80-v7+ is running, and both the
dahdi and snd_pcm_oss modules are loaded.

Rebooting after the apt upgrade, during the bootup, I get an error
about failing to load kernel modules.  SSH into the system, I end up
with a host key mismatch - so between the first and second bootups,
the SSH host keys are getting regenerated - this should happen during
the first bootup of the image, not the second :)  Delete the old host
keys from my system, and run those same commands again:

root at repeater:~# uname -a
Linux repeater 4.14.30-v7+ #1102 SMP Mon Mar 26 16:45:49 BST 2018
armv7l GNU/Linux

We are now running the new kernel for Raspbian.

root at repeater:~# lsmod | grep "^dahdi"
root at repeater:~#

No loaded dahdi kernel module, so DKMS is not doing it's jub to
rebuild the kernel module against the newer kernel.  Not sure why that
is.

root at repeater:~# lsmod | grep "^snd_pcm_oss"
root at repeater:~#

Also no snd_pcm_oss module being loaded.  I did a "modprobe configs"
to get the config of the current kernel into /proc/config.gz, and did:

root at repeater:/boot# zcat /proc/config.gz | grep -i "OSS"

And it looks like the Raspbian kernel is now disabling the OSS sound
modules entirely:

# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND_OSSEMUL is not set

So, from what I can see, we have 2 issues here.

1) DKMS is not rebuilding the dahdi module when the kernel is upgraded
to a new version.  This can be easily fixed with a "dkms install"
command, but shouldn't the system be doing that automatically?

2) It seems the newest Raspbian kernel has disabled the legacy OSS
support modules, which means /dev/dsp is not being created - and I
believe that is what was causing the message "Unable to re-open DSP
device 1" to constantly spew into my Asterisk logs earlier today.
Unfortunately, I don't see a way, short of providing a custom kernel
and maintaining that custom kernel, for this particular problem to be
solved, and from my understanding, this means that with the newer
Raspbian kernels, AllStar will not work - even if the Dahdi problems
are solved.

I don't know if this is the case on x86 - I haven't tested that out -
and I really don't want to put a full blown X86 box into our repeater
shed.  I'm not sure exactly where to go from here, other than disable
kernel updates, which IMHO isn't a smart thing to do.  Maybe I need to
work with the older RAT_RC1 image - it seemed to work great back when
I had it on my simplex node.

Anybody got any ideas?

Jeremy, NQ0M

On Wed, Apr 11, 2018 at 5:29 PM, Jeremy Utley <jerutley at gmail.com> wrote:
> Ok, so rebuilding the Dahdi drivers worked ? but the process as shown in the
> wiki did not work, nor did the ?reinstall command ? it looks like DKMS is by
> default building things with -j 4, and that?s too much for a Pi ? my SSH
> connection was getting killed during the Dahdi recompile.  So I had to
> manually do it with this command:
>
>
>
> dkms build -m asl-dahdi-linux -v 2.11.1 -j 1
>
> dkms install -m asl-dahdi-linux -v 2.11.1 -j 1 ?force
>
>
>
> Once I?d done that, I could load up the dahdi kernel module, and asterisk
> would start up.  It appears I am connected to the network with the new node
> ? however I?m having the following message spew into
> /var/log/asterisk/messages multiple times a second:
>
>
>
> [Apr 11 17:21:22] WARNING[1387] chan_simpleusb.c: Unable to re-open DSP
> device 1 (usb_45984): No such file or directory
>
>
>
> Anyone got any ideas?
>
>
>
> Jeremy, NQ0M
>
>
>
> From: Jeremy Utley <jerutley at gmail.com>
> Sent: Wednesday, April 11, 2018 4:43 PM
> To: 'Users of Asterisk app_rpt' <app_rpt-users at lists.allstarlink.org>
> Subject: Problems with setup from newest image
>
>
>
> So last week while I was on vacation, I had an SD card filesystem go corrupt
> ? lots of damaged files, Asterisk segfaulting on startup, all kinds of weird
> stuff happening.  So I decided to rebuild this node (45984) with the newest
> stuff ? this was my last Arch-based node, and I wanted to get back to the
> Debian base.  So, I pulled down the 20180228 raspbian stretch image, wrote
> it to a new SD card, booted up the Pi, ssh?d in, expanded the filesystem,
> updated all packages to latest, and went thru the setup process.  BTW, I
> love the new menu-based system ? but the menu should include a way to get
> out to shell (if it does already, I apologize, but I did not see an option
> for that in it).
>
>
>
> After I did the node setup, and the pi rebooted, I?m getting odd errors from
> trying to start Asterisk.  Here?s an entry from journalctl:
>
>
>
> Apr 11 16:14:33 uhf.wi0la.org systemd[1]: asterisk.service: Job
> asterisk.service/start failed with result 'dependency'.
>
> Apr 11 16:14:33 uhf.wi0la.org systemd[1]: dev-dahdi-pseudo.device: Job
> dev-dahdi-pseudo.device/start failed with result 'timeout'.
>
>
>
> I?m suspecting that the upgrade of the kernel I did on the first boot is
> making Dahdi not come up properly, so I?m trying a rebuild of Dahdi via:
>
>
>
> apt-get install --reinstall asl-dahdi-linux-dkms
>
>
>
> Don?t know if this will fix the problem or not ? will know as soon as the
> process finishes.  But isn?t DKMS supposed to handle this automatically?
>
>
>
> Jeremy, NQ0M


From app_rpt at marrold.co.uk  Thu Apr 12 15:03:57 2018
From: app_rpt at marrold.co.uk (2E0SIP)
Date: Thu, 12 Apr 2018 16:03:57 +0100
Subject: [App_rpt-users] Connect multiple SIP or IAX clients to a node
Message-ID: <CAC-Lcd-cfzruYa+jsnUsWQPGuN0E2isD=rFR82RD6G+pe5niCQ@mail.gmail.com>

Hi All

I currently have an issue where by if a SIP client has 'dialled' into a
node and another SIP client then dials in, the first call is terminated
with a BYE.

The logs, even with full debugging enabled, don't really reveal why this is
occurring.

Someone else in a Facebook group reported the same issue with an IAX client.

Here's the context the SIP clients get dropped into:

[sip-client]
exten => ${NODE},1,Answer
exten => ${NODE},n,Set(NODENUM=${CALLERID(number)})
exten => ${NODE},n,Set(CALLERID(num)=0)
exten => ${NODE},n,Rpt,${NODE}|Pv|${CALLERID(name)}
exten => ${NODE},n,Hangup
exten => ${NODE},n(hangit),Answer
exten => ${NODE},n(hangit),Wait(1)
exten => ${NODE},n(hangit),Hangup


Does anyone have any idea why this can only support a single connected
client?


Thanks

Matthew
2E0SIP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180412/987c9ed8/attachment.html>

From Bryan at bryanfields.net  Thu Apr 12 20:36:22 2018
From: Bryan at bryanfields.net (Bryan Fields)
Date: Thu, 12 Apr 2018 16:36:22 -0400
Subject: [App_rpt-users] Connect multiple SIP or IAX clients to a node
In-Reply-To: <CAC-Lcd-cfzruYa+jsnUsWQPGuN0E2isD=rFR82RD6G+pe5niCQ@mail.gmail.com>
References: <CAC-Lcd-cfzruYa+jsnUsWQPGuN0E2isD=rFR82RD6G+pe5niCQ@mail.gmail.com>
Message-ID: <accc77e5-5808-60ce-11bc-1898cbe6fe9b@bryanfields.net>

On 4/12/18 11:03 AM, 2E0SIP wrote:
> Hi All
> 
> I currently have an issue where by if a SIP client has 'dialled' into a node
> and another SIP client then dials in, the first call is terminated with a BYE. 

I don't run a SIP client into my nodes, but this should work.

Question, is there NAT involved?

What's your sip.conf look like?

> The logs, even with full debugging enabled, don't really reveal why this is
> occurring.
> 
> Someone else in a Facebook group reported the same issue with an IAX client.

IAX is totally different.  Post the details as a new thread on this list.

> 
> Here's the context the SIP clients get dropped into:
> 
> [sip-client]
> exten => ${NODE},1,Answer
> exten => ${NODE},n,Set(NODENUM=${CALLERID(number)})
> exten => ${NODE},n,Set(CALLERID(num)=0)
> exten => ${NODE},n,Rpt,${NODE}|Pv|${CALLERID(name)}
> exten => ${NODE},n,Hangup
> exten => ${NODE},n(hangit),Answer
> exten => ${NODE},n(hangit),Wait(1)
> exten => ${NODE},n(hangit),Hangup

Looks ok, and it should support concurrency.


-- 
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net


From app_rpt at marrold.co.uk  Thu Apr 12 21:14:28 2018
From: app_rpt at marrold.co.uk (2E0SIP)
Date: Thu, 12 Apr 2018 22:14:28 +0100
Subject: [App_rpt-users] Connect multiple SIP or IAX clients to a node
In-Reply-To: <accc77e5-5808-60ce-11bc-1898cbe6fe9b@bryanfields.net>
References: <CAC-Lcd-cfzruYa+jsnUsWQPGuN0E2isD=rFR82RD6G+pe5niCQ@mail.gmail.com>
 <accc77e5-5808-60ce-11bc-1898cbe6fe9b@bryanfields.net>
Message-ID: <CAC-Lcd_0ABTEmbTcEopkHaVhaZVBpgV=DY3QAifvWzb6DTyYvg@mail.gmail.com>

Hi Bryan,

Thanks for the response. Here's the relevant section of sip.conf:

[sip-client]
type = peer
context = sip-client
host = 127.0.0.1
insecure=very
disallow = all
allow = ulaw
allow = alaw
allow = gsm
transfer = no

[audio-bridge]
type = peer
context = sip-client
host = 217.163.11.214
insecure=very
disallow = all
allow = ulaw
allow = alaw
allow = gsm
transfer = no

There is no NAT in between the client and AllStar Asterisk Node

Thanks

Matthew
2E0SIP

On Thu, Apr 12, 2018 at 9:36 PM, Bryan Fields <Bryan at bryanfields.net> wrote:

> On 4/12/18 11:03 AM, 2E0SIP wrote:
> > Hi All
> >
> > I currently have an issue where by if a SIP client has 'dialled' into a
> node
> > and another SIP client then dials in, the first call is terminated with
> a BYE.
>
> I don't run a SIP client into my nodes, but this should work.
>
> Question, is there NAT involved?
>
> What's your sip.conf look like?
>
> > The logs, even with full debugging enabled, don't really reveal why this
> is
> > occurring.
> >
> > Someone else in a Facebook group reported the same issue with an IAX
> client.
>
> IAX is totally different.  Post the details as a new thread on this list.
>
> >
> > Here's the context the SIP clients get dropped into:
> >
> > [sip-client]
> > exten => ${NODE},1,Answer
> > exten => ${NODE},n,Set(NODENUM=${CALLERID(number)})
> > exten => ${NODE},n,Set(CALLERID(num)=0)
> > exten => ${NODE},n,Rpt,${NODE}|Pv|${CALLERID(name)}
> > exten => ${NODE},n,Hangup
> > exten => ${NODE},n(hangit),Answer
> > exten => ${NODE},n(hangit),Wait(1)
> > exten => ${NODE},n(hangit),Hangup
>
> Looks ok, and it should support concurrency.
>
>
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180412/2c832363/attachment.html>

From ky1u at gmx.com  Fri Apr 13 14:20:03 2018
From: ky1u at gmx.com (Greg)
Date: Fri, 13 Apr 2018 10:20:03 -0400
Subject: [App_rpt-users] Repeater settings questions...
Message-ID: <5a516d8f-c9c8-0123-31dd-5c5dd75c7ea0@gmx.com>

I just set up Allstar as repeater controller for the 1st time. I have 
done a few simplex setups. I have some questions..

Why does the courtesy tone follow the hangtime? Shouldn't it come after 
the station unkeys?

Is the cwid speed capped at 20WPM? I know the rules about it but if I 
try setting higher, nothing changes..

Other than that, all makes sense and seems to perform well..

Greg



From ky1u at gmx.com  Fri Apr 13 14:25:46 2018
From: ky1u at gmx.com (Greg)
Date: Fri, 13 Apr 2018 10:25:46 -0400
Subject: [App_rpt-users] Another question
Message-ID: <1449469f-f311-7944-f09a-737b40d86303@gmx.com>

If I use usbradio driver and send ctcss, will CW id be played with or 
without ctcss? Can it be changed somewhere?

Greg



From kc8qch at gmail.com  Fri Apr 13 14:34:12 2018
From: kc8qch at gmail.com (Jeffrey Lehman, KC8QCH)
Date: Fri, 13 Apr 2018 10:34:12 -0400
Subject: [App_rpt-users] Send text Commands to Echolink
Message-ID: <7e233af8-9cf1-dce2-6134-151ace7bbca9@gmail.com>

HI all,

 ?????? This may have been asked before and may be a silly question, but 
is it possible to send text commands to Echolink? I have an Allstar Node 
that connects to an Echolink conference fulltime. Is there a way to send 
conference command to the conference from the allstar node? Or am I just 
dreaming which is possible too.

 ?????? thanks :)

 ????????? Jeff

-- 
Jeff Lehman, KC8QCH
https://kc8qch.ddns.net
kc8qch at gmail.com

Webmaster
Hamilton County ARPSC
https://www.hamcoarpsc.org
hamcoarpsc at gmail.com

AllStar 47374 Node Administrator
World Wide Amateur Radio Guild
https://theguildglobal.org



From jd0 at broadsci.com  Fri Apr 13 16:40:39 2018
From: jd0 at broadsci.com (Jeff DePolo)
Date: Fri, 13 Apr 2018 12:40:39 -0400
Subject: [App_rpt-users] Repeater settings questions...
In-Reply-To: <5a516d8f-c9c8-0123-31dd-5c5dd75c7ea0@gmx.com>
References: <5a516d8f-c9c8-0123-31dd-5c5dd75c7ea0@gmx.com>
Message-ID: <FAC8142F78874BE49D47AF50DBE814CF@OUTLAW>

> Why does the courtesy tone follow the hangtime? 

It doesn't.

> Shouldn't it come after the station unkeys?

It does.

unkeywait in [wait-times] is the delay before the courtesy tone

http://wiki.allstarlink.org/wiki/Rpt.conf#Wait_Times_Stanza

hangtime and althangtime in the node section controls the hang time.  You
can switch between regular and alt hang times via COP command if desired.

http://wiki.allstarlink.org/wiki/Rpt.conf#hangtime.3D

> Is the cwid speed capped at 20WPM? 

Yes.  

					--- Jeff WN3A



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



From John at n2yp.com  Sat Apr 14 01:53:05 2018
From: John at n2yp.com (John Rudolph- N2YP)
Date: Fri, 13 Apr 2018 21:53:05 -0400
Subject: [App_rpt-users] Node locks into tx on link connect.
Message-ID: <442E74DB-4A9F-4411-8AFD-88CA45A776BE@n2yp.com>

I have a multi node x86 system running All Star Link 1.01. I setup 3 node on the system 46100 and 46101 which are full duplex repeaters and 46111 which is a remote base. When I add 46110 which is another remote base and copy the stanzas for 46111  into the conf files as soon as I connect 46110 to another node it keeps any node it's connected to keyed up. 46111 works perfectly fine when connected to other nodes on the system. I've tried watching the messages in Asterisk and I can't find anything causing this. I've redone the files numerous times, rebooted, swapped URI's, unplugged the radios, swapped USB cables, changed USB ports and it still does this and the issue stays on node 46110. All the devices are hooked into the computer direct with no hubs. I had this happen on DIAL too but then decided to upgrade to ASL 1.01 and rebuilt the original files that came with ASL 1.01 because my old files would cause this even when swapping them into ALS 1.01.
John Rudolph
Amateur Radio Op N2YP
Unadilla,NY
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180413/12e2912c/attachment.html>

From w8khw1 at gmail.com  Sat Apr 14 02:36:16 2018
From: w8khw1 at gmail.com (Kevin Walsh)
Date: Fri, 13 Apr 2018 22:36:16 -0400
Subject: [App_rpt-users] Mixed technology RTCM voting
Message-ID: <2A5D6327-872E-4CBF-A164-D9B9C7A8F03E@gmail.com>

Greetings,

A local conventional repeater is using an RVS-8 voter on the receive side, connected to a typical repeater controller. All 8 ports are in use, which  restricts further expansion. I would like to suggest moving to RTCM voting, but that would obviously take time (and money). I am wondering if anyone has ever taken the output of a conventional voter such as the RVS-8 and connected it to an RTCM to act as the central site, then converted receive sites one at a time to RTCM voting?

This would allow the repeater system to continue operation with RF links, allow for conversion to RTCM voting one site at a time (making sure stable internet connectivity exists), wouldn?t bust the budget all at once and allow for testing of additional receive sites and their effectiveness in the system.

Anybody ever try something like this?

Thanks and 73,

Kevin 
W8KHW 

From kevin.babich at gmail.com  Sat Apr 14 03:00:45 2018
From: kevin.babich at gmail.com (Kevin Babich)
Date: Fri, 13 Apr 2018 22:00:45 -0500
Subject: [App_rpt-users] Mixed technology RTCM voting
In-Reply-To: <2A5D6327-872E-4CBF-A164-D9B9C7A8F03E@gmail.com>
References: <2A5D6327-872E-4CBF-A164-D9B9C7A8F03E@gmail.com>
Message-ID: <7FE406A8-A28E-45FC-B29C-CF1196E8CA96@gmail.com>

I can offer some input, I?m available anytime for a call. 

Kevin J. Babich

219.406.9707 Mobile
 
***Mobile EMail***

Please excuse any typos and brevity. 

> On Apr 13, 2018, at 9:36 PM, Kevin Walsh <w8khw1 at gmail.com> wrote:
> 
> Greetings,
> 
> A local conventional repeater is using an RVS-8 voter on the receive side, connected to a typical repeater controller. All 8 ports are in use, which  restricts further expansion. I would like to suggest moving to RTCM voting, but that would obviously take time (and money). I am wondering if anyone has ever taken the output of a conventional voter such as the RVS-8 and connected it to an RTCM to act as the central site, then converted receive sites one at a time to RTCM voting?
> 
> This would allow the repeater system to continue operation with RF links, allow for conversion to RTCM voting one site at a time (making sure stable internet connectivity exists), wouldn?t bust the budget all at once and allow for testing of additional receive sites and their effectiveness in the system.
> 
> Anybody ever try something like this?
> 
> Thanks and 73,
> 
> Kevin 
> W8KHW 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From tisawyer at gmail.com  Sat Apr 14 03:57:03 2018
From: tisawyer at gmail.com (Tim Sawyer)
Date: Fri, 13 Apr 2018 20:57:03 -0700
Subject: [App_rpt-users] Mixed technology RTCM voting
In-Reply-To: <7FE406A8-A28E-45FC-B29C-CF1196E8CA96@gmail.com>
References: <2A5D6327-872E-4CBF-A164-D9B9C7A8F03E@gmail.com>
 <7FE406A8-A28E-45FC-B29C-CF1196E8CA96@gmail.com>
Message-ID: <CAG3ht9vya5dVa2iE674gCGn0BTevL440nML1frkEUY5u7L2WHA@mail.gmail.com>

That could work. The issue is going to be the delay the RTCMs introduce
into the system. I think the RVS-8 voter output would have to look like
discriminator audio and feed the RTCM RX. The transmitter (assuming only
one) would have to move from the voter output to the RTCM TX.

Kevin knows this stuff, I'm sure he can help. I'm here too if needed.

On Fri, Apr 13, 2018 at 8:00 PM, Kevin Babich <kevin.babich at gmail.com>
wrote:

> I can offer some input, I?m available anytime for a call.
>
> Kevin J. Babich
>
> 219.406.9707 Mobile
>
> ***Mobile EMail***
>
> Please excuse any typos and brevity.
>
> > On Apr 13, 2018, at 9:36 PM, Kevin Walsh <w8khw1 at gmail.com> wrote:
> >
> > Greetings,
> >
> > A local conventional repeater is using an RVS-8 voter on the receive
> side, connected to a typical repeater controller. All 8 ports are in use,
> which  restricts further expansion. I would like to suggest moving to RTCM
> voting, but that would obviously take time (and money). I am wondering if
> anyone has ever taken the output of a conventional voter such as the RVS-8
> and connected it to an RTCM to act as the central site, then converted
> receive sites one at a time to RTCM voting?
> >
> > This would allow the repeater system to continue operation with RF
> links, allow for conversion to RTCM voting one site at a time (making sure
> stable internet connectivity exists), wouldn?t bust the budget all at once
> and allow for testing of additional receive sites and their effectiveness
> in the system.
> >
> > Anybody ever try something like this?
> >
> > Thanks and 73,
> >
> > Kevin
> > W8KHW
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180413/145894c5/attachment.html>

From nhardman1428 at gmail.com  Sat Apr 14 13:42:42 2018
From: nhardman1428 at gmail.com (nhardman1428 at gmail.com)
Date: Sat, 14 Apr 2018 09:42:42 -0400
Subject: [App_rpt-users] Mixed technology RTCM voting
In-Reply-To: <2A5D6327-872E-4CBF-A164-D9B9C7A8F03E@gmail.com>
References: <2A5D6327-872E-4CBF-A164-D9B9C7A8F03E@gmail.com>
Message-ID: <B4C8A9D9-BC15-4634-905F-404C2A4B7FEC@gmail.com>

Yes, currently on two separate repeaters. One using an RVS8 and the other a Doug Hall with 8 ports. The output of the voter into an RTCM and feeding the TX from the RTCM at the main site.   Yes it does require discriminator audio from the voter. 

Questions feel free to email me. 

Sent from my iPhone

> On Apr 13, 2018, at 10:36 PM, Kevin Walsh <w8khw1 at gmail.com> wrote:
> 
> Greetings,
> 
> A local conventional repeater is using an RVS-8 voter on the receive side, connected to a typical repeater controller. All 8 ports are in use, which  restricts further expansion. I would like to suggest moving to RTCM voting, but that would obviously take time (and money). I am wondering if anyone has ever taken the output of a conventional voter such as the RVS-8 and connected it to an RTCM to act as the central site, then converted receive sites one at a time to RTCM voting?
> 
> This would allow the repeater system to continue operation with RF links, allow for conversion to RTCM voting one site at a time (making sure stable internet connectivity exists), wouldn?t bust the budget all at once and allow for testing of additional receive sites and their effectiveness in the system.
> 
> Anybody ever try something like this?
> 
> Thanks and 73,
> 
> Kevin 
> W8KHW 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From dragonlord at hawaiitel.net  Sat Apr 14 21:31:06 2018
From: dragonlord at hawaiitel.net (Wayne)
Date: Sat, 14 Apr 2018 11:31:06 -1000
Subject: [App_rpt-users] ASL version
Message-ID: <eb0c909a-eccd-ae9e-f1cf-bbb3fccaab70@hawaiitel.net>

hi all,

recently downloaded and installed the newer ASL version from 
allstarlink.org.? it sets up nicely however, an issue i'm missing 
something is, I have two nodes running on it i can connect out to other 
nodes but cannot connect internally between the nodes on the same 
server.? everything looks right but it gives me "call rejected by 
127.0.0.1, no such context/extension".

been through the extension.conf several times and can't see what's missing.

anyone else seen this before...thanks




From szingman at msgstor.com  Sat Apr 14 21:58:08 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Sat, 14 Apr 2018 17:58:08 -0400
Subject: [App_rpt-users] ASL version
In-Reply-To: <eb0c909a-eccd-ae9e-f1cf-bbb3fccaab70@hawaiitel.net>
References: <eb0c909a-eccd-ae9e-f1cf-bbb3fccaab70@hawaiitel.net>
Message-ID: <84769503-b5a5-f9a6-c91d-c1508bdc5438@msgstor.com>

Please post the section of extensions and do you have both nodes in the 
[nodes] section of rpt.conf

On 04/14/2018 05:31 PM, Wayne wrote:
> hi all,
>
> recently downloaded and installed the newer ASL version from 
> allstarlink.org.? it sets up nicely however, an issue i'm missing 
> something is, I have two nodes running on it i can connect out to 
> other nodes but cannot connect internally between the nodes on the 
> same server.? everything looks right but it gives me "call rejected by 
> 127.0.0.1, no such context/extension".
>
> been through the extension.conf several times and can't see what's 
> missing.
>
> anyone else seen this before...thanks
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem. 



From loren at lorentedford.com  Mon Apr 16 17:05:55 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Mon, 16 Apr 2018 12:05:55 -0500
Subject: [App_rpt-users] Raspberry Pi installing fresh.
Message-ID: <20180416170555.640C31E28C1@morty.keekles.org>

Hello trying to help another ham operator with Allstarlink and for some reason the current raspberry pi version doesn?t seem to wan to cooperate.. I noticed asterisk is not running in the background I tried force starting with.
Service asterisk start
It hangs and does not start.. I have also gone through the configs changing node number and information to match the Allstarlink account..

Continued issues with this..



Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180416/797300da/attachment.html>

From szingman at msgstor.com  Mon Apr 16 17:15:42 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Mon, 16 Apr 2018 13:15:42 -0400
Subject: [App_rpt-users] Raspberry Pi installing fresh.
In-Reply-To: <20180416170555.640C31E28C1@morty.keekles.org>
References: <20180416170555.640C31E28C1@morty.keekles.org>
Message-ID: <156b91d4-f999-e2b1-76eb-be9984e1f554@msgstor.com>

 From a fresh install of AllStarLink 1.01
After you have logged in as repeater:

apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel
apt-get update
apt-get upgrade

Steve N4IRS

On 04/16/2018 01:05 PM, Loren Tedford wrote:
>
> Hello trying to help another ham operator with Allstarlink and for 
> some reason the current raspberry pi version doesn?t seem to wan to 
> cooperate.. I noticed asterisk is not running in the background I 
> tried force starting with.
>
> Service asterisk start
>
> It hangs and does not start.. I have also gone through the configs 
> changing node number and information to match the Allstarlink account..
>
> Continued issues with this..
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180416/61da37d6/attachment.html>

From stanstahlman at yahoo.com  Mon Apr 16 17:29:20 2018
From: stanstahlman at yahoo.com (Stanley Stahlman)
Date: Mon, 16 Apr 2018 12:29:20 -0500
Subject: [App_rpt-users] Raspberry Pi installing fresh.
In-Reply-To: <156b91d4-f999-e2b1-76eb-be9984e1f554@msgstor.com>
Message-ID: <78805207-ee34-4ef9-9b11-b07ee5cc0cdc@email.android.com>

An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180416/9919f537/attachment.html>

From kevin.babich at gmail.com  Tue Apr 17 04:33:11 2018
From: kevin.babich at gmail.com (Kevin Babich)
Date: Mon, 16 Apr 2018 23:33:11 -0500
Subject: [App_rpt-users] Thru-hole VOTER / RTCM
Message-ID: <022a01d3d605$31eb4880$95c1d980$@gmail.com>

All,

 

I am looking to purchase a completed and working original thru-hole VOTER /
RTCM for testing. does anyone have one available for purchase?  

 

Kindest Regards,

 

Kevin Babich | N9IAA

Valparaiso, IN 46383

 

Mobile: 219.406.9707

 

Cessna 421

Cesssna Conquest I/II

Beechcraft King Air 90/200

 

".It is not the critic who counts; not the man who points out how the strong
man stumbles, or where the doer of deeds could have done them better. The
credit belongs to the man who is actually in the arena, whose face is marred
by dust and sweat and blood; who strives valiantly; who errs, who comes
short again and again, because there is no effort without error and
shortcoming; but who does actually strive to do the deeds; who knows great
enthusiasms, the great devotions; who spends himself in a worthy cause; who
at the best knows in the end the triumph of high achievement, and who at the
worst, if he fails, at least fails while daring greatly, so that his place
shall never be with those cold and timid souls who neither know victory nor
defeat..."  -Theodore Roosevelt

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180416/621e99dd/attachment.html>

From jldharma at gmail.com  Tue Apr 17 14:05:19 2018
From: jldharma at gmail.com (John Locke)
Date: Tue, 17 Apr 2018 11:05:19 -0300
Subject: [App_rpt-users] Very strange problem with DIAL + USB URIs.
Message-ID: <CACaxzOgDtb3LKFOwq5WM-YA_4XZFu-aA5y8jD-wiLp7bchtdoA@mail.gmail.com>

Hi,
I have a very strange problem with DIAL + USB URIs.
I get choppy audio after a couple of days or maybe several hours of
constant use.
Restarting asterisk or even the PC wont solve the problem.
The problem only goes away if I connect the URI to another USB or shut down
the PC for several hours.
Maybe some temperature problem on the USB card??

I'm using a standard PC (i5 + 8GB) with 2 USB URIs.
To test the problem I connected a tone generator to the URIs.
These are some examples of the saved audio files in asterisk:

Normal

After several hours




after one day



Some advice would be very appreciated
Thanks in advance
Best Regards
John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/d99f9ea0/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 13211 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/d99f9ea0/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 5865 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/d99f9ea0/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 7632 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/d99f9ea0/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 15456 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/d99f9ea0/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 14702 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/d99f9ea0/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 16173 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/d99f9ea0/attachment-0005.png>

From k5cg at hamoperator.org  Tue Apr 17 17:33:27 2018
From: k5cg at hamoperator.org (K5CG)
Date: Tue, 17 Apr 2018 10:33:27 -0700 (PDT)
Subject: [App_rpt-users] Link audio level
Message-ID: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>

I'm trying to lower the audio level from the link to my RF repeater and I'm not seeing the linkmongain setting making a lick of difference. 

I have tried -6, -10, -20 and now have... 

linkmongain=-999 

...in the node section below Audio level settings and above Dial Plan settings but there is no change. I wold expect this value to mute it completely on my transmitter audio. 

http://docs.allstarlink.org/drupal/node/71 

Asterisk 1.4.23-pre.hamvoip-V1.5.3-28- app_rpt-0.327 -04/05/2018 (should be OK, right?) 

Linux allstar 4.4.44-1-ARCH #1 SMP Mon Jan 23 19:01:18 MST 2017 armv7l GNU/Linux 

What have I done incorrectly? 

Thanks 

Danny 
K5CG 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/d19a418c/attachment.html>

From Bryan at bryanfields.net  Tue Apr 17 17:52:05 2018
From: Bryan at bryanfields.net (Bryan Fields)
Date: Tue, 17 Apr 2018 13:52:05 -0400
Subject: [App_rpt-users] Link audio level
In-Reply-To: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
References: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
Message-ID: <9f73fad3-ad49-8dbc-1d69-38fce3596347@bryanfields.net>

On 4/17/18 1:33 PM, K5CG wrote:
> Asterisk 1.4.23-pre.hamvoip-V1.5.3-28-*app_rpt-0.327*-04/05/2018 (should be
> OK, right?)

HamVoIP is not Allstar, and they do not make their source available.  This is
illegal and and an attack on our community values.  It's rather sad, I'm sure
Jim would be spinning in his grave over this.

The people behind HamVoIP are actively involved in copyright infringement and
are stealing from the community.  They have made many changes that break
things (channel drivers, etc) in non-standard ways.  As it's closed source
they could be embedding anything (bitcoin miners, bots, etc.) and you'd never
be the wiser.

Allstar is based on sharing and writing code that benefits all of the
community, and when a group violates that it's an affront to the entire user base.

Install the Allstar code, either from source or via apt-get and give it a try.
 If your still seeing issues please report back, the developers are here :)

73's
-- 
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net


From ars.w5omr at gmail.com  Tue Apr 17 18:03:06 2018
From: ars.w5omr at gmail.com (ARS W5OMR)
Date: Tue, 17 Apr 2018 18:03:06 +0000
Subject: [App_rpt-users] Link audio level
In-Reply-To: <9f73fad3-ad49-8dbc-1d69-38fce3596347@bryanfields.net>
References: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
 <9f73fad3-ad49-8dbc-1d69-38fce3596347@bryanfields.net>
Message-ID: <CAOhDOk3P+ghmQZx9XiK2Lr6S3MDk=Tm-02GV1nPksQUpEW+Hfg@mail.gmail.com>

Recently, I asked a question about dial on a rpi3 .
Compton replied, off list.
I told him to jump straight my ass ...
Again.
The first time, I lost write access on the other list. I couldn't even
unsubscribe.

There's something unstable about that guy.


On Tue, Apr 17, 2018, 12:52 Bryan Fields <Bryan at bryanfields.net> wrote:

> On 4/17/18 1:33 PM, K5CG wrote:
> > Asterisk 1.4.23-pre.hamvoip-V1.5.3-28-*app_rpt-0.327*-04/05/2018 (should
> be
> > OK, right?)
>
> HamVoIP is not Allstar, and they do not make their source available.  This
> is
> illegal and and an attack on our community values.  It's rather sad, I'm
> sure
> Jim would be spinning in his grave over this.
>
> The people behind HamVoIP are actively involved in copyright infringement
> and
> are stealing from the community.  They have made many changes that break
> things (channel drivers, etc) in non-standard ways.  As it's closed source
> they could be embedding anything (bitcoin miners, bots, etc.) and you'd
> never
> be the wiser.
>
> Allstar is based on sharing and writing code that benefits all of the
> community, and when a group violates that it's an affront to the entire
> user base.
>
> Install the Allstar code, either from source or via apt-get and give it a
> try.
>  If your still seeing issues please report back, the developers are here :)
>
> 73's
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/7722d51d/attachment.html>

From szingman at msgstor.com  Tue Apr 17 18:06:41 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Tue, 17 Apr 2018 14:06:41 -0400
Subject: [App_rpt-users] Link audio level
In-Reply-To: <CAOhDOk3P+ghmQZx9XiK2Lr6S3MDk=Tm-02GV1nPksQUpEW+Hfg@mail.gmail.com>
References: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
 <9f73fad3-ad49-8dbc-1d69-38fce3596347@bryanfields.net>
 <CAOhDOk3P+ghmQZx9XiK2Lr6S3MDk=Tm-02GV1nPksQUpEW+Hfg@mail.gmail.com>
Message-ID: <18a6545d-7302-fd1d-a62a-edfd6040fd31@msgstor.com>

Yes,
We are getting reports of Dougie doing this type of thing more and more. 
Sorry that the users have to be subjected to such antics.

73, Steve N4IRS

On 4/17/2018 2:03 PM, ARS W5OMR wrote:
> Recently, I asked a question about dial on a rpi3 .
> Compton replied, off list.
> I told him to jump straight my ass ...
> Again.
> The first time, I lost write access on the other list. I couldn't even 
> unsubscribe.
>
> There's something unstable about that guy.
>
>
> On Tue, Apr 17, 2018, 12:52 Bryan Fields <Bryan at bryanfields.net 
> <mailto:Bryan at bryanfields.net>> wrote:
>
>     On 4/17/18 1:33 PM, K5CG wrote:
>     > Asterisk 1.4.23-pre.hamvoip-V1.5.3-28-*app_rpt-0.327*-04/05/2018
>     (should be
>     > OK, right?)
>
>     HamVoIP is not Allstar, and they do not make their source
>     available.? This is
>     illegal and and an attack on our community values.? It's rather
>     sad, I'm sure
>     Jim would be spinning in his grave over this.
>
>     The people behind HamVoIP are actively involved in copyright
>     infringement and
>     are stealing from the community.? They have made many changes that
>     break
>     things (channel drivers, etc) in non-standard ways.? As it's
>     closed source
>     they could be embedding anything (bitcoin miners, bots, etc.) and
>     you'd never
>     be the wiser.
>
>     Allstar is based on sharing and writing code that benefits all of the
>     community, and when a group violates that it's an affront to the
>     entire user base.
>
>     Install the Allstar code, either from source or via apt-get and
>     give it a try.
>     ?If your still seeing issues please report back, the developers
>     are here :)
>
>     73's
>     -- 
>     Bryan Fields
>
>     727-409-1194 - Voice
>     http://bryanfields.net
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem. 
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/e0139488/attachment.html>

From kuggie at kuggie.com  Tue Apr 17 18:32:46 2018
From: kuggie at kuggie.com (Kevin Custer)
Date: Tue, 17 Apr 2018 14:32:46 -0400
Subject: [App_rpt-users] Link audio level
In-Reply-To: <18a6545d-7302-fd1d-a62a-edfd6040fd31@msgstor.com>
References: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
 <9f73fad3-ad49-8dbc-1d69-38fce3596347@bryanfields.net>
 <CAOhDOk3P+ghmQZx9XiK2Lr6S3MDk=Tm-02GV1nPksQUpEW+Hfg@mail.gmail.com>
 <18a6545d-7302-fd1d-a62a-edfd6040fd31@msgstor.com>
Message-ID: <3198f4bc-8f04-a48b-8e80-b8bac63dce6b@kuggie.com>

I recently had a discussion with David Cameron about a simulcast and 
voting project.? While talking to him, I asked if he had reconsidered 
his decision to disallow IRLP support in app_rpt.? In no uncertain terms 
has he changed his mind.? He doesn't want that code in Asterisk/app_rpt 
- - period.

HamVoip includes code that goes against the creator of IRLP, but it 
doesn't seem to matter what other people think/want.? They are doing 
their own thing - for better or worse.

While the "official" distribution of AllStar/Asterisk/app_rpt has not 
kept up with the times - times have changed.

Kevin W3KKC



On 4/17/2018 2:06 PM, Steve Zingman wrote:
> Yes,
> We are getting reports of Dougie doing this type of thing more and 
> more. Sorry that the users have to be subjected to such antics.
>
> 73, Steve N4IRS
>
> On 4/17/2018 2:03 PM, ARS W5OMR wrote:
>> Recently, I asked a question about dial on a rpi3 .
>> Compton replied, off list.
>> I told him to jump straight my ass ...
>> Again.
>> The first time, I lost write access on the other list. I couldn't 
>> even unsubscribe.
>>
>> There's something unstable about that guy.
>>
>>
>> On Tue, Apr 17, 2018, 12:52 Bryan Fields <Bryan at bryanfields.net 
>> <mailto:Bryan at bryanfields.net>> wrote:
>>
>>     On 4/17/18 1:33 PM, K5CG wrote:
>>     > Asterisk
>>     1.4.23-pre.hamvoip-V1.5.3-28-*app_rpt-0.327*-04/05/2018 (should be
>>     > OK, right?)
>>
>>     HamVoIP is not Allstar, and they do not make their source
>>     available.? This is
>>     illegal and and an attack on our community values.? It's rather
>>     sad, I'm sure
>>     Jim would be spinning in his grave over this.
>>
>>     The people behind HamVoIP are actively involved in copyright
>>     infringement and
>>     are stealing from the community.? They have made many changes
>>     that break
>>     things (channel drivers, etc) in non-standard ways.? As it's
>>     closed source
>>     they could be embedding anything (bitcoin miners, bots, etc.) and
>>     you'd never
>>     be the wiser.
>>
>>     Allstar is based on sharing and writing code that benefits all of the
>>     community, and when a group violates that it's an affront to the
>>     entire user base.
>>
>>     Install the Allstar code, either from source or via apt-get and
>>     give it a try.
>>     ?If your still seeing issues please report back, the developers
>>     are here :)
>>
>>     73's
>>     -- 
>>     Bryan Fields
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/c70b8522/attachment.html>

From k6ecm1 at gmail.com  Tue Apr 17 18:48:22 2018
From: k6ecm1 at gmail.com (Bob Pyke)
Date: Tue, 17 Apr 2018 11:48:22 -0700
Subject: [App_rpt-users] Very strange problem with DIAL + USB URIs.
In-Reply-To: <CACaxzOgDtb3LKFOwq5WM-YA_4XZFu-aA5y8jD-wiLp7bchtdoA@mail.gmail.com>
References: <CACaxzOgDtb3LKFOwq5WM-YA_4XZFu-aA5y8jD-wiLp7bchtdoA@mail.gmail.com>
Message-ID: <16344788-ED61-4AD1-A09C-1DE4A29DF11D@gmail.com>

From my experience, it?s not the URI; more likely an issue with the computer USB controller in the PC. ...Spent a bit of time finding that one.

Thanks,
Bob
K6ECM
73


> On Apr 17, 2018, at 7:05 AM, John Locke <jldharma at gmail.com> wrote:
> 
> Hi,
> I have a very strange problem with DIAL + USB URIs.
> I get choppy audio after a couple of days or maybe several hours of constant use.
> Restarting asterisk or even the PC wont solve the problem.
> The problem only goes away if I connect the URI to another USB or shut down the PC for several hours.
> Maybe some temperature problem on the USB card?? 
> 
> I'm using a standard PC (i5 + 8GB) with 2 USB URIs.
> To test the problem I connected a tone generator to the URIs.
> These are some examples of the saved audio files in asterisk:
> 
> Normal
> <image.png>
> 
> After several hours
> <image.png>
> 
> <image.png>
> 
> <image.png>
> 
> after one day
> <image.png>
> 
> <image.png>
> 
> Some advice would be very appreciated
> Thanks in advance
> Best Regards
> John
> 
> 
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/ae4aec14/attachment.html>

From bdboyle at bdboyle.com  Tue Apr 17 18:53:24 2018
From: bdboyle at bdboyle.com (Bryan D. Boyle)
Date: Tue, 17 Apr 2018 14:53:24 -0400
Subject: [App_rpt-users] Link audio level
In-Reply-To: <3198f4bc-8f04-a48b-8e80-b8bac63dce6b@kuggie.com>
References: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
 <9f73fad3-ad49-8dbc-1d69-38fce3596347@bryanfields.net>
 <CAOhDOk3P+ghmQZx9XiK2Lr6S3MDk=Tm-02GV1nPksQUpEW+Hfg@mail.gmail.com>
 <18a6545d-7302-fd1d-a62a-edfd6040fd31@msgstor.com>
 <3198f4bc-8f04-a48b-8e80-b8bac63dce6b@kuggie.com>
Message-ID: <AE6D676C-08BB-4CC1-81D3-BD13C883F378@bdboyle.com>

Not a battle we should be worried about, I?m thinking.

If David for IRLP or Digium (who I believe holds the copyright on Asterisk; open source does not mean it?s public domain, just that you?re obliged to follow a specific set of license requirements in the GPL from the Open Software Foundation) don?t want to enforce their rights (or may not even know that their rights are being infringed), then there is really nothing we can do about it, other than to take the high road and be sure OUR house is in order.  

IOW, it?s up to the OSF, Dave Cameron, and the legal owner of the Asterisk copyright to enforce, if they even know.

IANAL nor to I play one on TV or radio.  Just my $.02 and for more info, surf to http://www.lotuseuropa.us/disclaimer.htm
--
Bryan
Sent from my iPhone 6S...No electrons were harmed in the sending of this message.



> On Apr 17, 2018, at 14:32, Kevin Custer <kuggie at kuggie.com> wrote:
> 
> I recently had a discussion with David Cameron about a simulcast and voting project.  While talking to him, I asked if he had reconsidered his decision to disallow IRLP support in app_rpt.  In no uncertain terms has he changed his mind.  He doesn't want that code in Asterisk/app_rpt - - period.  
> 
> HamVoip includes code that goes against the creator of IRLP, but it doesn't seem to matter what other people think/want.  They are doing their own thing - for better or worse.  
> 
> While the "official" distribution of AllStar/Asterisk/app_rpt has not kept up with the times - times have changed.
> 
> Kevin W3KKC
> 
> 
> 
>> On 4/17/2018 2:06 PM, Steve Zingman wrote:
>> Yes,
>> We are getting reports of Dougie doing this type of thing more and more. Sorry that the users have to be subjected to such antics.
>> 
>> 73, Steve N4IRS
>> 
>>> On 4/17/2018 2:03 PM, ARS W5OMR wrote:
>>> Recently, I asked a question about dial on a rpi3 .
>>> Compton replied, off list.
>>> I told him to jump straight my ass ...
>>> Again.
>>> The first time, I lost write access on the other list. I couldn't even unsubscribe. 
>>> 
>>> There's something unstable about that guy. 
>>> 
>>> 
>>>> On Tue, Apr 17, 2018, 12:52 Bryan Fields <Bryan at bryanfields.net> wrote:
>>>> On 4/17/18 1:33 PM, K5CG wrote:
>>>> > Asterisk 1.4.23-pre.hamvoip-V1.5.3-28-*app_rpt-0.327*-04/05/2018 (should be
>>>> > OK, right?)
>>>> 
>>>> HamVoIP is not Allstar, and they do not make their source available.  This is
>>>> illegal and and an attack on our community values.  It's rather sad, I'm sure
>>>> Jim would be spinning in his grave over this.
>>>> 
>>>> The people behind HamVoIP are actively involved in copyright infringement and
>>>> are stealing from the community.  They have made many changes that break
>>>> things (channel drivers, etc) in non-standard ways.  As it's closed source
>>>> they could be embedding anything (bitcoin miners, bots, etc.) and you'd never
>>>> be the wiser.
>>>> 
>>>> Allstar is based on sharing and writing code that benefits all of the
>>>> community, and when a group violates that it's an affront to the entire user base.
>>>> 
>>>> Install the Allstar code, either from source or via apt-get and give it a try.
>>>>  If your still seeing issues please report back, the developers are here :)
>>>> 
>>>> 73's
>>>> -- 
>>>> Bryan Fields
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/ad3f8dde/attachment.html>

From kevin.babich at gmail.com  Tue Apr 17 18:59:12 2018
From: kevin.babich at gmail.com (Kevin Babich)
Date: Tue, 17 Apr 2018 13:59:12 -0500
Subject: [App_rpt-users] Link audio level
In-Reply-To: <AE6D676C-08BB-4CC1-81D3-BD13C883F378@bdboyle.com>
References: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
 <9f73fad3-ad49-8dbc-1d69-38fce3596347@bryanfields.net>
 <CAOhDOk3P+ghmQZx9XiK2Lr6S3MDk=Tm-02GV1nPksQUpEW+Hfg@mail.gmail.com>
 <18a6545d-7302-fd1d-a62a-edfd6040fd31@msgstor.com>
 <3198f4bc-8f04-a48b-8e80-b8bac63dce6b@kuggie.com>
 <AE6D676C-08BB-4CC1-81D3-BD13C883F378@bdboyle.com>
Message-ID: <1385D94A-7B42-4BA0-BD77-88F7C6B4D805@gmail.com>

Ditto

Kevin J. Babich

219.406.9707 Mobile
 
***Mobile EMail***

Please excuse any typos and brevity. 

> On Apr 17, 2018, at 1:53 PM, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:
> 
> Not a battle we should be worried about, I?m thinking.
> 
> If David for IRLP or Digium (who I believe holds the copyright on Asterisk; open source does not mean it?s public domain, just that you?re obliged to follow a specific set of license requirements in the GPL from the Open Software Foundation) don?t want to enforce their rights (or may not even know that their rights are being infringed), then there is really nothing we can do about it, other than to take the high road and be sure OUR house is in order.  
> 
> IOW, it?s up to the OSF, Dave Cameron, and the legal owner of the Asterisk copyright to enforce, if they even know.
> 
> IANAL nor to I play one on TV or radio.  Just my $.02 and for more info, surf to http://www.lotuseuropa.us/disclaimer.htm
> --
> Bryan
> Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
> 
> 
> 
>> On Apr 17, 2018, at 14:32, Kevin Custer <kuggie at kuggie.com> wrote:
>> 
>> I recently had a discussion with David Cameron about a simulcast and voting project.  While talking to him, I asked if he had reconsidered his decision to disallow IRLP support in app_rpt.  In no uncertain terms has he changed his mind.  He doesn't want that code in Asterisk/app_rpt - - period.  
>> 
>> HamVoip includes code that goes against the creator of IRLP, but it doesn't seem to matter what other people think/want.  They are doing their own thing - for better or worse.  
>> 
>> While the "official" distribution of AllStar/Asterisk/app_rpt has not kept up with the times - times have changed.
>> 
>> Kevin W3KKC
>> 
>> 
>> 
>>> On 4/17/2018 2:06 PM, Steve Zingman wrote:
>>> Yes,
>>> We are getting reports of Dougie doing this type of thing more and more. Sorry that the users have to be subjected to such antics.
>>> 
>>> 73, Steve N4IRS
>>> 
>>>> On 4/17/2018 2:03 PM, ARS W5OMR wrote:
>>>> Recently, I asked a question about dial on a rpi3 .
>>>> Compton replied, off list.
>>>> I told him to jump straight my ass ...
>>>> Again.
>>>> The first time, I lost write access on the other list. I couldn't even unsubscribe. 
>>>> 
>>>> There's something unstable about that guy. 
>>>> 
>>>> 
>>>>> On Tue, Apr 17, 2018, 12:52 Bryan Fields <Bryan at bryanfields.net> wrote:
>>>>> On 4/17/18 1:33 PM, K5CG wrote:
>>>>> > Asterisk 1.4.23-pre.hamvoip-V1.5.3-28-*app_rpt-0.327*-04/05/2018 (should be
>>>>> > OK, right?)
>>>>> 
>>>>> HamVoIP is not Allstar, and they do not make their source available.  This is
>>>>> illegal and and an attack on our community values.  It's rather sad, I'm sure
>>>>> Jim would be spinning in his grave over this.
>>>>> 
>>>>> The people behind HamVoIP are actively involved in copyright infringement and
>>>>> are stealing from the community.  They have made many changes that break
>>>>> things (channel drivers, etc) in non-standard ways.  As it's closed source
>>>>> they could be embedding anything (bitcoin miners, bots, etc.) and you'd never
>>>>> be the wiser.
>>>>> 
>>>>> Allstar is based on sharing and writing code that benefits all of the
>>>>> community, and when a group violates that it's an affront to the entire user base.
>>>>> 
>>>>> Install the Allstar code, either from source or via apt-get and give it a try.
>>>>>  If your still seeing issues please report back, the developers are here :)
>>>>> 
>>>>> 73's
>>>>> -- 
>>>>> Bryan Fields
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/8eccf4d2/attachment.html>

From tisawyer at gmail.com  Tue Apr 17 19:56:34 2018
From: tisawyer at gmail.com (Tim Sawyer)
Date: Tue, 17 Apr 2018 12:56:34 -0700
Subject: [App_rpt-users] Link audio level
In-Reply-To: <CAOhDOk3P+ghmQZx9XiK2Lr6S3MDk=Tm-02GV1nPksQUpEW+Hfg@mail.gmail.com>
References: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
 <9f73fad3-ad49-8dbc-1d69-38fce3596347@bryanfields.net>
 <CAOhDOk3P+ghmQZx9XiK2Lr6S3MDk=Tm-02GV1nPksQUpEW+Hfg@mail.gmail.com>
Message-ID: <CAG3ht9v8Xzrd1f5FYbAbCjpkvvRp+Kn1LSdt7Bgv4NHx-wgxdw@mail.gmail.com>

I've heard Doug poaches off list, telling posters they should switch to
HamVoIP.

On Tue, Apr 17, 2018 at 11:03 AM, ARS W5OMR <ars.w5omr at gmail.com> wrote:

> Recently, I asked a question about dial on a rpi3 .
> Compton replied, off list.
> I told him to jump straight my ass ...
> Again.
> The first time, I lost write access on the other list. I couldn't even
> unsubscribe.
>
> There's something unstable about that guy.
>
>
> On Tue, Apr 17, 2018, 12:52 Bryan Fields <Bryan at bryanfields.net> wrote:
>
>> On 4/17/18 1:33 PM, K5CG wrote:
>> > Asterisk 1.4.23-pre.hamvoip-V1.5.3-28-*app_rpt-0.327*-04/05/2018
>> (should be
>> > OK, right?)
>>
>> HamVoIP is not Allstar, and they do not make their source available.
>> This is
>> illegal and and an attack on our community values.  It's rather sad, I'm
>> sure
>> Jim would be spinning in his grave over this.
>>
>> The people behind HamVoIP are actively involved in copyright infringement
>> and
>> are stealing from the community.  They have made many changes that break
>> things (channel drivers, etc) in non-standard ways.  As it's closed source
>> they could be embedding anything (bitcoin miners, bots, etc.) and you'd
>> never
>> be the wiser.
>>
>> Allstar is based on sharing and writing code that benefits all of the
>> community, and when a group violates that it's an affront to the entire
>> user base.
>>
>> Install the Allstar code, either from source or via apt-get and give it a
>> try.
>>  If your still seeing issues please report back, the developers are here
>> :)
>>
>> 73's
>> --
>> Bryan Fields
>>
>> 727-409-1194 - Voice
>> http://bryanfields.net
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/
>> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/ea08c828/attachment.html>

From kb4fxc at inttek.net  Tue Apr 17 20:04:32 2018
From: kb4fxc at inttek.net (David McGough)
Date: Tue, 17 Apr 2018 16:04:32 -0400 (EDT)
Subject: [App_rpt-users] Link audio level
In-Reply-To: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
Message-ID: <Pine.LNX.4.44.1804171603540.27132-100000@goliath.inttek.net>


Hi Danny,

I don't think I've ever tried the linkmongain setting. But, I don't think
I've changed any of that code, either.  I'll test and if it's broken, fix
it, today.

73, David KB4FXC




On Tue, 17 Apr 2018, K5CG wrote:

> I'm trying to lower the audio level from the link to my RF repeater and I'm not seeing the linkmongain setting making a lick of difference. 
> 
> I have tried -6, -10, -20 and now have... 
> 
> linkmongain=-999 
> 
> ...in the node section below Audio level settings and above Dial Plan settings but there is no change. I wold expect this value to mute it completely on my transmitter audio. 
> 
> http://docs.allstarlink.org/drupal/node/71 
> 
> Asterisk 1.4.23-pre.hamvoip-V1.5.3-28- app_rpt-0.327 -04/05/2018 (should be OK, right?) 
> 
> Linux allstar 4.4.44-1-ARCH #1 SMP Mon Jan 23 19:01:18 MST 2017 armv7l GNU/Linux 
> 
> What have I done incorrectly? 
> 
> Thanks 
> 
> Danny 
> K5CG 
> 
> 
> 



From ars.w5omr at gmail.com  Tue Apr 17 20:38:57 2018
From: ars.w5omr at gmail.com (ARS W5OMR)
Date: Tue, 17 Apr 2018 20:38:57 +0000
Subject: [App_rpt-users] Link audio level
In-Reply-To: <CAG3ht9v8Xzrd1f5FYbAbCjpkvvRp+Kn1LSdt7Bgv4NHx-wgxdw@mail.gmail.com>
References: <1688094277.47233.1523986407085.JavaMail.zimbra@siminiuk.com>
 <9f73fad3-ad49-8dbc-1d69-38fce3596347@bryanfields.net>
 <CAOhDOk3P+ghmQZx9XiK2Lr6S3MDk=Tm-02GV1nPksQUpEW+Hfg@mail.gmail.com>
 <CAG3ht9v8Xzrd1f5FYbAbCjpkvvRp+Kn1LSdt7Bgv4NHx-wgxdw@mail.gmail.com>
Message-ID: <CAOhDOk2hhYqQd+UHvAaEpg+U8Oxf_2RGNUPNsjjMDUHQM7FFdg@mail.gmail.com>

That was his intent when I asked about dial on a pi.



On Tue, Apr 17, 2018, 14:56 Tim Sawyer <tisawyer at gmail.com> wrote:

> I've heard Doug poaches off list, telling posters they should switch to
> HamVoIP.
>
> On Tue, Apr 17, 2018 at 11:03 AM, ARS W5OMR <ars.w5omr at gmail.com> wrote:
>
>> Recently, I asked a question about dial on a rpi3 .
>> Compton replied, off list.
>> I told him to jump straight my ass ...
>> Again.
>> The first time, I lost write access on the other list. I couldn't even
>> unsubscribe.
>>
>> There's something unstable about that guy.
>>
>>
>> On Tue, Apr 17, 2018, 12:52 Bryan Fields <Bryan at bryanfields.net> wrote:
>>
>>> On 4/17/18 1:33 PM, K5CG wrote:
>>> > Asterisk 1.4.23-pre.hamvoip-V1.5.3-28-*app_rpt-0.327*-04/05/2018
>>> (should be
>>> > OK, right?)
>>>
>>> HamVoIP is not Allstar, and they do not make their source available.
>>> This is
>>> illegal and and an attack on our community values.  It's rather sad, I'm
>>> sure
>>> Jim would be spinning in his grave over this.
>>>
>>> The people behind HamVoIP are actively involved in copyright
>>> infringement and
>>> are stealing from the community.  They have made many changes that break
>>> things (channel drivers, etc) in non-standard ways.  As it's closed
>>> source
>>> they could be embedding anything (bitcoin miners, bots, etc.) and you'd
>>> never
>>> be the wiser.
>>>
>>> Allstar is based on sharing and writing code that benefits all of the
>>> community, and when a group violates that it's an affront to the entire
>>> user base.
>>>
>>> Install the Allstar code, either from source or via apt-get and give it
>>> a try.
>>>  If your still seeing issues please report back, the developers are here
>>> :)
>>>
>>> 73's
>>> --
>>> Bryan Fields
>>>
>>> 727-409-1194 - Voice
>>> http://bryanfields.net
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> Tim WD6AWP
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/a93f7d3a/attachment.html>

From kb4fxc at inttek.net  Tue Apr 17 22:30:31 2018
From: kb4fxc at inttek.net (David McGough)
Date: Tue, 17 Apr 2018 18:30:31 -0400 (EDT)
Subject: [App_rpt-users] Link audio level
In-Reply-To: <Pine.LNX.4.44.1804171603540.27132-100000@goliath.inttek.net>
Message-ID: <Pine.LNX.4.44.1804171807560.27132-100000@goliath.inttek.net>


Hi Danny,

I tested the linkmongain setting and it does work as it was designed to.
That command is named poorly, calling it linkmonduck would be a better
name.

linkmongain ONLY works for links in monitor mode, meaning that the
connection was made using *2 (or *72 for permanent connections)...It does
NOT work when *3 (or *73 for permanent connections) is the connection
mode.

Also note that linkmongain only changes the level of the monitored links 
when other normal local or link audio is also present. So, this acts 
similarly to telemetry ducking, where the telemetry level is changed by 
the telemduckgain parameter---when local (or other link audio) audio is 
present, only then does the linkmongain setting have any impact.

There is no parameter (that I know of?) to independently adjust the audio
level for incoming AllStar links. This is different from echolink (erxgain
parameter), IRLP (irxgain parameter) and TLB (The link box) (trxgain
parameter), where they can have their network audio levels changed....It
is normally considered that AllStar links will all have their levels 
"normalized," so an independent setting for AllStar link gain levels 
should be unneeded.

Does this make sense?

If there is a need, for an AllStar link gain setting, I add this to the 
feature request list??


73, David KB4FXC




On Tue, 17 Apr 2018, David McGough wrote:

> 
Hi Danny,

I don't think I've ever tried the linkmongain setting. But, I don't think
I've changed any of that code, either.  I'll test and if it's broken, fix
it, today.

73, David KB4FXC




On Tue, 17 Apr 2018, K5CG wrote:

> I'm trying to lower the audio level from the link to my RF repeater and I'm not seeing the linkmongain setting making a lick of difference. 
> 
> I have tried -6, -10, -20 and now have... 
> 
> linkmongain=-999 
> 
> ...in the node section below Audio level settings and above Dial Plan settings but there is no change. I wold expect this value to mute it completely on my transmitter audio. 
> 
> http://docs.allstarlink.org/drupal/node/71 
> 
> Asterisk 1.4.23-pre.hamvoip-V1.5.3-28- app_rpt-0.327 -04/05/2018 (should be OK, right?) 
> 
> Linux allstar 4.4.44-1-ARCH #1 SMP Mon Jan 23 19:01:18 MST 2017 armv7l GNU/Linux 
> 
> What have I done incorrectly? 
> 
> Thanks 
> 
> Danny 
> K5CG 
> 
> 
> 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



From kuggie at kuggie.com  Tue Apr 17 23:17:08 2018
From: kuggie at kuggie.com (Kevin Custer)
Date: Tue, 17 Apr 2018 19:17:08 -0400
Subject: [App_rpt-users] AllStarLink, Inc. - Who are we?
Message-ID: <412cbf13-7f2a-8d82-c4db-3ceafb50e09e@kuggie.com>

Since the untimely passing of Jim Dixon WB6NIL, AllStar Link has gone 
through many changes.? The biggest one is - -? this project is no longer 
the responsibility of one person or small group.? While Jim always had 
folks helping with the administration of the website, approving new 
members, and issuing node numbers, writing code and doing updates and 
bug fixes was primarily his job.? Since then, another group of 
individuals was assembled to carry on Jim's vision.? The assembly of 
this group was done by Steve RoDgers, Jim's original partner in AllStar 
Link.? The group has gathered together many talented people for both the 
admin team, and the development team.? There are now over a dozen people 
helping with the project, and a lot of good things have already 
happened.? The AllStar Link Network is stable, growing, and will be for 
years to come.

This is the first of many announcements that will come from the only 
official source of AllStar - AllStarLink Inc.? We've written a summary 
of the organization as it stands today.? Please take the time to follow 
the link.? And - as always, please feel free to reach out to us as a 
group, or individually if you like.

http://wiki.allstarlink.org/wiki/The_Organization_-_AllStarLink_Inc.

For AllStarLink Incorporated,
Kevin Custer W3KKC




From kuggie at kuggie.com  Tue Apr 17 23:26:46 2018
From: kuggie at kuggie.com (Kevin Custer)
Date: Tue, 17 Apr 2018 19:26:46 -0400
Subject: [App_rpt-users] AllStarLink, Inc. - Who are we?
In-Reply-To: <412cbf13-7f2a-8d82-c4db-3ceafb50e09e@kuggie.com>
References: <412cbf13-7f2a-8d82-c4db-3ceafb50e09e@kuggie.com>
Message-ID: <0d838e45-93ff-7ede-55f2-98b1b24b0410@kuggie.com>

On 4/17/2018 7:17 PM, Kevin Custer wrote:
> http://wiki.allstarlink.org/wiki/The_Organization_-_AllStarLink_Inc.

The link did not propagate through the email list correctly.? The period 
is missing at the end.

Either place the period in your browser, or use this link and then click 
on the link to "The Organization" under the Main section.

http://wiki.allstarlink.org/wiki/Main_Page

Thanks,
Kevin

An additional attempt using brackets:
<http://wiki.allstarlink.org/wiki/The_Organization_-_AllStarLink_Inc.>


From app_rpt-users at lists.allstarlink.org  Tue Apr 17 23:38:12 2018
From: app_rpt-users at lists.allstarlink.org (Users of Asterisk app_rpt)
Date: Tue, 17 Apr 2018 19:38:12 -0400
Subject: [App_rpt-users] test
Message-ID: <mailman.482.1524008296.19482.app_rpt-users@lists.allstarlink.org>

test


From app_rpt-users at lists.allstarlink.org  Tue Apr 17 23:50:43 2018
From: app_rpt-users at lists.allstarlink.org (Users of Asterisk app_rpt)
Date: Tue, 17 Apr 2018 19:50:43 -0400
Subject: [App_rpt-users] test
In-Reply-To: <mailman.482.1524008296.19482.app_rpt-users@lists.allstarlink.org>
References: <mailman.482.1524008296.19482.app_rpt-users@lists.allstarlink.org>
Message-ID: <mailman.483.1524009047.19482.app_rpt-users@lists.allstarlink.org>

did we pass?

--
Bryan
Sent from my iPhone 6S...No electrons were harmed in the sending of this message.



> On Apr 17, 2018, at 19:38, Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org> wrote:
> 
> test
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/4716d698/attachment.html>

From app_rpt-users at lists.allstarlink.org  Tue Apr 17 23:51:33 2018
From: app_rpt-users at lists.allstarlink.org (Users of Asterisk app_rpt)
Date: Tue, 17 Apr 2018 19:51:33 -0400
Subject: [App_rpt-users] test
In-Reply-To: <mailman.483.1524009047.19482.app_rpt-users@lists.allstarlink.org>
References: <mailman.482.1524008296.19482.app_rpt-users@lists.allstarlink.org>
 <mailman.483.1524009047.19482.app_rpt-users@lists.allstarlink.org>
Message-ID: <mailman.484.1524009096.19482.app_rpt-users@lists.allstarlink.org>

Time will tell, I'm grading on a curve.

On 04/17/2018 07:50 PM, Users of Asterisk app_rpt wrote:
> did we pass?
>
> -- 
> Bryan
> Sent from my iPhone 6S...No electrons were harmed in the sending of 
> this message.
>
>
>
> On Apr 17, 2018, at 19:38, Users of Asterisk app_rpt 
> <app_rpt-users at lists.allstarlink.org 
> <mailto:app_rpt-users at lists.allstarlink.org>> wrote:
>
>> test
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org 
>> <mailto:App_rpt-users at lists.allstarlink.org>
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>> and scroll down to the bottom of the page. Enter your email address 
>> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/98ea1736/attachment.html>

From app_rpt-users at lists.allstarlink.org  Wed Apr 18 00:06:06 2018
From: app_rpt-users at lists.allstarlink.org (Users of Asterisk app_rpt)
Date: Wed, 18 Apr 2018 00:06:06 +0000
Subject: [App_rpt-users] test
In-Reply-To: <mailman.484.1524009096.19482.app_rpt-users@lists.allstarlink.org>
References: <mailman.482.1524008296.19482.app_rpt-users@lists.allstarlink.org>
 <mailman.483.1524009047.19482.app_rpt-users@lists.allstarlink.org>
 <mailman.484.1524009096.19482.app_rpt-users@lists.allstarlink.org>
Message-ID: <mailman.485.1524009979.19482.app_rpt-users@lists.allstarlink.org>

The header doesn't show who the message is from

On Tue, Apr 17, 2018, 18:51 Users of Asterisk app_rpt <
app_rpt-users at lists.allstarlink.org> wrote:

> Time will tell, I'm grading on a curve.
>
> On 04/17/2018 07:50 PM, Users of Asterisk app_rpt wrote:
>
> did we pass?
>
> --
> Bryan
> Sent from my iPhone 6S...No electrons were harmed in the sending of this
> message.
>
>
>
> On Apr 17, 2018, at 19:38, Users of Asterisk app_rpt <
> app_rpt-users at lists.allstarlink.org> wrote:
>
> test
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180418/565663f6/attachment.html>

From app_rpt-users at lists.allstarlink.org  Wed Apr 18 00:19:56 2018
From: app_rpt-users at lists.allstarlink.org (Users of Asterisk app_rpt)
Date: Tue, 17 Apr 2018 17:19:56 -0700 (PDT)
Subject: [App_rpt-users] Link audio level
In-Reply-To: <Pine.LNX.4.44.1804171807560.27132-100000@goliath.inttek.net>
References: <Pine.LNX.4.44.1804171807560.27132-100000@goliath.inttek.net>
Message-ID: <mailman.486.1524010800.19482.app_rpt-users@lists.allstarlink.org>

Thanks David, no need to go any further on this. Thanks for checking. 

Everything is working as it should.

Danny
K5CG

----- Original Message -----
From: "David McGough" <kb4fxc at inttek.net>
To: "k5cg" <k5cg at hamoperator.org>
Cc: "Users of Asterisk app_rpt" <app_rpt-users at lists.allstarlink.org>
Sent: Tuesday, April 17, 2018 5:30:31 PM
Subject: Re: [App_rpt-users] Link audio level

Hi Danny,

I tested the linkmongain setting and it does work as it was designed to.
That command is named poorly, calling it linkmonduck would be a better
name.

linkmongain ONLY works for links in monitor mode, meaning that the
connection was made using *2 (or *72 for permanent connections)...It does
NOT work when *3 (or *73 for permanent connections) is the connection
mode.

Also note that linkmongain only changes the level of the monitored links 
when other normal local or link audio is also present. So, this acts 
similarly to telemetry ducking, where the telemetry level is changed by 
the telemduckgain parameter---when local (or other link audio) audio is 
present, only then does the linkmongain setting have any impact.

There is no parameter (that I know of?) to independently adjust the audio
level for incoming AllStar links. This is different from echolink (erxgain
parameter), IRLP (irxgain parameter) and TLB (The link box) (trxgain
parameter), where they can have their network audio levels changed....It
is normally considered that AllStar links will all have their levels 
"normalized," so an independent setting for AllStar link gain levels 
should be unneeded.

Does this make sense?

If there is a need, for an AllStar link gain setting, I add this to the 
feature request list??


73, David KB4FXC




On Tue, 17 Apr 2018, David McGough wrote:

> 
Hi Danny,

I don't think I've ever tried the linkmongain setting. But, I don't think
I've changed any of that code, either.  I'll test and if it's broken, fix
it, today.

73, David KB4FXC




On Tue, 17 Apr 2018, K5CG wrote:

> I'm trying to lower the audio level from the link to my RF repeater and I'm not seeing the linkmongain setting making a lick of difference. 
> 
> I have tried -6, -10, -20 and now have... 
> 
> linkmongain=-999 
> 
> ...in the node section below Audio level settings and above Dial Plan settings but there is no change. I wold expect this value to mute it completely on my transmitter audio. 
> 
> http://docs.allstarlink.org/drupal/node/71 
> 
> Asterisk 1.4.23-pre.hamvoip-V1.5.3-28- app_rpt-0.327 -04/05/2018 (should be OK, right?) 
> 
> Linux allstar 4.4.44-1-ARCH #1 SMP Mon Jan 23 19:01:18 MST 2017 armv7l GNU/Linux 
> 
> What have I done incorrectly? 
> 
> Thanks 
> 
> Danny 
> K5CG 
> 
> 
> 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From app_rpt-users at lists.allstarlink.org  Wed Apr 18 04:12:30 2018
From: app_rpt-users at lists.allstarlink.org (Users of Asterisk app_rpt)
Date: Tue, 17 Apr 2018 21:12:30 -0700
Subject: [App_rpt-users] Whose Voice in Sound Files?
Message-ID: <mailman.487.1524024755.19482.app_rpt-users@lists.allstarlink.org>

Whose Voice is recorded in the new Sound Files?

Thanks,
Bob
K6ECM
73

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/10a9b03b/attachment.html>

From app_rpt-users at lists.allstarlink.org  Wed Apr 18 04:27:40 2018
From: app_rpt-users at lists.allstarlink.org (Users of Asterisk app_rpt)
Date: Tue, 17 Apr 2018 21:27:40 -0700
Subject: [App_rpt-users] Whose Voice in Sound Files?
Message-ID: <mailman.488.1524025666.19482.app_rpt-users@lists.allstarlink.org>

Allison Smith. Look her up on Wikipedia, Allison Smith the voice of Asterisk
Sent from my T-Mobile 4G LTE device
------ Original message------From: Users of Asterisk app_rpt Date: Tue, Apr 17, 2018 9:12 PMTo: app_rpt-users at lists.allstarlink.org;Cc: Subject:[App_rpt-users] Whose Voice in Sound Files?
Whose Voice is recorded in the new Sound Files?
Thanks,BobK6ECM73
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180417/afbe3198/attachment.html>

From thorn at myactv.net  Wed Apr 18 10:16:15 2018
From: thorn at myactv.net (Greg Thornwall)
Date: Wed, 18 Apr 2018 06:16:15 -0400
Subject: [App_rpt-users] Whose Voice in Sound Files?
In-Reply-To: <mailman.488.1524025666.19482.app_rpt-users@lists.allstarlink.org>
References: <mailman.488.1524025666.19482.app_rpt-users@lists.allstarlink.org>
Message-ID: <2215fb92-b4be-3ec6-1d23-1cbdd81542d6@myactv.net>

https://www.youtube.com/watch?v=GKuXUVbo_IQ


On 04/18/2018 12:27 AM, Users of Asterisk app_rpt wrote:
> Allison Smith. Look her up on Wikipedia, Allison Smith the voice of
> Asterisk
>
> /Sent from my T-Mobile 4G LTE device/
>
> ------ Original message------
> *From: *Users of Asterisk app_rpt
> *Date: *Tue, Apr 17, 2018 9:12 PM
> *To: *app_rpt-users at lists.allstarlink.org
> <mailto:app_rpt-users at lists.allstarlink.org>;
> *Cc: *
> *Subject:*[App_rpt-users] Whose Voice in Sound Files?
>
> Whose Voice is recorded in the new Sound Files?
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180418/45bff883/attachment.html>

From jldharma at gmail.com  Thu Apr 19 17:54:49 2018
From: jldharma at gmail.com (John Locke)
Date: Thu, 19 Apr 2018 14:54:49 -0300
Subject: [App_rpt-users] Very strange problem with DIAL + USB URIs.
In-Reply-To: <16344788-ED61-4AD1-A09C-1DE4A29DF11D@gmail.com>
References: <CACaxzOgDtb3LKFOwq5WM-YA_4XZFu-aA5y8jD-wiLp7bchtdoA@mail.gmail.com>
 <16344788-ED61-4AD1-A09C-1DE4A29DF11D@gmail.com>
Message-ID: <CACaxzOh1uSvgLqiGVbLo08tgA2ZZWViN+H-doTbQYnLF20ET5g@mail.gmail.com>

I am testing with 3 o 4 different PC models with the same problem, all new
models...
Some of them can run for 2 days without the problem, some get the audio
chopped in just a few hours.

I'm using usbradio. Do you think that the simpleusb can work better?

I have no experience with simpleusb, and I'm willing to pay some consulting
hours to solve this problem...

Some advice would be very appreciated
Thanks in advance
Best Regards
John



On Tue, Apr 17, 2018 at 3:48 PM, Bob Pyke <k6ecm1 at gmail.com> wrote:

> From my experience, it?s not the URI; more likely an issue with the
> computer USB controller in the PC. ...Spent a bit of time finding that one.
>
> Thanks,
> Bob
> K6ECM
> 73
>
>
> On Apr 17, 2018, at 7:05 AM, John Locke <jldharma at gmail.com> wrote:
>
> Hi,
> I have a very strange problem with DIAL + USB URIs.
> I get choppy audio after a couple of days or maybe several hours of
> constant use.
> Restarting asterisk or even the PC wont solve the problem.
> The problem only goes away if I connect the URI to another USB or shut
> down the PC for several hours.
> Maybe some temperature problem on the USB card??
>
> I'm using a standard PC (i5 + 8GB) with 2 USB URIs.
> To test the problem I connected a tone generator to the URIs.
> These are some examples of the saved audio files in asterisk:
>
> Normal
> <image.png>
>
> After several hours
> <image.png>
>
> <image.png>
>
> <image.png>
>
> after one day
> <image.png>
>
> <image.png>
>
> Some advice would be very appreciated
> Thanks in advance
> Best Regards
> John
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180419/3c86f2e3/attachment.html>

From kb4fxc at inttek.net  Thu Apr 19 19:36:57 2018
From: kb4fxc at inttek.net (David McGough)
Date: Thu, 19 Apr 2018 15:36:57 -0400 (EDT)
Subject: [App_rpt-users] Very strange problem with DIAL + USB URIs.
In-Reply-To: <CACaxzOh1uSvgLqiGVbLo08tgA2ZZWViN+H-doTbQYnLF20ET5g@mail.gmail.com>
Message-ID: <Pine.LNX.4.44.1804191531070.31408-100000@goliath.inttek.net>


Hi John,

When you start to have the audio problems, try running the dahdi_test 
program from a bash prompt. Here are sample numbers from a Raspberry Pi 
3B plus, with turbo mode enabled:

[root at kb4fxc-portable asterisk]# dahdi_test -c 100
Opened pseudo dahdi interface, measuring accuracy...
99.992% 99.989% 99.996% 99.995% 99.996% 99.996% 99.993% 99.995% 
99.994% 99.992% 99.995% 99.995% 99.995% 99.996% 99.993% 99.995% 
99.995% 99.995% 99.993% 99.994% 99.994% 99.995% 99.994% 99.994% 
99.994% 99.993% 99.994% 99.994% 99.994% 99.994% 99.994% 99.994% 
99.994% 99.993% 99.994% 99.993% 99.995% 99.995% 99.995% 99.996% 
99.995% 99.995% 99.995% 99.995% 99.995% 99.996% 99.995% 99.994% 
99.995% 99.994% 99.995% 99.995% 99.995% 99.995% 99.995% 99.995% 
99.996% 99.994% 99.995% 99.995% 99.995% 99.995% 99.995% 99.995% 
99.995% 99.994% 99.995% 99.995% 99.995% 99.995% 99.996% 99.995% 
99.995% 99.994% 99.995% 99.995% 99.995% 99.996% 99.995% 99.995% 
99.995% 99.994% 99.995% 99.995% 99.995% 99.995% 99.996% 99.994% 
99.995% 99.994% 99.995% 99.996% 99.994% 99.995% 99.995% 99.995% 
99.995% 99.993% 
--- Results after 98 passes ---
Best: 99.996% -- Worst: 99.989% -- Average: 99.994621%
Cummulative Accuracy (not per pass): 99.995


73, David KB4FXC



On Thu, 19 Apr 2018, John Locke wrote:

> I am testing with 3 o 4 different PC models with the same problem, all new
> models...
> Some of them can run for 2 days without the problem, some get the audio
> chopped in just a few hours.
> 
> I'm using usbradio. Do you think that the simpleusb can work better?
> 
> I have no experience with simpleusb, and I'm willing to pay some consulting
> hours to solve this problem...
> 
> Some advice would be very appreciated
> Thanks in advance
> Best Regards
> John
> 
> 
> 
> On Tue, Apr 17, 2018 at 3:48 PM, Bob Pyke <k6ecm1 at gmail.com> wrote:
> 
> > From my experience, it???s not the URI; more likely an issue with the
> > computer USB controller in the PC. ...Spent a bit of time finding that one.
> >
> > Thanks,
> > Bob
> > K6ECM
> > 73
> >
> >
> > On Apr 17, 2018, at 7:05 AM, John Locke <jldharma at gmail.com> wrote:
> >
> > Hi,
> > I have a very strange problem with DIAL + USB URIs.
> > I get choppy audio after a couple of days or maybe several hours of
> > constant use.
> > Restarting asterisk or even the PC wont solve the problem.
> > The problem only goes away if I connect the URI to another USB or shut
> > down the PC for several hours.
> > Maybe some temperature problem on the USB card??
> >
> > I'm using a standard PC (i5 + 8GB) with 2 USB URIs.
> > To test the problem I connected a tone generator to the URIs.
> > These are some examples of the saved audio files in asterisk:
> >
> > Normal
> > <image.png>
> >
> > After several hours
> > <image.png>
> >
> > <image.png>
> >
> > <image.png>
> >
> > after one day
> > <image.png>
> >
> > <image.png>
> >
> > Some advice would be very appreciated
> > Thanks in advance
> > Best Regards
> > John
> >
> >
> >
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> > the page. Enter your email address and press the "Unsubscribe or edit
> > options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> > the page. Enter your email address and press the "Unsubscribe or edit
> > options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
> 



From k6ecm1 at gmail.com  Fri Apr 20 14:09:14 2018
From: k6ecm1 at gmail.com (Bob Pyke)
Date: Fri, 20 Apr 2018 07:09:14 -0700
Subject: [App_rpt-users] EchoLink Server Stuck On
Message-ID: <15A35AF6-B8F6-4F37-BAAD-2BB4C4FD1A2A@gmail.com>

EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a ?noload? state for over two days now, and the EchoLink website still shows our node as being a valid login. I?ve sent a service request in to EchoLink without response. My question is this, do I need to do more than ?noload? the EchoLink module so the EchoLink server won?t see us as a login?

Thanks,
Bob
K6ECM

Sent from iPad



From szingman at msgstor.com  Fri Apr 20 14:27:34 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Fri, 20 Apr 2018 10:27:34 -0400
Subject: [App_rpt-users] EchoLink Server Stuck On
In-Reply-To: <15A35AF6-B8F6-4F37-BAAD-2BB4C4FD1A2A@gmail.com>
References: <15A35AF6-B8F6-4F37-BAAD-2BB4C4FD1A2A@gmail.com>
Message-ID: <11253bd4-ee7f-cf90-eac7-aacc674951a1@msgstor.com>

 From the asterisk CLI>
show modules like echo or
show modules like chan
Verify chan_echolink is not loaded.

Steve

On 4/20/2018 10:09 AM, Bob Pyke wrote:
> EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a ?noload? state for over two days now, and the EchoLink website still shows our node as being a valid login. I?ve sent a service request in to EchoLink without response. My question is this, do I need to do more than ?noload? the EchoLink module so the EchoLink server won?t see us as a login?
>
> Thanks,
> Bob
> K6ECM
>
> Sent from iPad
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From loren at lorentedford.com  Fri Apr 20 14:37:59 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Fri, 20 Apr 2018 09:37:59 -0500
Subject: [App_rpt-users] EchoLink Server Stuck On
In-Reply-To: <15A35AF6-B8F6-4F37-BAAD-2BB4C4FD1A2A@gmail.com>
References: <15A35AF6-B8F6-4F37-BAAD-2BB4C4FD1A2A@gmail.com>
Message-ID: <20180420143758.37D581E1D4E@morty.keekles.org>


Bob, 
	Try using ssh into the repeater nano /etc/asterisk/modeules.conf  Under the Channels section look for the line

load => chan_echolink.so ;

You can also do a search in nano by hitting ctrl w and typing chan_echolink.so

After your sure that noload is in front of chan_echolink.so 
Example
noload => chan_echolink.so ;

Then either reboot asterisk via using astres.sh or astdn.sh to shutdown asterisk or astup.sh to start up asterisk..

I personally recommend a full reboot 

Also if your not using echolink any further I recommend that you go into UFW and delete the rules for the ports 4198/udp and 4199/udp also you will need to remove 5200/tcp from the rules.. 

Typically after I remove those rules I tend to put deny in those ports afterwards just as an extra measure to ensure it can?t communicate.. 


Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Bob Pyke
Sent: Friday, April 20, 2018 9:09 AM
To: app_rpt-users at lists.allstarlink.org
Subject: [App_rpt-users] EchoLink Server Stuck On

EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a ?noload? state for over two days now, and the EchoLink website still shows our node as being a valid login. I?ve sent a service request in to EchoLink without response. My question is this, do I need to do more than ?noload? the EchoLink module so the EchoLink server won?t see us as a login?

Thanks,
Bob
K6ECM

Sent from iPad

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180420/21696e14/attachment.html>

From k6ecm1 at gmail.com  Fri Apr 20 15:52:34 2018
From: k6ecm1 at gmail.com (Bob Pyke)
Date: Fri, 20 Apr 2018 08:52:34 -0700
Subject: [App_rpt-users] EchoLink Server Stuck On
In-Reply-To: <11253bd4-ee7f-cf90-eac7-aacc674951a1@msgstor.com>
References: <15A35AF6-B8F6-4F37-BAAD-2BB4C4FD1A2A@gmail.com>
 <11253bd4-ee7f-cf90-eac7-aacc674951a1@msgstor.com>
Message-ID: <ADF2BA9A-E870-45AE-AE46-E13F255052E6@gmail.com>

No EchoLink modules in the CL> list. The 4 ?chan_? in the list are identified as ?load? in modules.conf

So, does this mean the repeater is not contacting the EchoLink server?

Thanks,
Bob
K6ECM
73


> On Apr 20, 2018, at 7:27 AM, Steve Zingman <szingman at msgstor.com> wrote:
> 
> From the asterisk CLI>
> show modules like echo or
> show modules like chan
> Verify chan_echolink is not loaded.
> 
> Steve
> 
>> On 4/20/2018 10:09 AM, Bob Pyke wrote:
>> EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a ?noload? state for over two days now, and the EchoLink website still shows our node as being a valid login. I?ve sent a service request in to EchoLink without response. My question is this, do I need to do more than ?noload? the EchoLink module so the EchoLink server won?t see us as a login?
>> 
>> Thanks,
>> Bob
>> K6ECM
>> 
>> Sent from iPad
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From k6ecm1 at gmail.com  Fri Apr 20 16:04:28 2018
From: k6ecm1 at gmail.com (Bob Pyke)
Date: Fri, 20 Apr 2018 09:04:28 -0700
Subject: [App_rpt-users] EchoLink Server Stuck On
In-Reply-To: <ADF2BA9A-E870-45AE-AE46-E13F255052E6@gmail.com>
References: <15A35AF6-B8F6-4F37-BAAD-2BB4C4FD1A2A@gmail.com>
 <11253bd4-ee7f-cf90-eac7-aacc674951a1@msgstor.com>
 <ADF2BA9A-E870-45AE-AE46-E13F255052E6@gmail.com>
Message-ID: <A72870B0-1366-4DF1-87FF-2948666DD3D5@gmail.com>

Just received a message from EchoLink who said they are still receiving intermittent info from my node.

Thanks,
Bob
K6ECM
73


> On Apr 20, 2018, at 8:52 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
> 
> No EchoLink modules in the CL> list. The 4 ?chan_? in the list are identified as ?load? in modules.conf
> 
> So, does this mean the repeater is not contacting the EchoLink server?
> 
> Thanks,
> Bob
> K6ECM
> 73
> 
> 
>> On Apr 20, 2018, at 7:27 AM, Steve Zingman <szingman at msgstor.com> wrote:
>> 
>> From the asterisk CLI>
>> show modules like echo or
>> show modules like chan
>> Verify chan_echolink is not loaded.
>> 
>> Steve
>> 
>>> On 4/20/2018 10:09 AM, Bob Pyke wrote:
>>> EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a ?noload? state for over two days now, and the EchoLink website still shows our node as being a valid login. I?ve sent a service request in to EchoLink without response. My question is this, do I need to do more than ?noload? the EchoLink module so the EchoLink server won?t see us as a login?
>>> 
>>> Thanks,
>>> Bob
>>> K6ECM
>>> 
>>> Sent from iPad
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From k6ecm1 at gmail.com  Fri Apr 20 16:14:57 2018
From: k6ecm1 at gmail.com (Bob Pyke)
Date: Fri, 20 Apr 2018 09:14:57 -0700
Subject: [App_rpt-users] EchoLink Server Stuck On
In-Reply-To: <A72870B0-1366-4DF1-87FF-2948666DD3D5@gmail.com>
References: <15A35AF6-B8F6-4F37-BAAD-2BB4C4FD1A2A@gmail.com>
 <11253bd4-ee7f-cf90-eac7-aacc674951a1@msgstor.com>
 <ADF2BA9A-E870-45AE-AE46-E13F255052E6@gmail.com>
 <A72870B0-1366-4DF1-87FF-2948666DD3D5@gmail.com>
Message-ID: <A5B1B1C7-6E03-4DCA-8A57-5E08C842991A@gmail.com>

Figured it out... slow kid here. I was working on a replacement RPi, and it was running from my location, sending updates to EchoLink. (Sigh!)

Sorry for the confusion. Your CLI> instructions plus the EchoLink IP address info helped me converge on the problem... it was me all along.(grrr)

Thanks,
Bob
K6ECM
73


> On Apr 20, 2018, at 9:04 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
> 
> Just received a message from EchoLink who said they are still receiving intermittent info from my node.
> 
> Thanks,
> Bob
> K6ECM
> 73
> 
> 
>> On Apr 20, 2018, at 8:52 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
>> 
>> No EchoLink modules in the CL> list. The 4 ?chan_? in the list are identified as ?load? in modules.conf
>> 
>> So, does this mean the repeater is not contacting the EchoLink server?
>> 
>> Thanks,
>> Bob
>> K6ECM
>> 73
>> 
>> 
>>> On Apr 20, 2018, at 7:27 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>> 
>>> From the asterisk CLI>
>>> show modules like echo or
>>> show modules like chan
>>> Verify chan_echolink is not loaded.
>>> 
>>> Steve
>>> 
>>>> On 4/20/2018 10:09 AM, Bob Pyke wrote:
>>>> EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a ?noload? state for over two days now, and the EchoLink website still shows our node as being a valid login. I?ve sent a service request in to EchoLink without response. My question is this, do I need to do more than ?noload? the EchoLink module so the EchoLink server won?t see us as a login?
>>>> 
>>>> Thanks,
>>>> Bob
>>>> K6ECM
>>>> 
>>>> Sent from iPad
>>>> 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From szingman at msgstor.com  Fri Apr 20 16:16:45 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Fri, 20 Apr 2018 12:16:45 -0400
Subject: [App_rpt-users] EchoLink Server Stuck On
In-Reply-To: <A5B1B1C7-6E03-4DCA-8A57-5E08C842991A@gmail.com>
References: <15A35AF6-B8F6-4F37-BAAD-2BB4C4FD1A2A@gmail.com>
 <11253bd4-ee7f-cf90-eac7-aacc674951a1@msgstor.com>
 <ADF2BA9A-E870-45AE-AE46-E13F255052E6@gmail.com>
 <A72870B0-1366-4DF1-87FF-2948666DD3D5@gmail.com>
 <A5B1B1C7-6E03-4DCA-8A57-5E08C842991A@gmail.com>
Message-ID: <54ec6fa0-acd6-6e10-bbac-e4f8b24e496c@msgstor.com>

Bob,
we all do it, some even admit it. Logical troubleshooting is the key. 
Glad it's resolved.

73, Steve N4IRS

On 4/20/2018 12:14 PM, Bob Pyke wrote:
> Figured it out... slow kid here. I was working on a replacement RPi, and it was running from my location, sending updates to EchoLink. (Sigh!)
>
> Sorry for the confusion. Your CLI> instructions plus the EchoLink IP address info helped me converge on the problem... it was me all along.(grrr)
>
> Thanks,
> Bob
> K6ECM
> 73
>
>
>> On Apr 20, 2018, at 9:04 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
>>
>> Just received a message from EchoLink who said they are still receiving intermittent info from my node.
>>
>> Thanks,
>> Bob
>> K6ECM
>> 73
>>
>>
>>> On Apr 20, 2018, at 8:52 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
>>>
>>> No EchoLink modules in the CL> list. The 4 ?chan_? in the list are identified as ?load? in modules.conf
>>>
>>> So, does this mean the repeater is not contacting the EchoLink server?
>>>
>>> Thanks,
>>> Bob
>>> K6ECM
>>> 73
>>>
>>>
>>>> On Apr 20, 2018, at 7:27 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>>>
>>>>  From the asterisk CLI>
>>>> show modules like echo or
>>>> show modules like chan
>>>> Verify chan_echolink is not loaded.
>>>>
>>>> Steve
>>>>
>>>>> On 4/20/2018 10:09 AM, Bob Pyke wrote:
>>>>> EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a ?noload? state for over two days now, and the EchoLink website still shows our node as being a valid login. I?ve sent a service request in to EchoLink without response. My question is this, do I need to do more than ?noload? the EchoLink module so the EchoLink server won?t see us as a login?
>>>>>
>>>>> Thanks,
>>>>> Bob
>>>>> K6ECM
>>>>>
>>>>> Sent from iPad
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From k5cg at hamoperator.org  Fri Apr 20 18:09:36 2018
From: k5cg at hamoperator.org (K5CG)
Date: Fri, 20 Apr 2018 11:09:36 -0700 (PDT)
Subject: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
In-Reply-To: <f6316c05-c5cf-3324-a870-0333b2811c37@msgstor.com>
References: <1668746883.839888.1521948368252.JavaMail.zimbra@siminiuk.com>
 <f6316c05-c5cf-3324-a870-0333b2811c37@msgstor.com>
Message-ID: <1873020826.256067.1524247776707.JavaMail.zimbra@siminiuk.com>

I downloaded the raspberry pi latest http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip 

I followed the included readme file instructions and It booted fine but the asl-menu does not work correctly for the networking (static IP), and it doesn't set the hostname or domain name. After rebooting at the end of the process everything is the same as it was. Hostname is still "repeater" and IP is still DHCP. 

I seem to recall having this issue before on an older build. Is there a trick to get this to work or must it be done manually? 

Danny 
K5CG 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180420/5baec592/attachment.html>

From szingman at msgstor.com  Fri Apr 20 18:12:01 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Fri, 20 Apr 2018 14:12:01 -0400
Subject: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
In-Reply-To: <1873020826.256067.1524247776707.JavaMail.zimbra@siminiuk.com>
References: <1668746883.839888.1521948368252.JavaMail.zimbra@siminiuk.com>
 <f6316c05-c5cf-3324-a870-0333b2811c37@msgstor.com>
 <1873020826.256067.1524247776707.JavaMail.zimbra@siminiuk.com>
Message-ID: <320a3c47-aa64-593f-136b-bbcf5d1b00b7@msgstor.com>

Danny,
Did you do this before asl-menu?

sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel
sudo apt-get update
sudo apt-get upgrade -y
sudo reboot

Steve N4IRS

On 4/20/2018 2:09 PM, K5CG wrote:
> I downloaded?the raspberry pi 
> latest?http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip
>
> I followed the included readme file instructions and It booted fine 
> but the asl-menu does not work correctly for the networking (static 
> IP), and it doesn't set the hostname or domain name. After rebooting 
> at the end of the process everything is the same as it was. Hostname 
> is still "repeater" and IP is still DHCP.
>
> I seem to recall having this issue before on an older build. Is there 
> a trick to get this to work or must it be done manually?
>
> Danny
> K5CG
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180420/48925bdf/attachment.html>

From k5cg at hamoperator.org  Fri Apr 20 19:00:59 2018
From: k5cg at hamoperator.org (K5CG)
Date: Fri, 20 Apr 2018 12:00:59 -0700 (PDT)
Subject: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
Message-ID: <17040487.257079.1524250859268.JavaMail.zimbra@siminiuk.com>

Starting over. 

Brand new Pi 3 B + 
Formatted microSD card with SD Formatter. 
Re-flashed microSD card with Win32 Disk Imager 
Booted, "Resized root filesystem... rebooting" 

Logged in as repeater 
Changed password for "repeater" user 
sudo su - to become root 
passwd to set root user password 
Edited /etc/ssh/sshd_config to enable root login 
systemctl restart ssh to refresh sshd config 

ip addr 
192.168.1.225/24 (from DHCP) 
ssh to 192.168.1.225 as root user 

root at repeater:~# apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel 
raspberrypi-kernel-headers set on hold. 
raspberrypi-kernel set on hold. 

root at repeater:~# apt-get update 
Fetched 11.9 MB in 8s (1,361 kB/s) 
Reading package lists... Done 

root at repeater:~# apt-get upgrade -y 
Preparing... 
Unpacking... 
Yadda yadda... 
Setting up linux-libc-dev:armhf (4.9.82-1+deb9u3+rpi1) ... 
Setting up libicu57:armhf (57.1-6+deb9u2) ... 
Setting up raspi-config (20180406+1) ... 
Setting up perl (5.24.1-3+deb9u3) ... 
Setting up libssl1.0.2:armhf (1.0.2l-2+deb9u3) ... 
Processing triggers for libc-bin (2.24-11+deb9u3) ... 
Setting up libssl1.1:armhf (1.1.0f-3+deb9u2) ... 
Processing triggers for systemd (232-25+deb9u2) ... 
Setting up openssl (1.1.0f-3+deb9u2) ... 
Processing triggers for man-db (2.7.6.1-2) ... 
Setting up asl-asterisk-tools (1.01-20180226-10) ... 
Setting up libraspberrypi0 (1.20180417-1) ... 
Setting up libraspberrypi-doc (1.20180417-1) ... 
Setting up libraspberrypi-dev (1.20180417-1) ... 
Setting up libraspberrypi-bin (1.20180417-1) ... 
Processing triggers for libc-bin (2.24-11+deb9u3) ... 

root at repeater:~# reboot 

Now that the initial steps are done, do I run asl-menu as the user repeater or root? The readme isn't specific. 



From: "Steve Zingman" <szingman at msgstor.com> 
To: "Users of Asterisk app_rpt" <app_rpt-users at lists.allstarlink.org> 
Sent: Friday, April 20, 2018 1:12:01 PM 
Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01 

Danny, 
Did you do this before asl-menu? 

sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel 
sudo apt-get update 
sudo apt-get upgrade -y 
sudo reboot 

Steve N4IRS 

On 4/20/2018 2:09 PM, K5CG wrote: 



I downloaded the raspberry pi latest [ http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip | http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip ] 

I followed the included readme file instructions and It booted fine but the asl-menu does not work correctly for the networking (static IP), and it doesn't set the hostname or domain name. After rebooting at the end of the process everything is the same as it was. Hostname is still "repeater" and IP is still DHCP. 

I seem to recall having this issue before on an older build. Is there a trick to get this to work or must it be done manually? 

Danny 
K5CG 


_______________________________________________
App_rpt-users mailing list [ mailto:App_rpt-users at lists.allstarlink.org | App_rpt-users at lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 




_______________________________________________ 
App_rpt-users mailing list 
App_rpt-users at lists.allstarlink.org 
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" 
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180420/4b9dad0e/attachment.html>

From szingman at msgstor.com  Fri Apr 20 19:36:06 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Fri, 20 Apr 2018 15:36:06 -0400
Subject: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
In-Reply-To: <17040487.257079.1524250859268.JavaMail.zimbra@siminiuk.com>
References: <17040487.257079.1524250859268.JavaMail.zimbra@siminiuk.com>
Message-ID: <cd5032a8-12a5-13d5-7b2a-e97a9995595d@msgstor.com>

Run as root or with sudo

On 04/20/2018 03:00 PM, K5CG wrote:
> Starting over.
>
> Brand new Pi 3 B +
> Formatted microSD card with SD Formatter.
> Re-flashed microSD card with Win32 Disk Imager
> Booted, "Resized root filesystem... rebooting"
>
> Logged in as repeater
> Changed password for "repeater" user
> /sudo su -/? ? to become root
> /passwd/? ? to set root user password
> Edited /etc/ssh/sshd_config to enable root login
> /systemctl restart ssh/? ?to refresh sshd config
>
> ip addr
> 192.168.1.225/24 (from DHCP)
> ssh to 192.168.1.225 as root user
>
> root at repeater:~# apt-mark hold raspberrypi-kernel-headers 
> raspberrypi-kernel
> raspberrypi-kernel-headers set on hold.
> raspberrypi-kernel set on hold.
>
> root at repeater:~#apt-get update
> Fetched 11.9 MB in 8s (1,361 kB/s)
> Reading package lists... Done
>
> root at repeater:~# apt-get upgrade -y
> Preparing...
> Unpacking...
> Yadda yadda...
> Setting up linux-libc-dev:armhf (4.9.82-1+deb9u3+rpi1) ...
> Setting up libicu57:armhf (57.1-6+deb9u2) ...
> Setting up raspi-config (20180406+1) ...
> Setting up perl (5.24.1-3+deb9u3) ...
> Setting up libssl1.0.2:armhf (1.0.2l-2+deb9u3) ...
> Processing triggers for libc-bin (2.24-11+deb9u3) ...
> Setting up libssl1.1:armhf (1.1.0f-3+deb9u2) ...
> Processing triggers for systemd (232-25+deb9u2) ...
> Setting up openssl (1.1.0f-3+deb9u2) ...
> Processing triggers for man-db (2.7.6.1-2) ...
> Setting up asl-asterisk-tools (1.01-20180226-10) ...
> Setting up libraspberrypi0 (1.20180417-1) ...
> Setting up libraspberrypi-doc (1.20180417-1) ...
> Setting up libraspberrypi-dev (1.20180417-1) ...
> Setting up libraspberrypi-bin (1.20180417-1) ...
> Processing triggers for libc-bin (2.24-11+deb9u3) ...
>
> root at repeater:~# reboot
>
> Now that the initial steps are done, do I run asl-menu as the user 
> repeater or root? The readme isn't specific.
>
>
> ------------------------------------------------------------------------
> *From: *"Steve Zingman" <szingman at msgstor.com>
> *To: *"Users of Asterisk app_rpt" <app_rpt-users at lists.allstarlink.org>
> *Sent: *Friday, April 20, 2018 1:12:01 PM
> *Subject: *Re: [App_rpt-users] Announcing AllStarLink Asterisk version 
> 1.01
>
> Danny,
> Did you do this before asl-menu?
>
> sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel
> sudo apt-get update
> sudo apt-get upgrade -y
> sudo reboot
>
> Steve N4IRS
>
> On 4/20/2018 2:09 PM, K5CG wrote:
>
>     I downloaded?the raspberry pi latest
>     http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip
>
>     I followed the included readme file instructions and It booted
>     fine but the asl-menu does not work correctly for the networking
>     (static IP), and it doesn't set the hostname or domain name. After
>     rebooting at the end of the process everything is the same as it
>     was. Hostname is still "repeater" and IP is still DHCP.
>
>     I seem to recall having this issue before on an older build. Is
>     there a trick to get this to work or must it be done manually?
>
>     Danny
>     K5CG
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180420/076eefb2/attachment.html>

From lengriff at optimum.net  Sat Apr 21 15:36:29 2018
From: lengriff at optimum.net (lengriff at optimum.net)
Date: Sat, 21 Apr 2018 11:36:29 -0400 (Eastern Daylight Time)
Subject: [App_rpt-users] WinSCP root login
Message-ID: <5ADB5A7D.00008B.07040@LEAPER-PC>

I have added a password for root login,  and in sshd_config changed to
PermitRootLogin yes.
I can login as root locally with the correct password, but WinSCP says '
access denied '.
The auth.log shows: 
sshd[1643]: Pam_Unix(sshd:auth): authentication failure; logname= uid=0
euid=0 TTY=ssh ruser= rhost=192.168.39.121 user=root

Len
WB2HKK


From n3fe at repeater.net  Sat Apr 21 16:02:25 2018
From: n3fe at repeater.net (Corey Dean)
Date: Sat, 21 Apr 2018 12:02:25 -0400
Subject: [App_rpt-users] WinSCP root login
In-Reply-To: <5ADB5A7D.00008B.07040@LEAPER-PC>
References: <5ADB5A7D.00008B.07040@LEAPER-PC>
Message-ID: <D8C7CE6B-A11C-46F3-911E-0D1EEDEE734C@repeater.net>

Did you restart the sshd service?

Corey n3fe

Sent from my iPhone

> On Apr 21, 2018, at 11:36 AM, "lengriff at optimum.net" <lengriff at optimum.net> wrote:
> 
> I have added a password for root login,  and in sshd_config changed to
> PermitRootLogin yes.
> I can login as root locally with the correct password, but WinSCP says '
> access denied '.
> The auth.log shows: 
> sshd[1643]: Pam_Unix(sshd:auth): authentication failure; logname= uid=0
> euid=0 TTY=ssh ruser= rhost=192.168.39.121 user=root
> 
> Len
> WB2HKK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From szingman at msgstor.com  Sat Apr 21 16:05:47 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Sat, 21 Apr 2018 12:05:47 -0400
Subject: [App_rpt-users] WinSCP root login
In-Reply-To: <5ADB5A7D.00008B.07040@LEAPER-PC>
References: <5ADB5A7D.00008B.07040@LEAPER-PC>
Message-ID: <5f088d0a-4396-13c4-e518-9c8bee76ed73@msgstor.com>

Len,
When you say you can login locally do you mean via ssh or on the 
keyboard and screen?
Please show us your complete PermitRootLogin line from sshd_config.

Steve N4IRS

On 04/21/2018 11:36 AM, lengriff at optimum.net wrote:
> I have added a password for root login,  and in sshd_config changed to
> PermitRootLogin yes.
> I can login as root locally with the correct password, but WinSCP says '
> access denied '.
> The auth.log shows:
> sshd[1643]: Pam_Unix(sshd:auth): authentication failure; logname= uid=0
> euid=0 TTY=ssh ruser= rhost=192.168.39.121 user=root
>
> Len
> WB2HKK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From george at dyb.com  Sat Apr 21 16:38:27 2018
From: george at dyb.com (George Csahanin)
Date: Sat, 21 Apr 2018 11:38:27 -0500
Subject: [App_rpt-users] Pi versions...and Allstar (Pi-Zero
Message-ID: <388d92ad-5ced-3bf5-7f19-f093ba03b732@dyb.com>

Does this new release work on a Pi-Zero?

GeorgeC W2DB

2360, 2428, 28599

-- 
George Csahanin
10100 Carson Ranch Rd.
Crowley, TX 76036
682-708-5716 home
401-338-0568 cel



From kennisonjeff at gmail.com  Sun Apr 22 20:07:47 2018
From: kennisonjeff at gmail.com (Jeff Kennison)
Date: Sun, 22 Apr 2018 13:07:47 -0700
Subject: [App_rpt-users] Rasberry Pi3
Message-ID: <CA+3Rj6J1Y_wQ-fQRMZcbVpZ7M5PyjjsdUZTRV_-t=ud5BKtvVA@mail.gmail.com>

Just purchased Rasberry Pi3 and loaded OS. Im new to Allstar and am in need
of someone  to walk me thru the setup of software.
Thank You
Jeff Kennison
kennisonjeff at gmail.com
WB6IZC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180422/e4ca1cc7/attachment.html>

From bmeyer2929 at cox.net  Sun Apr 22 23:13:04 2018
From: bmeyer2929 at cox.net (BOB MEYER)
Date: Sun, 22 Apr 2018 18:13:04 -0500 (CDT)
Subject: [App_rpt-users] Can't link to AWS hosted AllStar Hub
Message-ID: <223235703.16158.1524438784236@myemail.cox.net>

Hi all:

I'm new to the list, but have been working for awhile with AllStar nodes. I'm trying to set up a virtual PC hub on Amazon's AWS for several of us to link to, but get a "connection failed" audio announcement when I attempt to connect from one of our other nodes. I can log in to the hub, go to the CLI prompt and connect to other nodes from it just fine using "rpt fun <mynode> *3<other node>".

The udp port 4569 has been defined to accept connections from 0.0.0.0/0, ::/0 . It appears to be registered properly and the update node list is running. One of the FAQs indicates there may be a need to have the port set manually on the registration server. The node is question is 47527.

I'm running ASL version: GIT 004b9dd built by root @ stretch-64 on a x86_64 running Linux on 2018-03-01 18:39:13 UTC

If it is an issue with Amazon's AWS, and there is another VPS that does work, I'm not opposed to switching. 

I really like AllStar, and have put together some scripts and an Arduino to monitor heatsink temperatures and battery voltage on our radio-based nodes, and then announce the info on them when prompted. It is a fun and flexible system. Kudos to all involved in the design and ongoing development/support!

Many thanks in advance for any guidance,

Bob Meyer KF5TVG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180422/054a034c/attachment.html>

From mike at midnighteng.com  Mon Apr 23 00:06:52 2018
From: mike at midnighteng.com (Mike)
Date: Sun, 22 Apr 2018 20:06:52 -0400
Subject: [App_rpt-users] Can't link to AWS hosted AllStar Hub
In-Reply-To: <223235703.16158.1524438784236@myemail.cox.net>
References: <223235703.16158.1524438784236@myemail.cox.net>
Message-ID: <op.zhwc9qkaf8cmrb@icool-w7d32>

Without really knowing what is going on...
I would say to look at your firewall/ iptables and while you are at it,
whitelist the ip's that will be using the system.
Make sure 4569 can pass as well as 'udp' 5060

...mike-kb8jnm

On Sun, 22 Apr 2018 19:13:04 -0400, BOB MEYER <bmeyer2929 at cox.net> wrote:

>
> Hi all:
>
> I'm new to the list, but have been working for awhile with AllStar  
> nodes. I'm trying to set up a virtual PC hub on Amazon's AWS for  
> >several of us to link to, but get a "connection failed" audio  
> announcement when I attempt to connect from one of our other nodes. I  
> >can log in to the hub, go to the CLI prompt and connect to other nodes  
> from it just fine using "rpt fun <mynode> *3<other node>".
>
> The udp port 4569 has been defined to accept connections from 0.0.0.0/0,  
> ::/0 . It appears to be registered properly and the update >node list is  
> running. One of the FAQs indicates there may be a need to have the port  
> set manually on the registration server. The >node is question is 47527.
>
> I'm running ASL version: GIT 004b9dd built by root @ stretch-64 on a  
> x86_64 running Linux on 2018-03-01 18:39:13 UTC
>
> If it is an issue with Amazon's AWS, and there is another VPS that does  
> work, I'm not opposed to switching.
> I really like AllStar, and have put together some scripts and an Arduino  
> to monitor heatsink temperatures and battery voltage on >our radio-based  
> nodes, and then announce the info on them when prompted. It is a fun and  
> flexible system. Kudos to all involved >in the design and ongoing  
> development/support!
>
> Many thanks in advance for any guidance,
>
> Bob Meyer KF5TVG



-- 
Using Opera's mail client: http://www.opera.com/mail/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180422/d5c0752f/attachment.html>

From app_rpt at marrold.co.uk  Mon Apr 23 00:16:47 2018
From: app_rpt at marrold.co.uk (2E0SIP)
Date: Mon, 23 Apr 2018 01:16:47 +0100
Subject: [App_rpt-users] Echolink Node ID prefixes
Message-ID: <CAC-Lcd8Esi-PWbBxNs_9S6zdewr6jgeA8txJPnsuzOTXnXmsYQ@mail.gmail.com>

Hi All,

I've noticed when an Echolink node connects / transmits to an AllStar node,
the Echolink node number is prefixed with a 3 in the archive file and
possibly elsewhere.

Does the '3' represent anything? I was wondering if Repeaters / Links /
Users have a different prefix.

Thanks

Matthew
2E0SIP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/e10f5d8b/attachment.html>

From app_rpt at marrold.co.uk  Mon Apr 23 00:19:39 2018
From: app_rpt at marrold.co.uk (2E0SIP)
Date: Mon, 23 Apr 2018 01:19:39 +0100
Subject: [App_rpt-users] Can't link to AWS hosted AllStar Hub
In-Reply-To: <op.zhwc9qkaf8cmrb@icool-w7d32>
References: <223235703.16158.1524438784236@myemail.cox.net>
 <op.zhwc9qkaf8cmrb@icool-w7d32>
Message-ID: <CAC-Lcd9aEnuDpQ7v+wZRzEG9r1LwqYSc16iY6fYNT3--dh54vg@mail.gmail.com>

Hi Bob,

AWS has it's own firewall in front of your EC2 instance. To confirm its
setup correctly, I'd suggest a packet capture.

Run the following in a terminal on your instance:

sudo tcpdump 'port 4569'

And then try to connect. See if you see any traffic going back and forth.

One other thing to keep in mind is a node will refuse connections if the
connecting node hasn't been registered in some time. So if you try to
connect with a new node, it will be rejected until the lists are updated.

Cheers


On Mon, Apr 23, 2018 at 1:06 AM, Mike <mike at midnighteng.com> wrote:

> Without really knowing what is going on...
> I would say to look at your firewall/ iptables and while you are at it,
> whitelist the ip's that will be using the system.
> Make sure 4569 can pass as well as 'udp' 5060
>
> ...mike-kb8jnm
>
> On Sun, 22 Apr 2018 19:13:04 -0400, BOB MEYER <bmeyer2929 at cox.net> wrote:
>
> Hi all:
>
> I'm new to the list, but have been working for awhile with AllStar nodes.
> I'm trying to set up a virtual PC hub on Amazon's AWS for several of us to
> link to, but get a "connection failed" audio announcement when I attempt to
> connect from one of our other nodes. I can log in to the hub, go to the CLI
> prompt and connect to other nodes from it just fine using "rpt fun <mynode>
> *3<other node>".
>
> The udp port 4569 has been defined to accept connections from 0.0.0.0/0,
> ::/0 . It appears to be registered properly and the update node list is
> running. One of the FAQs indicates there may be a need to have the port set
> manually on the registration server. The node is question is 47527.
>
> I'm running ASL version: GIT 004b9dd built by root @ stretch-64 on a
> x86_64 running Linux on 2018-03-01 18:39:13 UTC
>
> If it is an issue with Amazon's AWS, and there is another VPS that does
> work, I'm not opposed to switching.
>
> I really like AllStar, and have put together some scripts and an Arduino
> to monitor heatsink temperatures and battery voltage on our radio-based
> nodes, and then announce the info on them when prompted. It is a fun and
> flexible system. Kudos to all involved in the design and ongoing
> development/support!
>
> Many thanks in advance for any guidance,
>
> Bob Meyer KF5TVG
>
>
>
>
> --
> Using Opera's mail client: http://www.opera.com/mail/
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/19272bbb/attachment.html>

From k6ecm1 at gmail.com  Mon Apr 23 00:55:40 2018
From: k6ecm1 at gmail.com (Bob Pyke)
Date: Sun, 22 Apr 2018 17:55:40 -0700
Subject: [App_rpt-users] Echolink Node ID prefixes
In-Reply-To: <CAC-Lcd8Esi-PWbBxNs_9S6zdewr6jgeA8txJPnsuzOTXnXmsYQ@mail.gmail.com>
References: <CAC-Lcd8Esi-PWbBxNs_9S6zdewr6jgeA8txJPnsuzOTXnXmsYQ@mail.gmail.com>
Message-ID: <FD52B842-C574-4E53-8079-734E6A184903@gmail.com>

You may have noticed the Allstarlink list of nodes do not have any that begins with ?3? which is reserved for EchoLink nodes.

Thanks,
Bob
K6ECM
73


> On Apr 22, 2018, at 5:16 PM, 2E0SIP <app_rpt at marrold.co.uk> wrote:
> 
> Hi All,
> 
> I've noticed when an Echolink node connects / transmits to an AllStar node, the Echolink node number is prefixed with a 3 in the archive file and possibly elsewhere.
> 
> Does the '3' represent anything? I was wondering if Repeaters / Links / Users have a different prefix.
> 
> Thanks
> 
> Matthew
> 2E0SIP
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


From kuggie at kuggie.com  Mon Apr 23 01:41:22 2018
From: kuggie at kuggie.com (Kevin Custer)
Date: Sun, 22 Apr 2018 21:41:22 -0400
Subject: [App_rpt-users] Feature Announcement - -"New" audio filters for
	AllStarLink Asterisk
Message-ID: <c3f8f528-872e-b852-b380-1c3940fb6594@kuggie.com>

Feature Announcement:

One of the new features of AllStarLink Asterisk V1.01 is the addition of 
selectable audio filters.? These filters are for those who want even 
more fidelity over both the local repeat and network channel paths.? The 
filter rules were developed by Jeff DePolo WN3A, and were originally 
available in the Xelatec XIPAR release.? These filters are now standard, 
and were installed into AllStarLink Asterisk starting with V1.01.? To 
learn more, and take advantage of these new filters, please visit the 
AllStarLink Wiki.

<http://wiki.allstarlink.org/wiki/Audio_Filters>

For AllStarLink Inc.,
Kevin - W3KKC


From george at dyb.com  Mon Apr 23 03:30:03 2018
From: george at dyb.com (George J Csahanin)
Date: Sun, 22 Apr 2018 22:30:03 -0500
Subject: [App_rpt-users] problem starting asterisk with latest image
Message-ID: <7d7c5c01-e1c0-c439-523e-980bf45ec48d@dyb.com>

Have it all installed on a Pi-Zero and linux boots fine, wifi connects 
fine, asterisk shows "segmentation fault" and in the log files:

/Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Service hold-off 
time over, scheduling restart.//
//Apr 23 03:24:20 repeater systemd[1]: Stopped Asterisk PBX and 
telephony daemon.//
//Apr 23 03:24:20 repeater systemd[1]: Started Asterisk PBX and 
telephony daemon.//
//Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Main process 
exited, code=killed, status=11/SEGV//
//Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Control process 
exited, code=killed status=11//
//Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Unit entered 
failed state.//
//Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Failed with 
result 'signal'./

This repeats many times.
Really not sure where to start looking. I used ldd to see if libraries 
were ok, and all was fine:

/repeater at repeater:/var/log $ ldd /usr/sbin/asterisk//
//    /usr/lib/arm-linux-gnueabihf/libarmmem.so (0xb6f5b000)//
//    libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0xb6f48000)//
//    libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 
(0xb6f1f000)//
//    libtinfo.so.5 => /lib/arm-linux-gnueabihf/libtinfo.so.5 (0xb6ef0000)//
//    libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb6e71000)//
//    libresolv.so.2 => /lib/arm-linux-gnueabihf/libresolv.so.2 
(0xb6e4c000)//
//    libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb6d0d000)//
//    /lib/ld-linux-armhf.so.3 (0xb6f71000)//
//repeater at repeater:/var/log $ /

Anybody have any suggestions?

GeorgeC W2DB
2360, 28599
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180422/eda7c8c4/attachment.html>

From szingman at msgstor.com  Mon Apr 23 12:44:52 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Mon, 23 Apr 2018 08:44:52 -0400
Subject: [App_rpt-users] problem starting asterisk with latest image
In-Reply-To: <7d7c5c01-e1c0-c439-523e-980bf45ec48d@dyb.com>
References: <7d7c5c01-e1c0-c439-523e-980bf45ec48d@dyb.com>
Message-ID: <938ecd13-2322-6c90-e83f-3af83bef7b8b@msgstor.com>

George,
The Raspberry Pi image for AllStarLink 1.01 does not support the Pi Zero 
or the Pi1 (ARMV6)
When I get time, I'll build Debian packages for the ARMV6 (not a image) 
You will be able to install on a existing Raspbian Stretch image.
I do not have a time frame for this.

73, Steve N4IRS

On 4/22/2018 11:30 PM, George J Csahanin wrote:
> Have it all installed on a Pi-Zero and linux boots fine, wifi connects 
> fine, asterisk shows "segmentation fault" and in the log files:
>
> /Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Service 
> hold-off time over, scheduling restart.//
> //Apr 23 03:24:20 repeater systemd[1]: Stopped Asterisk PBX and 
> telephony daemon.//
> //Apr 23 03:24:20 repeater systemd[1]: Started Asterisk PBX and 
> telephony daemon.//
> //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Main process 
> exited, code=killed, status=11/SEGV//
> //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Control 
> process exited, code=killed status=11//
> //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Unit entered 
> failed state.//
> //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Failed with 
> result 'signal'./
>
> This repeats many times.
> Really not sure where to start looking. I used ldd to see if libraries 
> were ok, and all was fine:
>
> /repeater at repeater:/var/log $ ldd /usr/sbin/asterisk//
> //??? /usr/lib/arm-linux-gnueabihf/libarmmem.so (0xb6f5b000)//
> //??? libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0xb6f48000)//
> //??? libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 
> (0xb6f1f000)//
> //??? libtinfo.so.5 => /lib/arm-linux-gnueabihf/libtinfo.so.5 
> (0xb6ef0000)//
> //??? libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb6e71000)//
> //??? libresolv.so.2 => /lib/arm-linux-gnueabihf/libresolv.so.2 
> (0xb6e4c000)//
> //??? libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb6d0d000)//
> //??? /lib/ld-linux-armhf.so.3 (0xb6f71000)//
> //repeater at repeater:/var/log $ /
>
> Anybody have any suggestions?
>
> GeorgeC W2DB
> 2360, 28599
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/9d8276e1/attachment.html>

From szingman at msgstor.com  Mon Apr 23 12:49:19 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Mon, 23 Apr 2018 08:49:19 -0400
Subject: [App_rpt-users] ASL Updates
Message-ID: <bd09f285-33be-2b65-c480-f1d3e59a9b53@msgstor.com>

I have pushed the updates to the scripting used to support ASL on all 
platforms.
If you are running a Raspberry Pi:
sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel (If you 
have not already done this. Will not hurt to do it again.)
sudo apt-get update
sudo apt-get upgrade -y
sudo apt-get update
sudo reboot

This will upgrade you to the latest AllStarLink, supporting scripts and 
Raspbian.


All other platforms:
sudo apt-get update
sudo apt-get upgrade -y
sudo apt-get update
sudo reboot

73, Steve N4IRS



From lengriff at optimum.net  Mon Apr 23 12:52:23 2018
From: lengriff at optimum.net (lengriff at optimum.net)
Date: Mon, 23 Apr 2018 08:52:23 -0400 (Eastern Daylight Time)
Subject: [App_rpt-users] WinSCP root login fail
Message-ID: <5ADDD707.000024.09432@LEAPER-PC>

After setting PermitRootLogin to yes, and re-booting, I can login via the
local keyboard, but WinSCP responds with ' access denied '. 
The  ' Authentication stanza ' in sshd_config is:
#LoginGraceTime 2m
#PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
I do see the SSH service running when I do a service --status-all
If I try to install OpenSSH, it responds with ' client is already newest
version
Len
WB2HKK


From szingman at msgstor.com  Mon Apr 23 12:54:05 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Mon, 23 Apr 2018 08:54:05 -0400
Subject: [App_rpt-users] WinSCP root login fail
In-Reply-To: <5ADDD707.000024.09432@LEAPER-PC>
References: <5ADDD707.000024.09432@LEAPER-PC>
Message-ID: <e87c8b64-6d6d-0c78-581b-345e42d0458f@msgstor.com>

Change:
#PermitRootLogin yes
To:
PermitRootLogin yes

reboot

73, Steve N4IRS

On 4/23/2018 8:52 AM, lengriff at optimum.net wrote:
> After setting PermitRootLogin to yes, and re-booting, I can login via the
> local keyboard, but WinSCP responds with ' access denied '.
> The  ' Authentication stanza ' in sshd_config is:
> #LoginGraceTime 2m
> #PermitRootLogin yes
> #StrictModes yes
> #MaxAuthTries 6
> #MaxSessions 10
> I do see the SSH service running when I do a service --status-all
> If I try to install OpenSSH, it responds with ' client is already newest
> version
> Len
> WB2HKK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From loren at lorentedford.com  Mon Apr 23 14:22:55 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Mon, 23 Apr 2018 09:22:55 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
Message-ID: <20180423142303.398E41E2241@morty.keekles.org>

We had a scenario that occurred late Saturday night early Sunday Morning where the repeater locked its self wide open for over 18 hrs solid with no id?s according to witnesses I was away sleeping dealing with some medical on this end.. When we found out about it we immediately tuned to the frequency and found that the repeater was indeed locked open. I had Mark run out to the repeater site to shut it down and bring home the allstarlink box.. 

No signs of damage to motherboard ram or ssd we did look through the logs and couldn?t find anything that would even remotely cause a stuck ptt.. We were able to get the Archive directory downloaded since it was a separate drive and after looking through it.. Nothing showed their either.. 

Any ideas anyone? Anyone ever had this happen? This machine was Debian distro and was one of the earlier installations of the debian install .. It was up and running for almost 2 years no issues.. Reboots once every week.




Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/2a1b27a3/attachment.html>

From k6ecm1 at gmail.com  Mon Apr 23 14:37:06 2018
From: k6ecm1 at gmail.com (Bob Pyke)
Date: Mon, 23 Apr 2018 07:37:06 -0700
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <20180423142303.398E41E2241@morty.keekles.org>
References: <20180423142303.398E41E2241@morty.keekles.org>
Message-ID: <077A7CCB-80D3-4407-A3DF-F5A7E4570711@gmail.com>

We had this happen once with the RPi with DIAL. Sometimes computers hang-up, and if they are in transmit mode... oh well. We are installing a simplex radio with a simple controller that will allow us to  manually reboot the processor; an independent watchdog timer would work as well, but we also want to use the controller to report temperature.

Thanks,
Bob
k6ecm
73
Sent from my iPhone

> On Apr 23, 2018, at 7:22 AM, Loren Tedford <loren at lorentedford.com> wrote:
> 
> We had a scenario that occurred late Saturday night early Sunday Morning where the repeater locked its self wide open for over 18 hrs solid with no id?s according to witnesses I was away sleeping dealing with some medical on this end.. When we found out about it we immediately tuned to the frequency and found that the repeater was indeed locked open. I had Mark run out to the repeater site to shut it down and bring home the allstarlink box..
>  
> No signs of damage to motherboard ram or ssd we did look through the logs and couldn?t find anything that would even remotely cause a stuck ptt.. We were able to get the Archive directory downloaded since it was a separate drive and after looking through it.. Nothing showed their either..
>  
> Any ideas anyone? Anyone ever had this happen? This machine was Debian distro and was one of the earlier installations of the debian install .. It was up and running for almost 2 years no issues.. Reboots once every week.
>  
>  
>  
>  
> Loren Tedford (KC9ZHV) 
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>  
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/04e1e23c/attachment.html>

From kuggie at kuggie.com  Mon Apr 23 14:42:11 2018
From: kuggie at kuggie.com (Kevin Custer)
Date: Mon, 23 Apr 2018 10:42:11 -0400
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <20180423142303.398E41E2241@morty.keekles.org>
References: <20180423142303.398E41E2241@morty.keekles.org>
Message-ID: <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>

What is being used for the radio adapter?? If a URI or something 
similar, was the heartbeat LED flashing in this "stuck state"?




On 4/23/2018 10:22 AM, Loren Tedford wrote:
>
> We had a scenario that occurred late Saturday night early Sunday 
> Morning where the repeater locked its self wide open for over 18 hrs 
> solid with no id?s according to witnesses I was away sleeping dealing 
> with some medical on this end.. When we found out about it we 
> immediately tuned to the frequency and found that the repeater was 
> indeed locked open. I had Mark run out to the repeater site to shut it 
> down and bring home the allstarlink box..
>
> No signs of damage to motherboard ram or ssd we did look through the 
> logs and couldn?t find anything that would even remotely cause a stuck 
> ptt.. We were able to get the Archive directory downloaded since it 
> was a separate drive and after looking through it.. Nothing showed 
> their either..
>
> Any ideas anyone? Anyone ever had this happen? This machine was Debian 
> distro and was one of the earlier installations of the debian install 
> .. It was up and running for almost 2 years no issues.. Reboots once 
> every week.
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/39acc0c3/attachment.html>

From loren at lorentedford.com  Mon Apr 23 14:47:49 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Mon, 23 Apr 2018 09:47:49 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
References: <20180423142303.398E41E2241@morty.keekles.org>
 <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
Message-ID: <20180423144747.A13AA1E29FC@morty.keekles.org>

Good point Keven! We are using DmKeng URIx for both repeaters on the computer.. At the time of arrival out at the repeater site.. 2 meter repeater was not stuck in the open position but the UHF repeater was stuck open with Red light on on the URIx I do not believe the green heart beat was flashing we think it was solid.. Mark doesn?t remember other than the red led was solid..


Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Kevin Custer
Sent: Monday, April 23, 2018 9:43 AM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs

What is being used for the radio adapter?? If a URI or something similar, was the heartbeat LED flashing in this "stuck state"?




On 4/23/2018 10:22 AM, Loren Tedford wrote:
We had a scenario that occurred late Saturday night early Sunday Morning where the repeater locked its self wide open for over 18 hrs solid with no id?s according to witnesses I was away sleeping dealing with some medical on this end.. When we found out about it we immediately tuned to the frequency and found that the repeater was indeed locked open. I had Mark run out to the repeater site to shut it down and bring home the allstarlink box.. 
?
No signs of damage to motherboard ram or ssd we did look through the logs and couldn?t find anything that would even remotely cause a stuck ptt.. We were able to get the Archive directory downloaded since it was a separate drive and after looking through it.. Nothing showed their either.. 
?
Any ideas anyone? Anyone ever had this happen? This machine was Debian distro and was one of the earlier installations of the debian install .. It was up and running for almost 2 years no issues.. Reboots once every week.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/34d21db7/attachment.html>

From kuggie at kuggie.com  Mon Apr 23 15:04:02 2018
From: kuggie at kuggie.com (Kevin Custer)
Date: Mon, 23 Apr 2018 11:04:02 -0400
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <20180423144747.A13AA1E29FC@morty.keekles.org>
References: <20180423142303.398E41E2241@morty.keekles.org>
 <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
 <20180423144747.A13AA1E29FC@morty.keekles.org>
Message-ID: <9a545e83-c6c0-62af-172b-083f96929747@kuggie.com>

On 4/23/2018 10:47 AM, Loren Tedford wrote:
>
> Good point Keven! We are using DmKeng URIx for both repeaters on the 
> computer.. At the time of arrival out at the repeater site.. 2 meter 
> repeater was not stuck in the open position but the UHF repeater was 
> stuck open with Red light on on the URIx I do not believe the green 
> heart beat was flashing we think it was solid.. Mark doesn?t remember 
> other than the red led was solid..
>

There are no versions of Asterisk/app_rpt along with hardware that are 
stable enough to prevent this condition from ever happening.

You may want to consider a radio adapter that disables the PTT when the 
application has crashed or stopped, there's a hardware malfunction, or a 
communications issue with the radio adapter.? The URI doesn't currently 
have this functionality, but there are several others that do.

Kevin


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/3d18f353/attachment.html>

From kizzy at lusfiber.net  Mon Apr 23 15:51:58 2018
From: kizzy at lusfiber.net (Steve Mahler)
Date: Mon, 23 Apr 2018 10:51:58 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <9a545e83-c6c0-62af-172b-083f96929747@kuggie.com>
References: <20180423142303.398E41E2241@morty.keekles.org>
 <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
 <20180423144747.A13AA1E29FC@morty.keekles.org>
 <9a545e83-c6c0-62af-172b-083f96929747@kuggie.com>
Message-ID: <8f1b33dd-78de-a7ac-9506-f7dda47dcacf@lusfiber.net>

I haven't had a stuck PTT on either AllStar controller.? But, I do have 
a DTMF command that executes a Linux reboot.?? In rpt.conf it looks like ...

81234=cmd,/sbin/reboot

It seems to work OK.? It might work on PTT stuck if the receiver is 
still listening and some of the software is functional.

...STeve - KF5VH


On 4/23/2018 10:04 AM, Kevin Custer wrote:
> On 4/23/2018 10:47 AM, Loren Tedford wrote:
>>
>> Good point Keven! We are using DmKeng URIx for both repeaters on the 
>> computer.. At the time of arrival out at the repeater site.. 2 meter 
>> repeater was not stuck in the open position but the UHF repeater was 
>> stuck open with Red light on on the URIx I do not believe the green 
>> heart beat was flashing we think it was solid.. Mark doesn?t remember 
>> other than the red led was solid..
>>
>
> There are no versions of Asterisk/app_rpt along with hardware that are 
> stable enough to prevent this condition from ever happening.
>
> You may want to consider a radio adapter that disables the PTT when 
> the application has crashed or stopped, there's a hardware 
> malfunction, or a communications issue with the radio adapter. The URI 
> doesn't currently have this functionality, but there are several 
> others that do.
>
> Kevin
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/83168f08/attachment.html>

From app_rpt at marrold.co.uk  Mon Apr 23 16:15:12 2018
From: app_rpt at marrold.co.uk (2E0SIP)
Date: Mon, 23 Apr 2018 17:15:12 +0100
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <8f1b33dd-78de-a7ac-9506-f7dda47dcacf@lusfiber.net>
References: <20180423142303.398E41E2241@morty.keekles.org>
 <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
 <20180423144747.A13AA1E29FC@morty.keekles.org>
 <9a545e83-c6c0-62af-172b-083f96929747@kuggie.com>
 <8f1b33dd-78de-a7ac-9506-f7dda47dcacf@lusfiber.net>
Message-ID: <CAC-Lcd-jQ2MFjNs_TTGOsquo51zZXKY3YDctuWM0Od1g2drJWw@mail.gmail.com>

If its supported, you might want to configure a Timeout Timer (TOT) on the
repeater. This way even if the PTT is activated for long periods, the radio
will stop transmitting after the timer expires.

On Mon, Apr 23, 2018 at 4:51 PM, Steve Mahler <kizzy at lusfiber.net> wrote:

> I haven't had a stuck PTT on either AllStar controller.  But, I do have a
> DTMF command that executes a Linux reboot.   In rpt.conf it looks like ...
>
> 81234=cmd,/sbin/reboot
>
> It seems to work OK.  It might work on PTT stuck if the receiver is still
> listening and some of the software is functional.
>
> ...STeve - KF5VH
>
> On 4/23/2018 10:04 AM, Kevin Custer wrote:
>
> On 4/23/2018 10:47 AM, Loren Tedford wrote:
>
> Good point Keven! We are using DmKeng URIx for both repeaters on the
> computer.. At the time of arrival out at the repeater site.. 2 meter
> repeater was not stuck in the open position but the UHF repeater was stuck
> open with Red light on on the URIx I do not believe the green heart beat
> was flashing we think it was solid.. Mark doesn?t remember other than the
> red led was solid..
>
>
> There are no versions of Asterisk/app_rpt along with hardware that are
> stable enough to prevent this condition from ever happening.
>
> You may want to consider a radio adapter that disables the PTT when the
> application has crashed or stopped, there's a hardware malfunction, or a
> communications issue with the radio adapter.  The URI doesn't currently
> have this functionality, but there are several others that do.
>
> Kevin
>
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon> Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
> <#m_-3015673935599802372_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/00fc187e/attachment.html>

From szingman at msgstor.com  Mon Apr 23 16:43:25 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Mon, 23 Apr 2018 12:43:25 -0400
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <CAC-Lcd-jQ2MFjNs_TTGOsquo51zZXKY3YDctuWM0Od1g2drJWw@mail.gmail.com>
References: <20180423142303.398E41E2241@morty.keekles.org>
 <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
 <20180423144747.A13AA1E29FC@morty.keekles.org>
 <9a545e83-c6c0-62af-172b-083f96929747@kuggie.com>
 <8f1b33dd-78de-a7ac-9506-f7dda47dcacf@lusfiber.net>
 <CAC-Lcd-jQ2MFjNs_TTGOsquo51zZXKY3YDctuWM0Od1g2drJWw@mail.gmail.com>
Message-ID: <7428d3be-e119-abdb-43de-d133cde6bcee@msgstor.com>

Most of the exciters I use in repeater service, or hot spot for matter, 
have a TOT in the firmware. I crank them all the way up. Sometimes that 
is not as long as I would like but I feel better. As Kevin says, there 
are USB radio interfaces available with timers. The rules in the US may 
have changed but I remember a time when a repeater required a control 
channel on 220 MHz and above. But I'm old (licensed in 1969) and things 
change. The "belt and suspenders" approach can be a good thing.

73, Steve N4IRS

On 4/23/2018 12:15 PM, 2E0SIP wrote:
> If its supported, you might want to configure a Timeout Timer (TOT) on 
> the repeater. This way even if the PTT is activated for long periods, 
> the radio will stop transmitting after the timer expires.
>
> On Mon, Apr 23, 2018 at 4:51 PM, Steve Mahler <kizzy at lusfiber.net 
> <mailto:kizzy at lusfiber.net>> wrote:
>
>     I haven't had a stuck PTT on either AllStar controller.? But, I do
>     have a DTMF command that executes a Linux reboot.?? In rpt.conf it
>     looks like ...
>
>     81234=cmd,/sbin/reboot
>
>     It seems to work OK.? It might work on PTT stuck if the receiver
>     is still listening and some of the software is functional.
>
>     ...STeve - KF5VH
>
>
>     On 4/23/2018 10:04 AM, Kevin Custer wrote:
>>     On 4/23/2018 10:47 AM, Loren Tedford wrote:
>>>
>>>     Good point Keven! We are using DmKeng URIx for both repeaters on
>>>     the computer.. At the time of arrival out at the repeater site..
>>>     2 meter repeater was not stuck in the open position but the UHF
>>>     repeater was stuck open with Red light on on the URIx I do not
>>>     believe the green heart beat was flashing we think it was
>>>     solid.. Mark doesn?t remember other than the red led was solid..
>>>
>>
>>     There are no versions of Asterisk/app_rpt along with hardware
>>     that are stable enough to prevent this condition from ever
>>     happening.
>>
>>     You may want to consider a radio adapter that disables the PTT
>>     when the application has crashed or stopped, there's a hardware
>>     malfunction, or a communications issue with the radio adapter.?
>>     The URI doesn't currently have this functionality, but there are
>>     several others that do.
>>
>>     Kevin
>>
>>
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at lists.allstarlink.org
>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>
>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>     <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
>     	Virus-free. www.avast.com
>     <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
>
>
>     <#m_-3015673935599802372_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/4b362965/attachment.html>

From selkie2 at comcast.net  Mon Apr 23 17:03:24 2018
From: selkie2 at comcast.net (DuaneVT .)
Date: Mon, 23 Apr 2018 13:03:24 -0400
Subject: [App_rpt-users] Subject:  Repeater Stuck Locked open for 18 hrs
Message-ID: <CABhxdJnVyGrj1g8BShSnZ6mXL8s+de=d6STosaSjkKe1SCwW1w@mail.gmail.com>

We had a Motorola MSR-2000 lock on continuous due to a dropping-resistance
2N7000 FET PTT switch. It drifted low enough to keep the TX locked on but
too high to allow the hardware TOT card to see the "keying" and drop the
transmitter. The FET was on a homebrew FOB with 2N7000 PTT switch. Really
glad we have a continuous-duty RFPA!
73,
Duane KA1LM  42996
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/a0bf81f3/attachment.html>

From lengriff at optimum.net  Mon Apr 23 17:37:06 2018
From: lengriff at optimum.net (lengriff at optimum.net)
Date: Mon, 23 Apr 2018 13:37:06 -0400 (Eastern Daylight Time)
Subject: [App_rpt-users] WinSCP root login working
Message-ID: <5ADE19C2.00001B.09636@LEAPER-PC>

Thanks to all who replied. I should have realized the ' PermitRootLogin '
line was commented out!
WinSCP working fine now.

Len
WB2HKK


From loren at lorentedford.com  Mon Apr 23 18:07:28 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Mon, 23 Apr 2018 13:07:28 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <8f1b33dd-78de-a7ac-9506-f7dda47dcacf@lusfiber.net>
References: <20180423142303.398E41E2241@morty.keekles.org>
 <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
 <20180423144747.A13AA1E29FC@morty.keekles.org>
 <9a545e83-c6c0-62af-172b-083f96929747@kuggie.com>
 <8f1b33dd-78de-a7ac-9506-f7dda47dcacf@lusfiber.net>
Message-ID: <20180423180726.B27091E2241@morty.keekles.org>

Yeah I couldn?t get DTMF to pass to the repeater to do an old fashioned reboot to the system.. We might just have to put a tot timer back on the cm200?s What concerns me about this is how random it occurred again we had no issues up until Sunday makes me wonder if its not hardware that has gone bad some where along the line in process.. At the moment I am using another motherboard and processor along with new sticks of ram and a different SSD.. Considering doing some test over the next week prior to putting my repeaters back online.. 

If you wish to sort through what I have recovered and give me your thoughts and opinions of what went wrong please do! Here is the information that I have gathered.. Again was not able to access /var/log/ folder But I did capture all audio files from the archive directory..

The /var/log folder was my mistake I was trying to rush things..


Here are examples of my configs..

Rpt.conf
https://pastebin.com/WDAGgk7b
	
iax.conf
https://pastebin.com/eBErVMS4

modules.conf
https://pastebin.com/zKyZhfE1

Extensions.conf
https://pastebin.com/6hhzB5bc

usbradio.conf
https://pastebin.com/TppFdCEE

usbradio_tune_usb40875 (2 Meter Repeater)
https://pastebin.com/Gxqwe6Nx

usbradio_tune_usb29925 (70cm Repeater)
https://pastebin.com/yZF7cceh


Computer type and information:
Intel Atom D2700 @ 2.13GHz
Memory 4GB
Intel SSD 
Pico Power Supply 12

Here is Audio files and other customized scripts.
http://lorentedford.com/temp2017/RepeaterFailure/

Here are some photos.

Pico 12 Volt Atx power supply:
http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124036615.jpg
http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124020048.jpg
We assume it is working correctly it is powering the motherboard and hard drives all voltages seem to match everything.
DMKENG URI units:
http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124127518.jpg
http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124121409.jpg
http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_124115312.jpg
At the moment these units seem like they are functioning properly.

Motherboard and Ram Photos:
http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_123853044.jpg
http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_123902483.jpg
http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_123913316.jpg
At the moment I feel the motherboard and processor combination is working ok. Still doing some more tests.. I am looking for a Linux based Benchmark software to push this unit in order to find issues..
Intel SSD:
http://lorentedford.com/wp-content/uploads/2018/04/IMG_20180423_123924654.jpg
I am questioning this hard drive after all it is one of the earlier generation SSD?s 


Again I want to thank everyone for the help so far in ideas!


Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Steve Mahler
Sent: Monday, April 23, 2018 10:51 AM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs

I haven't had a stuck PTT on either AllStar controller.? But, I do have a DTMF command that executes a Linux reboot.?? In rpt.conf it looks like ...
81234=cmd,/sbin/reboot
It seems to work OK.? It might work on PTT stuck if the receiver is still listening and some of the software is functional.
...STeve - KF5VH

On 4/23/2018 10:04 AM, Kevin Custer wrote:
On 4/23/2018 10:47 AM, Loren Tedford wrote:
Good point Keven! We are using DmKeng URIx for both repeaters on the computer.. At the time of arrival out at the repeater site.. 2 meter repeater was not stuck in the open position but the UHF repeater was stuck open with Red light on on the URIx I do not believe the green heart beat was flashing we think it was solid.. Mark doesn?t remember other than the red led was solid..

There are no versions of Asterisk/app_rpt along with hardware that are stable enough to prevent this condition from ever happening. ? 

You may want to consider a radio adapter that disables the PTT when the application has crashed or stopped, there's a hardware malfunction, or a communications issue with the radio adapter.? The URI doesn't currently have this functionality, but there are several others that do.

Kevin





_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



Virus-free. www.avast.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/9cc845fd/attachment.html>

From irlp8720 at yahoo.com  Mon Apr 23 18:36:50 2018
From: irlp8720 at yahoo.com (Steve Agee)
Date: Mon, 23 Apr 2018 13:36:50 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <7428d3be-e119-abdb-43de-d133cde6bcee@msgstor.com>
References: <20180423142303.398E41E2241@morty.keekles.org>
 <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
 <20180423144747.A13AA1E29FC@morty.keekles.org>
 <9a545e83-c6c0-62af-172b-083f96929747@kuggie.com>
 <8f1b33dd-78de-a7ac-9506-f7dda47dcacf@lusfiber.net>
 <CAC-Lcd-jQ2MFjNs_TTGOsquo51zZXKY3YDctuWM0Od1g2drJWw@mail.gmail.com>
 <7428d3be-e119-abdb-43de-d133cde6bcee@msgstor.com>
Message-ID: <93c81491-6d37-8571-6233-de5f31d2ee39@yahoo.com>

Steve and the group:

It is still in the rules. Control has been broadened beyond a control 
radio to include fiber optic, telco, and wireline (to include internet). 
the radio can be any amateur frequency now, no longer required to be 
above 220 MHz.I believe you are referencing line (b):

?97.213 Telecommand of an amateur station.
An amateur station on or within 50 km of the Earth's surface may be 
under telecommand where:
(a) There is a radio or wireline control link between the control point 
and the station sufficient for the control operator to perform his/her 
duties. If radio, the control link must use an auxiliary station. A 
control link using a fiber optic cable or another telecommunication 
service is considered wireline.
(b) Provisions are incorporated to limit transmission by the station to 
a period of no more than 3 minutes in the event of malfunction in the 
control link.
(c) The station is protected against making, willfully or negligently, 
unauthorized transmissions.
(d) A photocopy of the station license and a label with the name, 
address, and telephone number of the station licensee and at least one 
designated control operator is posted in a conspicuous place at the 
station location.

N5ZUA

On 4/23/2018 11:43 AM, Steve Zingman wrote:
> Most of the exciters I use in repeater service, or hot spot for 
> matter, have a TOT in the firmware. I crank them all the way up. 
> Sometimes that is not as long as I would like but I feel better. As 
> Kevin says, there are USB radio interfaces available with timers. The 
> rules in the US may have changed but I remember a time when a repeater 
> required a control channel on 220 MHz and above. But I'm old (licensed 
> in 1969) and things change. The "belt and suspenders" approach can be 
> a good thing.
>
> 73, Steve N4IRS
>
> On 4/23/2018 12:15 PM, 2E0SIP wrote:
>> If its supported, you might want to configure a Timeout Timer (TOT) 
>> on the repeater. This way even if the PTT is activated for long 
>> periods, the radio will stop transmitting after the timer expires.
>>
>> On Mon, Apr 23, 2018 at 4:51 PM, Steve Mahler <kizzy at lusfiber.net 
>> <mailto:kizzy at lusfiber.net>> wrote:
>>
>>     I haven't had a stuck PTT on either AllStar controller.? But, I
>>     do have a DTMF command that executes a Linux reboot.?? In
>>     rpt.conf it looks like ...
>>
>>     81234=cmd,/sbin/reboot
>>
>>     It seems to work OK.? It might work on PTT stuck if the receiver
>>     is still listening and some of the software is functional.
>>
>>     ...STeve - KF5VH
>>
>>
>>     On 4/23/2018 10:04 AM, Kevin Custer wrote:
>>>     On 4/23/2018 10:47 AM, Loren Tedford wrote:
>>>>
>>>>     Good point Keven! We are using DmKeng URIx for both repeaters
>>>>     on the computer.. At the time of arrival out at the repeater
>>>>     site.. 2 meter repeater was not stuck in the open position but
>>>>     the UHF repeater was stuck open with Red light on on the URIx I
>>>>     do not believe the green heart beat was flashing we think it
>>>>     was solid.. Mark doesn?t remember other than the red led was
>>>>     solid..
>>>>
>>>
>>>     There are no versions of Asterisk/app_rpt along with hardware
>>>     that are stable enough to prevent this condition from ever
>>>     happening.
>>>
>>>     You may want to consider a radio adapter that disables the PTT
>>>     when the application has crashed or stopped, there's a hardware
>>>     malfunction, or a communications issue with the radio adapter.?
>>>     The URI doesn't currently have this functionality, but there are
>>>     several others that do.
>>>
>>>     Kevin
>>>
>>>
>>>
>>>
>>>     _______________________________________________
>>>     App_rpt-users mailing list
>>>     App_rpt-users at lists.allstarlink.org
>>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>>
>>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>>     <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
>>     	Virus-free. www.avast.com
>>     <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
>>
>>
>>     <#m_-3015673935599802372_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at lists.allstarlink.org
>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>
>>     To unsubscribe from this list please visit
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>     and scroll down to the bottom of the page. Enter your email
>>     address and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via
>>     email confirmation. If you have trouble unsubscribing, please
>>     send a message to the list detailing the problem.
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/e5d3cb82/attachment.html>

From loren at lorentedford.com  Mon Apr 23 18:44:57 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Mon, 23 Apr 2018 13:44:57 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <93c81491-6d37-8571-6233-de5f31d2ee39@yahoo.com>
References: <20180423142303.398E41E2241@morty.keekles.org>
 <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
 <20180423144747.A13AA1E29FC@morty.keekles.org>
 <9a545e83-c6c0-62af-172b-083f96929747@kuggie.com>
 <8f1b33dd-78de-a7ac-9506-f7dda47dcacf@lusfiber.net>
 <CAC-Lcd-jQ2MFjNs_TTGOsquo51zZXKY3YDctuWM0Od1g2drJWw@mail.gmail.com>
 <7428d3be-e119-abdb-43de-d133cde6bcee@msgstor.com>
 <93c81491-6d37-8571-6233-de5f31d2ee39@yahoo.com>
Message-ID: <20180423184456.9E4DD1E2241@morty.keekles.org>

That?s great Steve!! We thought we had our bases covered as well! We had dual network points provided to the repeater system.. The repeater is connected via Verizon Wireless through 4G LTE and backup systems range not only from DTMF commands to reset the system if needed but direct wifi point to point as well again our system still failed and required an onsite visit to shut the system down.. I suppose what I am saying is that you can have all the dedicated access you want to your site including dtmf controls and things do fail.. The bigger question to answer everything is why did the vpn portion of the service fail why did onsite Broadband connections fail why did the system lock open and become unresponsive..  As far as maintaining control of the system one can only do so much.. I am not going to pay some one to set at the repeater site for two years while we wait for it to fail again.. Its just not cost prohibitive in an Amateur radio hobby although everything has its expense example Verizon 60 a month Dedicated Broadband connection 80 a month Data center to manage the entire vpn services along with data center hub 90 a month.. again data center side never failed.. only the repeater its self failed.. In fact the system seemed to hang up the 41715 connection prior to the incident.. Which is odd.. 

Anyway thanks Steve for your thoughts on this! We will continue to look for better ways of controlling our Allstarlink system however I feel that having two dedicated internet access points to the system should have been enough..


Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Steve Agee
Sent: Monday, April 23, 2018 1:37 PM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs

Steve and the group:

It is still in the rules. Control has been broadened beyond a control radio to include fiber optic, telco, and wireline (to include internet). the radio can be any amateur frequency now, no longer required to be above 220 MHz.I believe you are referencing line (b):

?97.213 Telecommand of an amateur station. 
An amateur station on or within 50 km of the Earth's surface may be under telecommand where: 
(a) There is a radio or wireline control link between the control point and the station sufficient for the control operator to perform his/her duties. If radio, the control link must use an auxiliary station. A control link using a fiber optic cable or another telecommunication service is considered wireline. 
(b) Provisions are incorporated to limit transmission by the station to a period of no more than 3 minutes in the event of malfunction in the control link. 
(c) The station is protected against making, willfully or negligently, unauthorized transmissions. 
(d) A photocopy of the station license and a label with the name, address, and telephone number of the station licensee and at least one designated control operator is posted in a conspicuous place at the station location.

N5ZUA
On 4/23/2018 11:43 AM, Steve Zingman wrote:
Most of the exciters I use in repeater service, or hot spot for matter, have a TOT in the firmware. I crank them all the way up. Sometimes that is not as long as I would like but I feel better. As Kevin says, there are USB radio interfaces available with timers. The rules in the US may have changed but I remember a time when a repeater required a control channel on 220 MHz and above. But I'm old (licensed in 1969) and things change. The "belt and suspenders" approach can be a good thing.

73, Steve N4IRS
On 4/23/2018 12:15 PM, 2E0SIP wrote:
If its supported, you might want to configure a Timeout Timer (TOT) on the repeater. This way even if the PTT is activated for long periods, the radio will stop transmitting after the timer expires.

On Mon, Apr 23, 2018 at 4:51 PM, Steve Mahler <kizzy at lusfiber.net> wrote:
I haven't had a stuck PTT on either AllStar controller.? But, I do have a DTMF command that executes a Linux reboot.?? In rpt.conf it looks like ...
81234=cmd,/sbin/reboot
It seems to work OK.? It might work on PTT stuck if the receiver is still listening and some of the software is functional.
...STeve - KF5VH

On 4/23/2018 10:04 AM, Kevin Custer wrote:
On 4/23/2018 10:47 AM, Loren Tedford wrote:
Good point Keven! We are using DmKeng URIx for both repeaters on the computer.. At the time of arrival out at the repeater site.. 2 meter repeater was not stuck in the open position but the UHF repeater was stuck open with Red light on on the URIx I do not believe the green heart beat was flashing we think it was solid.. Mark doesn?t remember other than the red led was solid..

There are no versions of Asterisk/app_rpt along with hardware that are stable enough to prevent this condition from ever happening. ? 

You may want to consider a radio adapter that disables the PTT when the application has crashed or stopped, there's a hardware malfunction, or a communications issue with the radio adapter.? The URI doesn't currently have this functionality, but there are several others that do.

Kevin




_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



Virus-free. www.avast.com 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 




_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 




_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/21b4ea2b/attachment.html>

From bmeyer2929 at cox.net  Mon Apr 23 18:46:24 2018
From: bmeyer2929 at cox.net (BOB MEYER)
Date: Mon, 23 Apr 2018 13:46:24 -0500 (CDT)
Subject: [App_rpt-users] Can't link to AWS hosted AllStar Hub
In-Reply-To: <mailman.3.1524499201.3942.app_rpt-users@lists.allstarlink.org>
References: <mailman.3.1524499201.3942.app_rpt-users@lists.allstarlink.org>
Message-ID: <672083978.11264.1524509185198@myemail.cox.net>

Many thanks to those that responded. I didn't know about the tcpdump cmd, so thanks for the tip. I am indeed receiving udp 4569 traffic on the AWS-based node. I also added the 5060 udp port, and tried tcpdump 'udp 5060' but saw no traffic on that port. I don't think SIP is enabled by default on AllStar, and had seen no recommendations in the setup info, but thought it worth a try.

An additional bit of info: When the connection from a radio-based node fails, the CLI on it shows a message about "Auto-congesting call due to slow response". The same radio-based node can connect to other nodes, such as 2000, with no problem. I assume now, that the firewall/port configuration is not the issue, but something else. I see there are several wait timings in the rpt.conf file. I not sure if one of those is related to giving up too soon when the connection is attempted. 

Any other thoughts as to what might be going on? Has anyone been successful on another VPS?

Thanks in advance,
Bob KF5TVG

> Message: 2
> Date: Sun, 22 Apr 2018 18:13:04 -0500 (CDT)
> From: BOB MEYER <bmeyer2929 at cox.net>
> To: app rpt <app_rpt-users at lists.allstarlink.org>
> Subject: [App_rpt-users] Can't link to AWS hosted AllStar Hub
> Message-ID: <223235703.16158.1524438784236 at myemail.cox.net>
> Content-Type: text/plain; charset="utf-8"
> 
> Hi all:
> 
> I'm new to the list, but have been working for awhile with AllStar nodes. I'm trying to set up a virtual PC hub on Amazon's AWS for several of us to link to, but get a "connection failed" audio announcement when I attempt to connect from one of our other nodes. I can log in to the hub, go to the CLI prompt and connect to other nodes from it just fine using "rpt fun <mynode> *3<other node>".
> 
> The udp port 4569 has been defined to accept connections from 0.0.0.0/0, ::/0 . It appears to be registered properly and the update node list is running. One of the FAQs indicates there may be a need to have the port set manually on the registration server. The node is question is 47527.
> 
> I'm running ASL version: GIT 004b9dd built by root @ stretch-64 on a x86_64 running Linux on 2018-03-01 18:39:13 UTC
> 
> If it is an issue with Amazon's AWS, and there is another VPS that does work, I'm not opposed to switching. 
> 
> I really like AllStar, and have put together some scripts and an Arduino to monitor heatsink temperatures and battery voltage on our radio-based nodes, and then announce the info on them when prompted. It is a fun and flexible system. Kudos to all involved in the design and ongoing development/support!
> 
> Many thanks in advance for any guidance,
> 
> Bob Meyer KF5TVG
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180422/054a034c/attachment-0001.html>
> 
> ------------------------------
> 
> Message: 3
> Date: Sun, 22 Apr 2018 20:06:52 -0400
> From: Mike <mike at midnighteng.com>
> To: "Users of Asterisk app_rpt" <app_rpt-users at lists.allstarlink.org>
> Subject: Re: [App_rpt-users] Can't link to AWS hosted AllStar Hub
> Message-ID: <op.zhwc9qkaf8cmrb at icool-w7d32>
> Content-Type: text/plain; charset="iso-8859-15"; Format="flowed";
> 	DelSp="yes"
> 
> Without really knowing what is going on...
> I would say to look at your firewall/ iptables and while you are at it,
> whitelist the ip's that will be using the system.
> Make sure 4569 can pass as well as 'udp' 5060
> 
> ...mike-kb8jnm
> 

> Message: 5
> Date: Mon, 23 Apr 2018 01:19:39 +0100
> From: 2E0SIP <app_rpt at marrold.co.uk>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> Subject: Re: [App_rpt-users] Can't link to AWS hosted AllStar Hub
> Message-ID:
> 	<CAC-Lcd9aEnuDpQ7v+wZRzEG9r1LwqYSc16iY6fYNT3--dh54vg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Hi Bob,
> 
> AWS has it's own firewall in front of your EC2 instance. To confirm its
> setup correctly, I'd suggest a packet capture.
> 
> Run the following in a terminal on your instance:
> 
> sudo tcpdump 'port 4569'
> 
> And then try to connect. See if you see any traffic going back and forth.
> 
> One other thing to keep in mind is a node will refuse connections if the
> connecting node hasn't been registered in some time. So if you try to
> connect with a new node, it will be rejected until the lists are updated.
> 
> Cheers
> 
> 
> On Mon, Apr 23, 2018 at 1:06 AM, Mike <mike at midnighteng.com> wrote:
> 
> > Without really knowing what is going on...
> > I would say to look at your firewall/ iptables and while you are at it,
> > whitelist the ip's that will be using the system.
> > Make sure 4569 can pass as well as 'udp' 5060
> >
> > ...mike-kb8jnm
> >


From kb4fxc at inttek.net  Mon Apr 23 20:58:41 2018
From: kb4fxc at inttek.net (David McGough)
Date: Mon, 23 Apr 2018 16:58:41 -0400 (EDT)
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <20180423180726.B27091E2241@morty.keekles.org>
Message-ID: <Pine.LNX.4.44.1804231652340.32361-100000@goliath.inttek.net>


Hi Loren,

Do you know about what time on Sunday the lock-up started?

...Just curious. 

73, David KB4FXC


On Mon, 23 Apr 2018, Loren Tedford wrote:

> Yeah I couldn't get DTMF to pass to the repeater to do an old fashioned 
reboot to the system.. We might just have to put a tot timer back on the 
cm200's What concerns me about this is how random it occurred again we 
had no issues up until Sunday makes me wonder if its not hardware that 
has gone bad some where along the line in process.. At the moment I am 
using another motherboard and processor along with new sticks of ram and 
a different SSD.. Considering doing some test over the next week prior to 
putting my repeaters back online.. 
> 
> If you wish to sort through what I have recovered and give me your 
thoughts and opinions of what went wrong please do! Here is the 
information that I have gathered.. Again was not able to access /var/log/ 
folder But I did capture all audio files from the archive directory..
> 
> The /var/log folder was my mistake I was trying to rush things..
> 
> 
<snip>
> 
> 
> Loren Tedford (KC9ZHV) 
> Phone Main: 1+ (631) 686 ??? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
> 
<snip>




From app_rpt at marrold.co.uk  Mon Apr 23 23:03:36 2018
From: app_rpt at marrold.co.uk (2E0SIP)
Date: Tue, 24 Apr 2018 00:03:36 +0100
Subject: [App_rpt-users] Getting details of AllStar Node from the Node ID
Message-ID: <CAC-Lcd9okihP5nnyXNHD-KkKvXn1Ffnvk5dOCz_3yG=UXtVC3Q@mail.gmail.com>

Hi All,

Is there an 'API' (Either on the local node or the web) for getting info on
an individual AllStar node, from the node number? E.G Call Sign / Location
etc

Or, a list in CSV / JSON format?

There's a list here - https://allstarlink.org/nodelist.php But from
experience, parsing HTML tables is a pain.

Thanks

Matthew
2E0SIP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/24b9a163/attachment.html>

From Benjamin at Project23D.com  Mon Apr 23 23:30:40 2018
From: Benjamin at Project23D.com (Benjamin Naber)
Date: Mon, 23 Apr 2018 18:30:40 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs - > FIX
In-Reply-To: <Pine.LNX.4.44.1804231652340.32361-100000@goliath.inttek.net>
References: <Pine.LNX.4.44.1804231652340.32361-100000@goliath.inttek.net>
Message-ID: <1524526240.2122.2.camel@Project23D.com>

DIAL 8.x on a dell latitude 530 laptop and RA-35


in the last three years of running, never once was there an issue with
ASL that I did not cause.

RPi's are great and all that, I guess, but, duuuuude, they suck for
reliability!

if I were to throw darts, I would venture to say 85% of the issues here
and "there" and directly RPi and crappy sound fob IC related.

By *NO* means is this discrediting the authors of ASL, a lot of work
has been put forth to deal with silly Pi's... aka SD card eaters!

Saving 20W of power is not worth the headache. 



~Benjamin, KB9LFZ


On Mon, 2018-04-23 at 16:58 -0400, David McGough wrote:
> Hi Loren,
> 
> Do you know about what time on Sunday the lock-up started?
> 
> ...Just curious.?
> 
> 73, David KB4FXC
> 
> 
> On Mon, 23 Apr 2018, Loren Tedford wrote:
> 
> > Yeah I couldn't get DTMF to pass to the repeater to do an old
> > fashioned?
> 
> reboot to the system.. We might just have to put a tot timer back on
> the?
> cm200's What concerns me about this is how random it occurred again
> we?
> had no issues up until Sunday makes me wonder if its not hardware
> that?
> has gone bad some where along the line in process.. At the moment I
> am?
> using another motherboard and processor along with new sticks of ram
> and?
> a different SSD.. Considering doing some test over the next week
> prior to?
> putting my repeaters back online..?
> > 
> > If you wish to sort through what I have recovered and give me your?
> 
> thoughts and opinions of what went wrong please do! Here is the?
> information that I have gathered.. Again was not able to access
> /var/log/?
> folder But I did capture all audio files from the archive directory..
> > 
> > The /var/log folder was my mistake I was trying to rush things..
> > 
> > 
> 
> <snip>
> > 
> > 
> > Loren Tedford (KC9ZHV)?
> > Phone Main: 1+ (631) 686 ??? 8878 Option 1
> > Fax: 1-618-551-2755
> > Email: loren at lorentedford.com
> > Email: KC9ZHV at KC9ZHV.com
> > http://www.lorentedford.com
> > http://www.kc9zhv.com
> > http://forum.kc9zhv.com
> > http://hub.kc9zhv.com
> > http://Ltcraft.net
> > http://voipham.com
> > 
> 
> <snip>
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.o
> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a
> message to the list detailing the problem.?


From kb4fxc at inttek.net  Tue Apr 24 02:16:48 2018
From: kb4fxc at inttek.net (David McGough)
Date: Mon, 23 Apr 2018 22:16:48 -0400 (EDT)
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs - > FIX
In-Reply-To: <1524526240.2122.2.camel@Project23D.com>
Message-ID: <Pine.LNX.4.44.1804232159110.32361-100000@goliath.inttek.net>


Benjamin,

LOL.... I think you missed the original post. See: 
http://lists.allstarlink.org/pipermail/app_rpt-users/2018-April/018382.html

This discussion was about an embedded PC with these specs (NOT an RPi2/3):

Computer type and information:
Intel Atom D2700 @ 2.13GHz
Memory 4GB
Intel SSD 
Pico Power Supply 12

As embedded systems go, that would appear to be a very reasonable setup. 
I've got many with roughly the same specs. And, in general, they don't 
skip a beat.

As for RPi3B boards, well, I've replaced all my embedded AllStar PC's at 
this point. And, the RPi3B's don't skip a beat either. In fact, I'm seeing 
even better reliability with the Pi's than with the PC's. But, it didn't 
start out that way. I figured where the weaknesses were with the RPi 
systems and solved those problems. Now, my RPi3B boards run until I reboot 
them, wherever they're located...Like this system at the top of a TV 
tower:

[root at repeater-444850 asterisk]# uptime
 22:10:13 up 183 days, 10:58,  1 user,  load average: 0.12, 0.05, 0.03
[root at repeater-444850 asterisk]# cpu_stats.sh 

		Current CPU stats
		-----------------
cpuinfo_cur_freq = 1200 MHz.
cpuinfo_max_freq = 1200 MHz.
cpuinfo_min_freq = 1200 MHz.
cpuinfo_transition_latency = 355000
cpu frequency ondemand up threshold = 95
cpu frequency scaling governor = ondemand
Current CPU Temperature = 41C / 105F
Core volt=1.2500V
sdram core volt=1.2000V
sdram I/O volt=1.2000V
sdram PHY volt=1.2250V
BogoMIPS : 38.40 X 4 CORES




73, David KB4FXC




On Mon, 23 Apr 2018, Benjamin Naber wrote:

> DIAL 8.x on a dell latitude 530 laptop and RA-35


in the last three years of running, never once was there an issue with
ASL that I did not cause.

RPi's are great and all that, I guess, but, duuuuude, they suck for
reliability!

if I were to throw darts, I would venture to say 85% of the issues here
and "there" and directly RPi and crappy sound fob IC related.

By *NO* means is this discrediting the authors of ASL, a lot of work
has been put forth to deal with silly Pi's... aka SD card eaters!

Saving 20W of power is not worth the headache. 



~Benjamin, KB9LFZ


On Mon, 2018-04-23 at 16:58 -0400, David McGough wrote:
> Hi Loren,
> 
> Do you know about what time on Sunday the lock-up started?
> 
> ...Just curious.??
> 
> 73, David KB4FXC
> 
> 
> On Mon, 23 Apr 2018, Loren Tedford wrote:
> 
> > Yeah I couldn't get DTMF to pass to the repeater to do an old
> > fashioned??
> 
> reboot to the system.. We might just have to put a tot timer back on
> the??
> cm200's What concerns me about this is how random it occurred again
> we??
> had no issues up until Sunday makes me wonder if its not hardware
> that??
> has gone bad some where along the line in process.. At the moment I
> am??
> using another motherboard and processor along with new sticks of ram
> and??
> a different SSD.. Considering doing some test over the next week
> prior to??
> putting my repeaters back online..??
> > 
> > If you wish to sort through what I have recovered and give me your??
> 
> thoughts and opinions of what went wrong please do! Here is the??
> information that I have gathered.. Again was not able to access
> /var/log/??
> folder But I did capture all audio files from the archive directory..
> > 
> > The /var/log folder was my mistake I was trying to rush things..
> > 
> > 
> 
> <snip>
> > 
> > 
> > Loren Tedford (KC9ZHV)??
> > Phone Main: 1+ (631) 686 ???????? 8878 Option 1
> > Fax: 1-618-551-2755
> > Email: loren at lorentedford.com
> > Email: KC9ZHV at KC9ZHV.com
> > http://www.lorentedford.com
> > http://www.kc9zhv.com
> > http://forum.kc9zhv.com
> > http://hub.kc9zhv.com
> > http://Ltcraft.net
> > http://voipham.com
> > 
> 
> <snip>
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.o
> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a
> message to the list detailing the problem.??
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



From selkie2 at comcast.net  Tue Apr 24 16:46:41 2018
From: selkie2 at comcast.net (DuaneVT .)
Date: Tue, 24 Apr 2018 12:46:41 -0400
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
Message-ID: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>

Radio Control was referenced as "Auxiliary Service".

Per Part 97 : Sec. 97.201 Auxiliary station
------------------------------
(a) Any amateur station licensed to a holder of a Technician, General,
Advanced or Amateur Extra Class operator license may be an auxiliary
station. A holder of a Technician, General, Advanced or Amateur Extra Class
operator license may be the control operator of an auxiliary station,
subject to the privileges of the class of operator license held.

(b) An auxiliary station may transmit only on the 2 m and shorter
wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz,
222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.

So 2 meters and above now.

73, Duane KA1LM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/580ba6e3/attachment.html>

From loren at lorentedford.com  Tue Apr 24 16:50:58 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Tue, 24 Apr 2018 11:50:58 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
Message-ID: <20180424165058.6B7701E0327@morty.keekles.org>

Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don?t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..

We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..

Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: DuaneVT .
Sent: Tuesday, April 24, 2018 11:46 AM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs

Radio Control was referenced as "Auxiliary Service".

Per?Part 97 :?Sec. 97.201 Auxiliary station

(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz, 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/a7513fcb/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: C229A28DA3F84728B981DB3E4F3E722A.png
Type: image/png
Size: 149 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/a7513fcb/attachment.png>

From szingman at msgstor.com  Tue Apr 24 17:14:08 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Tue, 24 Apr 2018 13:14:08 -0400
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <20180424165058.6B7701E0327@morty.keekles.org>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
 <20180424165058.6B7701E0327@morty.keekles.org>
Message-ID: <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>

I'm a little confused, Did Asterisk fail or memory and possibly a 
motherboard?

On 4/24/2018 12:50 PM, Loren Tedford wrote:
>
> Well technically it could have been controlled by the two meter 
> repeater had the two meter repeater responded under normal 
> circumstances.. What I am going to do for future repeater operations 
> is to put TOT timers on the radio and I don?t care whether individuals 
> on Autopatch that are calling Emergency services get disconnect etc 
> because of radio tot.. No longer am I going to rely on asterisk to 
> handle the TOT primarly.. Because of this experience.. We now know 
> that we have fried some memory and possibly a motherboard but my 
> testing at this point is stopping.. Moving forward with new gear..
>
> We originally turned off the TOT timer in the radios because of 
> scenario involving autopatch and calling during severe weather..
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
> *From: *DuaneVT . <mailto:selkie2 at comcast.net>
> *Sent: *Tuesday, April 24, 2018 11:46 AM
> *To: *app_rpt-users at lists.allstarlink.org 
> <mailto:app_rpt-users at lists.allstarlink.org>
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
> Radio Control was referenced as "Auxiliary Service".
>
> Per *Part 97 : **Sec. 97.201 Auxiliary station*
>
> (a) Any amateur station licensed to a holder of a Technician, General, 
> Advanced or Amateur Extra Class operator license may be an auxiliary 
> station. A holder of a Technician, General, Advanced or Amateur Extra 
> Class operator license may be the control operator of an auxiliary 
> station, subject to the privileges of the class of operator license held.
>
> (b) An auxiliary station may transmit only on the 2 m and shorter 
> wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 
> MHz, 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
>
> So 2 meters and above now.
>
> 73, Duane KA1LM
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/a1054332/attachment.html>

From loren at lorentedford.com  Tue Apr 24 17:25:21 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Tue, 24 Apr 2018 12:25:21 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
 <20180424165058.6B7701E0327@morty.keekles.org>
 <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>
Message-ID: <20180424172521.297F51E0941@morty.keekles.org>

The way it stands at the moment I am not entirely sure? Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn?t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn?t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue.. 

Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Steve Zingman
Sent: Tuesday, April 24, 2018 12:14 PM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs

I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don?t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
?
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
?
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
?
From: DuaneVT .
Sent: Tuesday, April 24, 2018 11:46 AM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
?
Radio Control was referenced as "Auxiliary Service".
?
Per?Part 97 :?Sec. 97.201 Auxiliary station

(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz, 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
?
?



_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/90e369cf/attachment.html>

From petem001 at gmail.com  Tue Apr 24 19:08:27 2018
From: petem001 at gmail.com (Pierre Martel)
Date: Tue, 24 Apr 2018 15:08:27 -0400
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <20180424172521.297F51E0941@morty.keekles.org>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
 <20180424165058.6B7701E0327@morty.keekles.org>
 <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>
 <20180424172521.297F51E0941@morty.keekles.org>
Message-ID: <CAL8dJwrBM_p9pApbb6Kf8qmw=9d9zYMZ8+c49v1zMiHyEfM-tw@mail.gmail.com>

I really dislike mechanical TOT. Why not use a small RP? that can monitor
the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the
MB, power off the radios, power off/on the router.



A simple circuit that have a phototransistor that drive an input of the rpi
would be easy to install, just use 2 small tube that cover  the geen  led
to feed the phototransistor (maybe a simple straw would do!)  . pretty sur
that just a npn phototransistor could be driven directly with just a small
pull up resistor to make the sensing part of the circuit and the rest is
just simple coding either in python or in C.  Could even had automation
like ping fail that reset the router/wifi link. you could even monitor the
ASL system for activity and compare the 'software state' to the hardware
state.


2018-04-24 13:25 GMT-04:00 Loren Tedford <loren at lorentedford.com>:

> The way it stands at the moment I am not entirely sure? Here is what I
> found during reinstallation the Memory failed a self check that I ran while
> putting Windows on it to stress test the machine.. The hard drive doesn?t
> seem to want to take any data at this point.. But before attempting to
> format reinstall on this machine the system booted still.. My guess is some
> thing mechanical could have caused Asterisks to have failed at this point..
> Honestly it seems to be a bit of a waste of my time to continue working on
> this machine when I have a second one exact specs sitting here ready to
> go.. We are doing the just in case TOT timer in the radios and this will
> affect autopatch users and anyone else that doesn?t let the system fully
> drop.. This is for my own re assurance that I have to the best of my
> ability solved the issue..
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *Steve Zingman <szingman at msgstor.com>
> *Sent: *Tuesday, April 24, 2018 12:14 PM
> *To: *app_rpt-users at lists.allstarlink.org
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
>
>
> I'm a little confused, Did Asterisk fail or memory and possibly a
> motherboard?
>
> On 4/24/2018 12:50 PM, Loren Tedford wrote:
>
> Well technically it could have been controlled by the two meter repeater
> had the two meter repeater responded under normal circumstances.. What I am
> going to do for future repeater operations is to put TOT timers on the
> radio and I don?t care whether individuals on Autopatch that are calling
> Emergency services get disconnect etc because of radio tot.. No longer am I
> going to rely on asterisk to handle the TOT primarly.. Because of this
> experience.. We now know that we have fried some memory and possibly a
> motherboard but my testing at this point is stopping.. Moving forward with
> new gear..
>
>
>
> We originally turned off the TOT timer in the radios because of scenario
> involving autopatch and calling during severe weather..
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *DuaneVT . <selkie2 at comcast.net>
> *Sent: *Tuesday, April 24, 2018 11:46 AM
> *To: *app_rpt-users at lists.allstarlink.org
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
>
>
> Radio Control was referenced as "Auxiliary Service".
>
>
>
> Per *Part 97 : **Sec. 97.201 Auxiliary station*
>
> [image: cid:image001.png at 01D3DBC2.81D4ED70]
>
> (a) Any amateur station licensed to a holder of a Technician, General,
> Advanced or Amateur Extra Class operator license may be an auxiliary
> station. A holder of a Technician, General, Advanced or Amateur Extra Class
> operator license may be the control operator of an auxiliary station,
> subject to the privileges of the class of operator license held.
>
> (b) An auxiliary station may transmit only on the 2 m and shorter
> wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz,
> 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
>
> So 2 meters and above now.
>
> 73, Duane KA1LM
>
>
>
>
>
>
>
>
> _______________________________________________
>
> App_rpt-users mailing list
>
> App_rpt-users at lists.allstarlink.org
>
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/75e502c5/attachment.html>

From loren at lorentedford.com  Tue Apr 24 19:10:51 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Tue, 24 Apr 2018 14:10:51 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <CAL8dJwrBM_p9pApbb6Kf8qmw=9d9zYMZ8+c49v1zMiHyEfM-tw@mail.gmail.com>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
 <20180424165058.6B7701E0327@morty.keekles.org>
 <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>
 <20180424172521.297F51E0941@morty.keekles.org>
 <CAL8dJwrBM_p9pApbb6Kf8qmw=9d9zYMZ8+c49v1zMiHyEfM-tw@mail.gmail.com>
Message-ID: <20180424191051.3B80D1E26B6@morty.keekles.org>

Hey Pierre by chance did you get to read the entire thread on this?

Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Pierre Martel
Sent: Tuesday, April 24, 2018 2:08 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs

I really dislike mechanical TOT. Why not use a small RP? that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router. 
?
A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover? the geen? led to feed the phototransistor (maybe a simple straw would do!)? . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C.? Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state. 


2018-04-24 13:25 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
The way it stands at the moment I am not entirely sure? Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn?t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn?t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue.. 
?
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
?
From: Steve Zingman
Sent: Tuesday, April 24, 2018 12:14 PM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
?
I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don?t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
?
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
?
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
?
From: DuaneVT .
Sent: Tuesday, April 24, 2018 11:46 AM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
?
Radio Control was referenced as "Auxiliary Service".
?
Per?Part 97 :?Sec. 97.201 Auxiliary station

(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz, 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
?
?


_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
?
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
?
?

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/db6f7a79/attachment.html>

From petem001 at gmail.com  Tue Apr 24 19:18:05 2018
From: petem001 at gmail.com (Pierre Martel)
Date: Tue, 24 Apr 2018 15:18:05 -0400
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <20180424191051.3B80D1E26B6@morty.keekles.org>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
 <20180424165058.6B7701E0327@morty.keekles.org>
 <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>
 <20180424172521.297F51E0941@morty.keekles.org>
 <CAL8dJwrBM_p9pApbb6Kf8qmw=9d9zYMZ8+c49v1zMiHyEfM-tw@mail.gmail.com>
 <20180424191051.3B80D1E26B6@morty.keekles.org>
Message-ID: <CAL8dJwp83AR9Ofs2WVJEz9w944XdPppf9uCm5trKYp4DGqGkVg@mail.gmail.com>

yup I did,
Is my post so far off subject for you to ask that question.

I use a similar method on my side but on an atmel. when I did the circuit
the RPI was not yet available. Of course it does not do as much as the
circuit I discribed but it does work. In fact beside the fact that I
receive an email from my asterisk system, I usely dont even know that my
node was stuck or that a uri was not working properly. Am I lazy.. yup..


2018-04-24 15:10 GMT-04:00 Loren Tedford <loren at lorentedford.com>:

> Hey Pierre by chance did you get to read the entire thread on this?
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *Pierre Martel <petem001 at gmail.com>
> *Sent: *Tuesday, April 24, 2018 2:08 PM
> *To: *Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
>
>
> I really dislike mechanical TOT. Why not use a small RP? that can monitor
> the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the
> MB, power off the radios, power off/on the router.
>
>
>
> A simple circuit that have a phototransistor that drive an input of the
> rpi would be easy to install, just use 2 small tube that cover  the geen
> led to feed the phototransistor (maybe a simple straw would do!)  . pretty
> sur that just a npn phototransistor could be driven directly with just a
> small pull up resistor to make the sensing part of the circuit and the rest
> is just simple coding either in python or in C.  Could even had automation
> like ping fail that reset the router/wifi link. you could even monitor the
> ASL system for activity and compare the 'software state' to the hardware
> state.
>
>
>
>
>
> 2018-04-24 13:25 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
>
> The way it stands at the moment I am not entirely sure? Here is what I
> found during reinstallation the Memory failed a self check that I ran while
> putting Windows on it to stress test the machine.. The hard drive doesn?t
> seem to want to take any data at this point.. But before attempting to
> format reinstall on this machine the system booted still.. My guess is some
> thing mechanical could have caused Asterisks to have failed at this point..
> Honestly it seems to be a bit of a waste of my time to continue working on
> this machine when I have a second one exact specs sitting here ready to
> go.. We are doing the just in case TOT timer in the radios and this will
> affect autopatch users and anyone else that doesn?t let the system fully
> drop.. This is for my own re assurance that I have to the best of my
> ability solved the issue..
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *Steve Zingman <szingman at msgstor.com>
> *Sent: *Tuesday, April 24, 2018 12:14 PM
> *To: *app_rpt-users at lists.allstarlink.org
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
>
>
> I'm a little confused, Did Asterisk fail or memory and possibly a
> motherboard?
>
> On 4/24/2018 12:50 PM, Loren Tedford wrote:
>
> Well technically it could have been controlled by the two meter repeater
> had the two meter repeater responded under normal circumstances.. What I am
> going to do for future repeater operations is to put TOT timers on the
> radio and I don?t care whether individuals on Autopatch that are calling
> Emergency services get disconnect etc because of radio tot.. No longer am I
> going to rely on asterisk to handle the TOT primarly.. Because of this
> experience.. We now know that we have fried some memory and possibly a
> motherboard but my testing at this point is stopping.. Moving forward with
> new gear..
>
>
>
> We originally turned off the TOT timer in the radios because of scenario
> involving autopatch and calling during severe weather..
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *DuaneVT . <selkie2 at comcast.net>
> *Sent: *Tuesday, April 24, 2018 11:46 AM
> *To: *app_rpt-users at lists.allstarlink.org
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
>
>
> Radio Control was referenced as "Auxiliary Service".
>
>
>
> Per *Part 97 : **Sec. 97.201 Auxiliary station*
>
> (a) Any amateur station licensed to a holder of a Technician, General,
> Advanced or Amateur Extra Class operator license may be an auxiliary
> station. A holder of a Technician, General, Advanced or Amateur Extra Class
> operator license may be the control operator of an auxiliary station,
> subject to the privileges of the class of operator license held.
>
> (b) An auxiliary station may transmit only on the 2 m and shorter
> wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz,
> 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
>
> So 2 meters and above now.
>
> 73, Duane KA1LM
>
>
>
>
>
>
>
> _______________________________________________
>
> App_rpt-users mailing list
>
> App_rpt-users at lists.allstarlink.org
>
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/b8925310/attachment.html>

From loren at lorentedford.com  Tue Apr 24 19:24:12 2018
From: loren at lorentedford.com (Loren Tedford)
Date: Tue, 24 Apr 2018 14:24:12 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <CAL8dJwp83AR9Ofs2WVJEz9w944XdPppf9uCm5trKYp4DGqGkVg@mail.gmail.com>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
 <20180424165058.6B7701E0327@morty.keekles.org>
 <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>
 <20180424172521.297F51E0941@morty.keekles.org>
 <CAL8dJwrBM_p9pApbb6Kf8qmw=9d9zYMZ8+c49v1zMiHyEfM-tw@mail.gmail.com>
 <20180424191051.3B80D1E26B6@morty.keekles.org>
 <CAL8dJwp83AR9Ofs2WVJEz9w944XdPppf9uCm5trKYp4DGqGkVg@mail.gmail.com>
Message-ID: <20180424192412.0637B1E26B6@morty.keekles.org>

Sorry Pierre for being short winded.. Let me get back to you Tuesday.. Right at the moment Medical issues and relaxation needs to be my priority up until Surgery on Monday.. But yeah I don?t like pi?s that much but in hind site I understand where your coming from.. I don?t like hardware tot either.. But not sure If I am willing to take the chance on software again.. 

Anyway I will catch every one when I can get back to concentrating on this topic later on..

Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Pierre Martel
Sent: Tuesday, April 24, 2018 2:18 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs

yup I did, 
Is my post so far off subject for you to ask that question. 
I use a similar method on my side but on an atmel. when I did the circuit the RPI was not yet available. Of course it does not do as much as the circuit I discribed but it does work. In fact beside the fact that I receive an email from my asterisk system, I usely dont even know that my node was stuck or that a uri was not working properly. Am I lazy.. yup.. 

2018-04-24 15:10 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
Hey Pierre by chance did you get to read the entire thread on this?
?
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
?
From: Pierre Martel
Sent: Tuesday, April 24, 2018 2:08 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
?
I really dislike mechanical TOT. Why not use a small RP? that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router. 
?
A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover? the geen? led to feed the phototransistor (maybe a simple straw would do!)? . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C.? Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state. 
?
?
2018-04-24 13:25 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
The way it stands at the moment I am not entirely sure? Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn?t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn?t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue.. 
?
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
?
From: Steve Zingman
Sent: Tuesday, April 24, 2018 12:14 PM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
?
I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don?t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
?
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
?
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 ? 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
?
From: DuaneVT .
Sent: Tuesday, April 24, 2018 11:46 AM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
?
Radio Control was referenced as "Auxiliary Service".
?
Per?Part 97 :?Sec. 97.201 Auxiliary station
(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz, 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
?
?

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
?
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
?
?

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
?
?

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/1dc26cff/attachment.html>

From petem001 at gmail.com  Tue Apr 24 20:23:53 2018
From: petem001 at gmail.com (Pierre Martel)
Date: Tue, 24 Apr 2018 16:23:53 -0400
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <20180424192412.0637B1E26B6@morty.keekles.org>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
 <20180424165058.6B7701E0327@morty.keekles.org>
 <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>
 <20180424172521.297F51E0941@morty.keekles.org>
 <CAL8dJwrBM_p9pApbb6Kf8qmw=9d9zYMZ8+c49v1zMiHyEfM-tw@mail.gmail.com>
 <20180424191051.3B80D1E26B6@morty.keekles.org>
 <CAL8dJwp83AR9Ofs2WVJEz9w944XdPppf9uCm5trKYp4DGqGkVg@mail.gmail.com>
 <20180424192412.0637B1E26B6@morty.keekles.org>
Message-ID: <CAL8dJwrQ62mr1uwbtpkAqwC5Rqb7P2kg8mmKOr9AQGT4mF2KsA@mail.gmail.com>

the trick is to have more then one way to skin the cat.  2 failure at the
same time is pretty rare, 3 failure even more. the only way I could see
such great amount of bad luck would be a direct hit from lightning.

take care of your health.


2018-04-24 15:24 GMT-04:00 Loren Tedford <loren at lorentedford.com>:

> Sorry Pierre for being short winded.. Let me get back to you Tuesday..
> Right at the moment Medical issues and relaxation needs to be my priority
> up until Surgery on Monday.. But yeah I don?t like pi?s that much but in
> hind site I understand where your coming from.. I don?t like hardware tot
> either.. But not sure If I am willing to take the chance on software
> again..
>
>
>
> Anyway I will catch every one when I can get back to concentrating on this
> topic later on..
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *Pierre Martel <petem001 at gmail.com>
> *Sent: *Tuesday, April 24, 2018 2:18 PM
>
> *To: *Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
>
>
> yup I did,
>
> Is my post so far off subject for you to ask that question.
>
> I use a similar method on my side but on an atmel. when I did the circuit
> the RPI was not yet available. Of course it does not do as much as the
> circuit I discribed but it does work. In fact beside the fact that I
> receive an email from my asterisk system, I usely dont even know that my
> node was stuck or that a uri was not working properly. Am I lazy.. yup..
>
>
>
> 2018-04-24 15:10 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
>
> Hey Pierre by chance did you get to read the entire thread on this?
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *Pierre Martel <petem001 at gmail.com>
> *Sent: *Tuesday, April 24, 2018 2:08 PM
> *To: *Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
>
>
> I really dislike mechanical TOT. Why not use a small RP? that can monitor
> the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the
> MB, power off the radios, power off/on the router.
>
>
>
> A simple circuit that have a phototransistor that drive an input of the
> rpi would be easy to install, just use 2 small tube that cover  the geen
> led to feed the phototransistor (maybe a simple straw would do!)  . pretty
> sur that just a npn phototransistor could be driven directly with just a
> small pull up resistor to make the sensing part of the circuit and the rest
> is just simple coding either in python or in C.  Could even had automation
> like ping fail that reset the router/wifi link. you could even monitor the
> ASL system for activity and compare the 'software state' to the hardware
> state.
>
>
>
>
>
> 2018-04-24 13:25 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
>
> The way it stands at the moment I am not entirely sure? Here is what I
> found during reinstallation the Memory failed a self check that I ran while
> putting Windows on it to stress test the machine.. The hard drive doesn?t
> seem to want to take any data at this point.. But before attempting to
> format reinstall on this machine the system booted still.. My guess is some
> thing mechanical could have caused Asterisks to have failed at this point..
> Honestly it seems to be a bit of a waste of my time to continue working on
> this machine when I have a second one exact specs sitting here ready to
> go.. We are doing the just in case TOT timer in the radios and this will
> affect autopatch users and anyone else that doesn?t let the system fully
> drop.. This is for my own re assurance that I have to the best of my
> ability solved the issue..
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *Steve Zingman <szingman at msgstor.com>
> *Sent: *Tuesday, April 24, 2018 12:14 PM
> *To: *app_rpt-users at lists.allstarlink.org
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
>
>
> I'm a little confused, Did Asterisk fail or memory and possibly a
> motherboard?
>
> On 4/24/2018 12:50 PM, Loren Tedford wrote:
>
> Well technically it could have been controlled by the two meter repeater
> had the two meter repeater responded under normal circumstances.. What I am
> going to do for future repeater operations is to put TOT timers on the
> radio and I don?t care whether individuals on Autopatch that are calling
> Emergency services get disconnect etc because of radio tot.. No longer am I
> going to rely on asterisk to handle the TOT primarly.. Because of this
> experience.. We now know that we have fried some memory and possibly a
> motherboard but my testing at this point is stopping.. Moving forward with
> new gear..
>
>
>
> We originally turned off the TOT timer in the radios because of scenario
> involving autopatch and calling during severe weather..
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 ? 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *DuaneVT . <selkie2 at comcast.net>
> *Sent: *Tuesday, April 24, 2018 11:46 AM
> *To: *app_rpt-users at lists.allstarlink.org
> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>
>
>
> Radio Control was referenced as "Auxiliary Service".
>
>
>
> Per *Part 97 : **Sec. 97.201 Auxiliary station*
>
> (a) Any amateur station licensed to a holder of a Technician, General,
> Advanced or Amateur Extra Class operator license may be an auxiliary
> station. A holder of a Technician, General, Advanced or Amateur Extra Class
> operator license may be the control operator of an auxiliary station,
> subject to the privileges of the class of operator license held.
>
> (b) An auxiliary station may transmit only on the 2 m and shorter
> wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz,
> 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
>
> So 2 meters and above now.
>
> 73, Duane KA1LM
>
>
>
>
>
>
>
> _______________________________________________
>
> App_rpt-users mailing list
>
> App_rpt-users at lists.allstarlink.org
>
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/c48a2099/attachment.html>

From ars.w5omr at gmail.com  Tue Apr 24 21:31:44 2018
From: ars.w5omr at gmail.com (ARS W5OMR)
Date: Tue, 24 Apr 2018 16:31:44 -0500
Subject: [App_rpt-users] Repors of low/bassy audio
Message-ID: <CAOhDOk31QrKzeJnJyXPJkq1PGG45UBSFwuBg9k5iqq2eskAwzg@mail.gmail.com>

using chan_usbradio on a pi3 driving a Motorla R100 rptr

I'm wondering if my preemphasis and limiting looks good to you guys?

I've made changes, and am -not- noticing a difference when I go back
to the console and 'reload' or even do an 'astres.sh' at the command
line prompt.
~shrug~

Rig is a Motorola R100
using a URIx

usbradio.conf looks like:

;
; Usbradio channel driver Configuration File
;

[general]

[usb_29655]

eeprom = 0              ; EEPROM installed: 0,1
                        ; 0 = no (default)
                        ; 1 = yes

hdwtype = 0             ; Leave this set to 0 for USB sound fobs modified using
                        ; the instructions from usbfob.pdf. Use a setting of
                        ; 1 is for Dingotel/Sph interfaces.

rxboost = 0             ; 0 - 20db attenuator inserted
                        ; 1 - 20db attenuator removed
                        ; Set to 1 for additonal gain if using a
low-level receiver output

rxctcssrelax = 1        ; reduce talkoff from radios w/o CTCSS Tx HPF
                        ; Do not change this, leave this as a 1

rxsqhyst = 500          ; Setting Squelch Hysteresis
                        ; 3000 is the default amount.
                        ; An amount of 500 seems good.
                        ; Then set the squelch to the highest number
revealed when doing a "radio
                        ; tune rxsquelch" - running the command
multiple (like 20) times in a row.
                        ;
<http://allstarnode.com/wiki/lib/exe/fetch.php?media=asterisk-notes-wj8g.pdf>

;txctcssdefault = 100.0 ; default tx ctcss freq, any frequency permitted
;rxctcssfreqs = 100.0   ; rx ctcss freqs in floating point. must be in table
;txctcssfreqs = 100.0   ; tx ctcss freqs, any frequency permitted
rxctcssoverride = 1     ; Set to 1 or yes to start out in carrier squelch mode

carrierfrom = usb       ; no,usb,usbinvert,dsp,vox
                        ; no - no carrier detection at all
                        ; usb - from the COR line on the USB sound fob
(Active high)
                        ; usbinvert - from the inverted COR line on
the USB sound fob (Active low)
                        ; dsp - from RX noise using dsp techniques
                        ; vox - voice activated from RX audio
ctcssfrom = usb         ; no,usb,usbinvert,dsp
                        ; no - no CTCSS decoding, system will be carrier squelch
                        ; usb - from the CTCSS line on the USB sound
fob (Active high)
                        ; usbinvert - from the inverted CTCSS line on
the USB sound fob (Active low)
                        ; dsp - CTCSS decoding using RX audio in DSP.
                        ; rxdemod option must be set to flat for this to work.

rxdemod = flat          ; input type from radio: no,speaker,flat
                        ; no - RX audio input not used
                        ; flat - Use RX audio from discriminator
(before de-emphasis)
                        ; speaker - use de-emphasized audio

rxsquelchdelay = 30     ; delayline in ms carrier squelch tail eliminator

rxondelay = 20          ; Number of 20mSec intervals following the
release of PTT.
                        ; Uncomment and/or adjust for simplex nodes to
eliminate "Ping Ponging"
                        ; or "Relay Racing". A positive value here
will instruct the usbradio
                        ; driver to ignore the COR line for a
specified number of 20mSec
                        ; intervals following the release of PTT. Use
this ONLY on simplex
                        ; nodes, and leave commented out for repeaters
or other full duplex nodes.

txboost = 0             ; Add transmitter audio gain boost: 0,1


;#################
;#  section of interest           #
txprelim = yes          ; Audio processing on left output channel: no,yes
                        ; no - Audio is not pre-emphasized and limited.
                        ; Suitable for use on a microphone input
                        ; yes - Audio is pre-emphasized and limited.
                        ; Suitable for direct connection to an FM modulator

txlimonly = no          ; Audio limiting with no pre-emphasis on
output channel: no,yes
                        ; no - Audio is not limited.
                        ; yes - Audio is  limited.
                        ; Suitable for transmitters with no limiting
but with pre-emphasis.
;# end section of interest      #
;#################

txtoctype = notone      ; Transmit tone control type: no,phase,notone
                        ; no - CTCSS tone encoding with no hang time
                        ; phase - encode CTCSS and reverse phase
                        ; AKA ("reverse burst") before unkeying TX
                        ; notone - encode CTCSS and stop sending tone
before unkeying TX
                        ; AKA ("chicken burst")

txmixa = composite      ; Left channel output: no,voice,tone,composite,auxvoice
                        ; no - Do not output anything
                        ; voice - output voice only
                        ; tone - CTCSS tone only
                        ; composite - voice and tone
                        ; auxvoice - auxiliary voice output at
headphone level for monitoring

txmixb = no             ; Right channel output:
no,voice,tone,composite, auxvoice
                        ; no - Do not output anything
                        ; voice - output voice only
                        ; tone - CTCSS tone only
                        ; composite - voice and tone
                        ; auxvoice - auxiliary voice output at
headphone level for monitoring

invertptt = 0           ; Invert PTT: 0,1
                        ; 0 - ground to transmit
                        ; 1 - open to transmit
                        ; This is the collector lead of the 2n4401 on
the modified
                        ; usb sound fob.
                        ; please refer to the howto for the procedure
to do this.

duplex = 1              ; Duplex 0,1
                        ; 0 - half duplex
                        ; 1 - full duplex



-- 
73 = Best Regards,
-Geoff/W5OMR


From bmeyer2929 at cox.net  Wed Apr 25 02:35:39 2018
From: bmeyer2929 at cox.net (Bob Meyer)
Date: Tue, 24 Apr 2018 21:35:39 -0500
Subject: [App_rpt-users] Can't link to AWS hosted AllStar Hub - Solved
Message-ID: <0472C40F-7A13-490D-AF62-2899C932A45B@cox.net>

In short: the problem was operator error. I had tried earlier to put two servers/nodes on the same LAN, and then decided to move one of the servers and its node to a virtual PC on Amazons AWS. I neglected to properly edit the config files after the move.  We have since had 4 nodes simultaneously connect to the node on AWS. 

Thanks to Steve Z and the others for their time and suggestions!

Bob KF5TVG

From kd2nfc at gmail.com  Wed Apr 25 14:04:17 2018
From: kd2nfc at gmail.com (KD2NFC, Joe Puma)
Date: Wed, 25 Apr 2018 10:04:17 -0400
Subject: [App_rpt-users] RPi Gpio
Message-ID: <CFC3B1D2-EB1D-495D-AAFC-5F54B3A1D719@gmail.com>


Greetings,

I?m new to the group here and have some questions regarding All-Star link. I have a raspberry pi already set up with an HT radio (baofeng) and I was using svxlink node. I already have the radio wired up to use the GPIO on the raspberry pi for a PTT and COR. I use a USB dongle for audio and I am not sure if it is the same one that is used to modify and tap the GPIO pins, But I was trying to find a way to use the GPIO from the raspberry pi instead, since it?s already configured that way and works with SVXlink. I have been finding information on the Internet that suggests that the All-Star link software can be configured to use the RPI GPIO pins but haven?t found any solid documentation to do so. I was going to jump back in and look at the configuration files to see if there are any clues there but if someone has done this already can you please clue me in how I can use GPIO from the raspberry pi.
 
You can check some of my radio projects here http://instagram.com/KD2NFC

Best
Joe
KD2NFC

Sent from my iPad

From tisawyer at gmail.com  Wed Apr 25 21:13:19 2018
From: tisawyer at gmail.com (Tim Sawyer)
Date: Wed, 25 Apr 2018 21:13:19 +0000
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <CAL8dJwrQ62mr1uwbtpkAqwC5Rqb7P2kg8mmKOr9AQGT4mF2KsA@mail.gmail.com>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
 <20180424165058.6B7701E0327@morty.keekles.org>
 <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>
 <20180424172521.297F51E0941@morty.keekles.org>
 <CAL8dJwrBM_p9pApbb6Kf8qmw=9d9zYMZ8+c49v1zMiHyEfM-tw@mail.gmail.com>
 <20180424191051.3B80D1E26B6@morty.keekles.org>
 <CAL8dJwp83AR9Ofs2WVJEz9w944XdPppf9uCm5trKYp4DGqGkVg@mail.gmail.com>
 <20180424192412.0637B1E26B6@morty.keekles.org>
 <CAL8dJwrQ62mr1uwbtpkAqwC5Rqb7P2kg8mmKOr9AQGT4mF2KsA@mail.gmail.com>
Message-ID: <CAG3ht9tUvW=THx8jO4TfxVOv0bFW0_tquq1c8Z3uJ6+CvJqPtA@mail.gmail.com>

?Friends don?t let freinds use USB.? Jim Dixon.

On Tue, Apr 24, 2018 at 1:24 PM Pierre Martel <petem001 at gmail.com> wrote:

> the trick is to have more then one way to skin the cat.  2 failure at the
> same time is pretty rare, 3 failure even more. the only way I could see
> such great amount of bad luck would be a direct hit from lightning.
>
> take care of your health.
>
>
> 2018-04-24 15:24 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
>
>> Sorry Pierre for being short winded.. Let me get back to you Tuesday..
>> Right at the moment Medical issues and relaxation needs to be my priority
>> up until Surgery on Monday.. But yeah I don?t like pi?s that much but in
>> hind site I understand where your coming from.. I don?t like hardware tot
>> either.. But not sure If I am willing to take the chance on software
>> again..
>>
>>
>>
>> Anyway I will catch every one when I can get back to concentrating on
>> this topic later on..
>>
>>
>>
>> Loren Tedford (KC9ZHV)
>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>> Fax: 1-618-551-2755
>> Email: loren at lorentedford.com
>> Email: KC9ZHV at KC9ZHV.com
>> http://www.lorentedford.com
>> http://www.kc9zhv.com
>> http://forum.kc9zhv.com
>> http://hub.kc9zhv.com
>> http://Ltcraft.net
>> http://voipham.com
>>
>>
>>
>> *From: *Pierre Martel <petem001 at gmail.com>
>> *Sent: *Tuesday, April 24, 2018 2:18 PM
>>
>> *To: *Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>>
>>
>>
>> yup I did,
>>
>> Is my post so far off subject for you to ask that question.
>>
>> I use a similar method on my side but on an atmel. when I did the circuit
>> the RPI was not yet available. Of course it does not do as much as the
>> circuit I discribed but it does work. In fact beside the fact that I
>> receive an email from my asterisk system, I usely dont even know that my
>> node was stuck or that a uri was not working properly. Am I lazy.. yup..
>>
>>
>>
>> 2018-04-24 15:10 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
>>
>> Hey Pierre by chance did you get to read the entire thread on this?
>>
>>
>>
>> Loren Tedford (KC9ZHV)
>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>> Fax: 1-618-551-2755
>> Email: loren at lorentedford.com
>> Email: KC9ZHV at KC9ZHV.com
>> http://www.lorentedford.com
>> http://www.kc9zhv.com
>> http://forum.kc9zhv.com
>> http://hub.kc9zhv.com
>> http://Ltcraft.net
>> http://voipham.com
>>
>>
>>
>> *From: *Pierre Martel <petem001 at gmail.com>
>> *Sent: *Tuesday, April 24, 2018 2:08 PM
>> *To: *Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>>
>> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>>
>>
>>
>> I really dislike mechanical TOT. Why not use a small RP? that can monitor
>> the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the
>> MB, power off the radios, power off/on the router.
>>
>>
>>
>> A simple circuit that have a phototransistor that drive an input of the
>> rpi would be easy to install, just use 2 small tube that cover  the geen
>> led to feed the phototransistor (maybe a simple straw would do!)  . pretty
>> sur that just a npn phototransistor could be driven directly with just a
>> small pull up resistor to make the sensing part of the circuit and the rest
>> is just simple coding either in python or in C.  Could even had automation
>> like ping fail that reset the router/wifi link. you could even monitor the
>> ASL system for activity and compare the 'software state' to the hardware
>> state.
>>
>>
>>
>>
>>
>> 2018-04-24 13:25 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
>>
>> The way it stands at the moment I am not entirely sure? Here is what I
>> found during reinstallation the Memory failed a self check that I ran while
>> putting Windows on it to stress test the machine.. The hard drive doesn?t
>> seem to want to take any data at this point.. But before attempting to
>> format reinstall on this machine the system booted still.. My guess is some
>> thing mechanical could have caused Asterisks to have failed at this point..
>> Honestly it seems to be a bit of a waste of my time to continue working on
>> this machine when I have a second one exact specs sitting here ready to
>> go.. We are doing the just in case TOT timer in the radios and this will
>> affect autopatch users and anyone else that doesn?t let the system fully
>> drop.. This is for my own re assurance that I have to the best of my
>> ability solved the issue..
>>
>>
>>
>> Loren Tedford (KC9ZHV)
>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>> Fax: 1-618-551-2755
>> Email: loren at lorentedford.com
>> Email: KC9ZHV at KC9ZHV.com
>> http://www.lorentedford.com
>> http://www.kc9zhv.com
>> http://forum.kc9zhv.com
>> http://hub.kc9zhv.com
>> http://Ltcraft.net
>> http://voipham.com
>>
>>
>>
>> *From: *Steve Zingman <szingman at msgstor.com>
>> *Sent: *Tuesday, April 24, 2018 12:14 PM
>> *To: *app_rpt-users at lists.allstarlink.org
>> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>>
>>
>>
>> I'm a little confused, Did Asterisk fail or memory and possibly a
>> motherboard?
>>
>> On 4/24/2018 12:50 PM, Loren Tedford wrote:
>>
>> Well technically it could have been controlled by the two meter repeater
>> had the two meter repeater responded under normal circumstances.. What I am
>> going to do for future repeater operations is to put TOT timers on the
>> radio and I don?t care whether individuals on Autopatch that are calling
>> Emergency services get disconnect etc because of radio tot.. No longer am I
>> going to rely on asterisk to handle the TOT primarly.. Because of this
>> experience.. We now know that we have fried some memory and possibly a
>> motherboard but my testing at this point is stopping.. Moving forward with
>> new gear..
>>
>>
>>
>> We originally turned off the TOT timer in the radios because of scenario
>> involving autopatch and calling during severe weather..
>>
>>
>>
>> Loren Tedford (KC9ZHV)
>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>> Fax: 1-618-551-2755
>> Email: loren at lorentedford.com
>> Email: KC9ZHV at KC9ZHV.com
>> http://www.lorentedford.com
>> http://www.kc9zhv.com
>> http://forum.kc9zhv.com
>> http://hub.kc9zhv.com
>> http://Ltcraft.net
>> http://voipham.com
>>
>>
>>
>> *From: *DuaneVT . <selkie2 at comcast.net>
>> *Sent: *Tuesday, April 24, 2018 11:46 AM
>> *To: *app_rpt-users at lists.allstarlink.org
>> *Subject: *Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>>
>>
>>
>> Radio Control was referenced as "Auxiliary Service".
>>
>>
>>
>> Per *Part 97 : **Sec. 97.201 Auxiliary station*
>>
>> (a) Any amateur station licensed to a holder of a Technician, General,
>> Advanced or Amateur Extra Class operator license may be an auxiliary
>> station. A holder of a Technician, General, Advanced or Amateur Extra Class
>> operator license may be the control operator of an auxiliary station,
>> subject to the privileges of the class of operator license held.
>>
>> (b) An auxiliary station may transmit only on the 2 m and shorter
>> wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz,
>> 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
>>
>> So 2 meters and above now.
>>
>> 73, Duane KA1LM
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> App_rpt-users mailing list
>>
>> App_rpt-users at lists.allstarlink.org
>>
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.

-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180425/8e60ea05/attachment.html>

From tisawyer at gmail.com  Wed Apr 25 21:21:28 2018
From: tisawyer at gmail.com (Tim Sawyer)
Date: Wed, 25 Apr 2018 14:21:28 -0700
Subject: [App_rpt-users] Getting details of AllStar Node from the Node ID
In-Reply-To: <CAC-Lcd9okihP5nnyXNHD-KkKvXn1Ffnvk5dOCz_3yG=UXtVC3Q@mail.gmail.com>
References: <CAC-Lcd9okihP5nnyXNHD-KkKvXn1Ffnvk5dOCz_3yG=UXtVC3Q@mail.gmail.com>
Message-ID: <CAG3ht9uqLPgj3qBifasZzL+6ZmOd1=_Agy6t6-p+BYWKeheMFw@mail.gmail.com>

The only public API I am aware of is this Allmon script.
https://github.com/tsawyer/allmon2/blob/master/astdb.php

It grabs the whole node list not just one node. But if you cron it to run
once a day then you can parse the result often as needed.

On Mon, Apr 23, 2018 at 4:03 PM, 2E0SIP <app_rpt at marrold.co.uk> wrote:

> Hi All,
>
> Is there an 'API' (Either on the local node or the web) for getting info
> on an individual AllStar node, from the node number? E.G Call Sign /
> Location etc
>
> Or, a list in CSV / JSON format?
>
> There's a list here - https://allstarlink.org/nodelist.php But from
> experience, parsing HTML tables is a pain.
>
> Thanks
>
> Matthew
> 2E0SIP
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180425/d6d8bbab/attachment.html>

From thorn at myactv.net  Wed Apr 25 21:45:35 2018
From: thorn at myactv.net (Greg Thornwall)
Date: Wed, 25 Apr 2018 17:45:35 -0400
Subject: [App_rpt-users] Getting details of AllStar Node from the Node ID
In-Reply-To: <CAG3ht9uqLPgj3qBifasZzL+6ZmOd1=_Agy6t6-p+BYWKeheMFw@mail.gmail.com>
References: <CAC-Lcd9okihP5nnyXNHD-KkKvXn1Ffnvk5dOCz_3yG=UXtVC3Q@mail.gmail.com>
 <CAG3ht9uqLPgj3qBifasZzL+6ZmOd1=_Agy6t6-p+BYWKeheMFw@mail.gmail.com>
Message-ID: <8a51a56a-0c7c-607f-30cf-ab888d491858@myactv.net>


I have a test json scriptthat is available to the web:

http://stats.allstarlink.org/GregTestjsondata.cgi

I wrote some php scripts to parse that data:

http://stats.allstarlink.org/maps/nodeList.php?node=2135

By call:

http://stats.allstarlink.org/maps/callAllstarNodes.php?callsign=W3WAN

Some maps that use it: http://stats.allstarlink.org/maps/index.html


73 Greg KD3SU


On 04/25/2018 05:21 PM, Tim Sawyer wrote:
> The only public API I am aware of is this Allmon script.
> ?https://github.com/tsawyer/allmon2/blob/master/astdb.php
>
> It grabs the whole node list not just one node. But if you cron it to
> run once a day then you can parse the result often as needed.?
>
> On Mon, Apr 23, 2018 at 4:03 PM, 2E0SIP <app_rpt at marrold.co.uk
> <mailto:app_rpt at marrold.co.uk>> wrote:
>
>     Hi All,
>
>     Is there an 'API' (Either on the local node or the web) for
>     getting info on an individual AllStar node, from the node number?
>     E.G Call Sign / Location etc?
>
>     Or, a list in CSV / JSON format?
>
>     There's a list here -?https://allstarlink.org/nodelist.php
>     <https://allstarlink.org/nodelist.php> But from experience,
>     parsing HTML tables is a pain.
>
>     Thanks
>
>     Matthew
>     2E0SIP
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
>
>
> -- 
> Tim WD6AWP
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180425/d27b8120/attachment.html>

From app_rpt at marrold.co.uk  Wed Apr 25 22:01:42 2018
From: app_rpt at marrold.co.uk (2E0SIP)
Date: Wed, 25 Apr 2018 23:01:42 +0100
Subject: [App_rpt-users] Getting details of AllStar Node from the Node ID
In-Reply-To: <8a51a56a-0c7c-607f-30cf-ab888d491858@myactv.net>
References: <CAC-Lcd9okihP5nnyXNHD-KkKvXn1Ffnvk5dOCz_3yG=UXtVC3Q@mail.gmail.com>
 <CAG3ht9uqLPgj3qBifasZzL+6ZmOd1=_Agy6t6-p+BYWKeheMFw@mail.gmail.com>
 <8a51a56a-0c7c-607f-30cf-ab888d491858@myactv.net>
Message-ID: <CAC-Lcd9f3zCoWp6yDfLAg6GKB0hMW1pp4pKm03KjvCuOjmEDJg@mail.gmail.com>

Thanks both, thats really helpful

Matthew
2E0SIP

On Wed, Apr 25, 2018 at 10:45 PM, Greg Thornwall <thorn at myactv.net> wrote:

>
> I have a test json script that is available to the web:
>
> http://stats.allstarlink.org/GregTestjsondata.cgi
>
> I wrote some php scripts to parse that data:
>
> http://stats.allstarlink.org/maps/nodeList.php?node=2135
>
> By call:
>
> http://stats.allstarlink.org/maps/callAllstarNodes.php?callsign=W3WAN
> Some maps that use it: http://stats.allstarlink.org/maps/index.html
>
>
> 73 Greg KD3SU
>
>
>
> On 04/25/2018 05:21 PM, Tim Sawyer wrote:
>
> The only public API I am aware of is this Allmon script.
> https://github.com/tsawyer/allmon2/blob/master/astdb.php
>
> It grabs the whole node list not just one node. But if you cron it to run
> once a day then you can parse the result often as needed.
>
> On Mon, Apr 23, 2018 at 4:03 PM, 2E0SIP <app_rpt at marrold.co.uk> wrote:
>
>> Hi All,
>>
>> Is there an 'API' (Either on the local node or the web) for getting info
>> on an individual AllStar node, from the node number? E.G Call Sign /
>> Location etc
>>
>> Or, a list in CSV / JSON format?
>>
>> There's a list here - https://allstarlink.org/nodelist.php But from
>> experience, parsing HTML tables is a pain.
>>
>> Thanks
>>
>> Matthew
>> 2E0SIP
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> Tim WD6AWP
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180425/7fbe12a7/attachment.html>

From k6ecm1 at gmail.com  Wed Apr 25 23:31:53 2018
From: k6ecm1 at gmail.com (Bob Pyke)
Date: Wed, 25 Apr 2018 16:31:53 -0700
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <CAG3ht9tUvW=THx8jO4TfxVOv0bFW0_tquq1c8Z3uJ6+CvJqPtA@mail.gmail.com>
References: <CABhxdJko84qYHcEo-BA7XGe=DRbvqhnckg7MqcBGi61Rk+ij-Q@mail.gmail.com>
 <20180424165058.6B7701E0327@morty.keekles.org>
 <009ac488-1830-5bd8-4db8-b21161cd2ecd@msgstor.com>
 <20180424172521.297F51E0941@morty.keekles.org>
 <CAL8dJwrBM_p9pApbb6Kf8qmw=9d9zYMZ8+c49v1zMiHyEfM-tw@mail.gmail.com>
 <20180424191051.3B80D1E26B6@morty.keekles.org>
 <CAL8dJwp83AR9Ofs2WVJEz9w944XdPppf9uCm5trKYp4DGqGkVg@mail.gmail.com>
 <20180424192412.0637B1E26B6@morty.keekles.org>
 <CAL8dJwrQ62mr1uwbtpkAqwC5Rqb7P2kg8mmKOr9AQGT4mF2KsA@mail.gmail.com>
 <CAG3ht9tUvW=THx8jO4TfxVOv0bFW0_tquq1c8Z3uJ6+CvJqPtA@mail.gmail.com>
Message-ID: <51202AE6-F8EF-4B08-980B-4EFEA4C79567@gmail.com>

I remember his statement from long ago, and have been reminded of it many times over the past 5 years building and maintaining Allstarlink systems. My issues, and toughest to troubleshoot have all been USB centric... a hardware problem(sigh!) 

Thanks for the reminder. The quips and wit of ?The Duuuude? are surely missed.

I?ve been looking for old GPIO threads from the past that addressed using scripts to control the interface for RPi shutdowns and PTT, but have not found them. Any suggestions?

Thanks,
Bob
k6ecm
73
Sent from my iPhone

> On Apr 25, 2018, at 2:13 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
> 
> ?Friends don?t let freinds use USB.? Jim Dixon. 
> 
>> On Tue, Apr 24, 2018 at 1:24 PM Pierre Martel <petem001 at gmail.com> wrote:
>> the trick is to have more then one way to skin the cat.  2 failure at the same time is pretty rare, 3 failure even more. the only way I could see such great amount of bad luck would be a direct hit from lightning. 
>> 
>> take care of your health. 
>> 
>> 
>> 2018-04-24 15:24 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
>>> Sorry Pierre for being short winded.. Let me get back to you Tuesday.. Right at the moment Medical issues and relaxation needs to be my priority up until Surgery on Monday.. But yeah I don?t like pi?s that much but in hind site I understand where your coming from.. I don?t like hardware tot either.. But not sure If I am willing to take the chance on software again..
>>> 
>>>  
>>> 
>>> Anyway I will catch every one when I can get back to concentrating on this topic later on..
>>> 
>>>  
>>> 
>>> Loren Tedford (KC9ZHV) 
>>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>>> Fax: 1-618-551-2755
>>> Email: loren at lorentedford.com
>>> Email: KC9ZHV at KC9ZHV.com
>>> http://www.lorentedford.com
>>> http://www.kc9zhv.com
>>> http://forum.kc9zhv.com
>>> http://hub.kc9zhv.com
>>> http://Ltcraft.net
>>> http://voipham.com
>>> 
>>>  
>>> 
>>> From: Pierre Martel
>>> Sent: Tuesday, April 24, 2018 2:18 PM
>>> 
>>> 
>>> To: Users of Asterisk app_rpt
>>> Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>>>  
>>> 
>>> yup I did,
>>> 
>>> Is my post so far off subject for you to ask that question.
>>> 
>>> I use a similar method on my side but on an atmel. when I did the circuit the RPI was not yet available. Of course it does not do as much as the circuit I discribed but it does work. In fact beside the fact that I receive an email from my asterisk system, I usely dont even know that my node was stuck or that a uri was not working properly. Am I lazy.. yup..
>>> 
>>>  
>>> 
>>> 2018-04-24 15:10 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
>>> 
>>> Hey Pierre by chance did you get to read the entire thread on this?
>>> 
>>>  
>>> 
>>> Loren Tedford (KC9ZHV) 
>>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>>> Fax: 1-618-551-2755
>>> Email: loren at lorentedford.com
>>> Email: KC9ZHV at KC9ZHV.com
>>> http://www.lorentedford.com
>>> http://www.kc9zhv.com
>>> http://forum.kc9zhv.com
>>> http://hub.kc9zhv.com
>>> http://Ltcraft.net
>>> http://voipham.com
>>> 
>>>  
>>> 
>>> From: Pierre Martel
>>> Sent: Tuesday, April 24, 2018 2:08 PM
>>> To: Users of Asterisk app_rpt
>>> 
>>> Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>>> 
>>>  
>>> 
>>> I really dislike mechanical TOT. Why not use a small RP? that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router.
>>> 
>>>  
>>> 
>>> A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover  the geen  led to feed the phototransistor (maybe a simple straw would do!)  . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C.  Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state. 
>>> 
>>>  
>>> 
>>>  
>>> 
>>> 2018-04-24 13:25 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
>>> 
>>> The way it stands at the moment I am not entirely sure? Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn?t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn?t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue..
>>> 
>>>  
>>> 
>>> Loren Tedford (KC9ZHV) 
>>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>>> Fax: 1-618-551-2755
>>> Email: loren at lorentedford.com
>>> Email: KC9ZHV at KC9ZHV.com
>>> http://www.lorentedford.com
>>> http://www.kc9zhv.com
>>> http://forum.kc9zhv.com
>>> http://hub.kc9zhv.com
>>> http://Ltcraft.net
>>> http://voipham.com
>>> 
>>>  
>>> 
>>> From: Steve Zingman
>>> Sent: Tuesday, April 24, 2018 12:14 PM
>>> To: app_rpt-users at lists.allstarlink.org
>>> Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>>> 
>>>  
>>> 
>>> I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
>>> 
>>> On 4/24/2018 12:50 PM, Loren Tedford wrote:
>>> 
>>> Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don?t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
>>> 
>>>  
>>> 
>>> We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
>>> 
>>>  
>>> 
>>> Loren Tedford (KC9ZHV) 
>>> Phone Main: 1+ (631) 686 ? 8878 Option 1
>>> Fax: 1-618-551-2755
>>> Email: loren at lorentedford.com
>>> Email: KC9ZHV at KC9ZHV.com
>>> http://www.lorentedford.com
>>> http://www.kc9zhv.com
>>> http://forum.kc9zhv.com
>>> http://hub.kc9zhv.com
>>> http://Ltcraft.net
>>> http://voipham.com
>>> 
>>>  
>>> 
>>> From: DuaneVT .
>>> Sent: Tuesday, April 24, 2018 11:46 AM
>>> To: app_rpt-users at lists.allstarlink.org
>>> Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
>>> 
>>>  
>>> 
>>> Radio Control was referenced as "Auxiliary Service".
>>> 
>>>  
>>> 
>>> Per Part 97 : Sec. 97.201 Auxiliary station
>>> 
>>> (a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
>>> 
>>> (b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0?144.5 MHz, 145.8?146.0 MHz, 219?220 MHz, 222.00?222.15 MHz, 431?433 MHz, and 435?438 MHz segments.
>>> 
>>> So 2 meters and above now.
>>> 
>>> 73, Duane KA1LM
>>> 
>>>  
>>> 
>>>  
>>> 
>>>  
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>  
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>>  
>>> 
>>>  
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>>  
>>> 
>>>  
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>>  
>>> 
>>>  
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> -- 
> Tim WD6AWP
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180425/ece6603c/attachment.html>

From shawpbx at gmail.com  Thu Apr 26 20:13:18 2018
From: shawpbx at gmail.com (David Shaw)
Date: Thu, 26 Apr 2018 13:13:18 -0700
Subject: [App_rpt-users] Rasberry Pi3
In-Reply-To: <CA+3Rj6J1Y_wQ-fQRMZcbVpZ7M5PyjjsdUZTRV_-t=ud5BKtvVA@mail.gmail.com>
References: <CA+3Rj6J1Y_wQ-fQRMZcbVpZ7M5PyjjsdUZTRV_-t=ud5BKtvVA@mail.gmail.com>
Message-ID: <CAH4RvbLnqKT0o7_GTvzfWR0Vj17Y9Gm8_8mjKG9Lnp1DxGLYfw@mail.gmail.com>

Hello Jeff, Did you ever get help?

David



--
Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither
inclined nor determined to commit crimes. Such laws make things worse for
the assaulted and better for the assailants; they serve rather to encourage
than prevent homicides, for an unarmed man may be attacked with greater
confidence than an armed one."
Thomas Jefferson

On Sun, Apr 22, 2018 at 1:07 PM, Jeff Kennison <kennisonjeff at gmail.com>
wrote:

> Just purchased Rasberry Pi3 and loaded OS. Im new to Allstar and am in
> need of someone  to walk me thru the setup of software.
> Thank You
> Jeff Kennison
> kennisonjeff at gmail.com
> WB6IZC
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180426/95f3f867/attachment.html>

From kennisonjeff at gmail.com  Thu Apr 26 22:54:26 2018
From: kennisonjeff at gmail.com (Jeff Kennison)
Date: Thu, 26 Apr 2018 15:54:26 -0700
Subject: [App_rpt-users] Rasberry Pi3
In-Reply-To: <CAH4RvbLnqKT0o7_GTvzfWR0Vj17Y9Gm8_8mjKG9Lnp1DxGLYfw@mail.gmail.com>
References: <CA+3Rj6J1Y_wQ-fQRMZcbVpZ7M5PyjjsdUZTRV_-t=ud5BKtvVA@mail.gmail.com>
 <CAH4RvbLnqKT0o7_GTvzfWR0Vj17Y9Gm8_8mjKG9Lnp1DxGLYfw@mail.gmail.com>
Message-ID: <CA+3Rj6JZSnsjBg2o09t9X8o5X=7R7Sp0VCNMMmu5vxwn3dnovA@mail.gmail.com>

Yes thank you. Got Rasberry up and working with iaxrpt  Still need to get a
connection to Arcom Repeater as my signalink does not work.
Jeff
WB6IZC

On Thu, Apr 26, 2018 at 1:13 PM, David Shaw <shawpbx at gmail.com> wrote:

> Hello Jeff, Did you ever get help?
>
> David
>
>
>
> --
> Thanks, David
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
> Thomas Jefferson
>
> On Sun, Apr 22, 2018 at 1:07 PM, Jeff Kennison <kennisonjeff at gmail.com>
> wrote:
>
>> Just purchased Rasberry Pi3 and loaded OS. Im new to Allstar and am in
>> need of someone  to walk me thru the setup of software.
>> Thank You
>> Jeff Kennison
>> kennisonjeff at gmail.com
>> WB6IZC
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180426/6a99e9f6/attachment.html>

From kennisonjeff at gmail.com  Thu Apr 26 23:00:56 2018
From: kennisonjeff at gmail.com (Jeff)
Date: Thu, 26 Apr 2018 16:00:56 -0700
Subject: [App_rpt-users] Rasberry Pi3
In-Reply-To: <CAH4RvbLnqKT0o7_GTvzfWR0Vj17Y9Gm8_8mjKG9Lnp1DxGLYfw@mail.gmail.com>
References: <CA+3Rj6J1Y_wQ-fQRMZcbVpZ7M5PyjjsdUZTRV_-t=ud5BKtvVA@mail.gmail.com>
 <CAH4RvbLnqKT0o7_GTvzfWR0Vj17Y9Gm8_8mjKG9Lnp1DxGLYfw@mail.gmail.com>
Message-ID: <7D5FD9D1-5F89-4782-AAD2-BFEE4E32BDC6@gmail.com>

I have not been able to get in touch with George Gianios if you talk to him let him know I would like to purchase a few ideas from him. Perhaps my email is going to his spam
Jeff

Sent from my iPhone

> On Apr 26, 2018, at 1:13 PM, David Shaw <shawpbx at gmail.com> wrote:
> 
> Hello Jeff, Did you ever get help?
> 
> David
> 
> 
> 
> --
> Thanks, David
> 
> "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
> Thomas Jefferson
> 
>> On Sun, Apr 22, 2018 at 1:07 PM, Jeff Kennison <kennisonjeff at gmail.com> wrote:
>> Just purchased Rasberry Pi3 and loaded OS. Im new to Allstar and am in need of someone  to walk me thru the setup of software.
>> Thank You
>> Jeff Kennison
>> kennisonjeff at gmail.com
>> WB6IZC
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180426/2fbe7ea6/attachment.html>

From shawpbx at gmail.com  Fri Apr 27 15:33:47 2018
From: shawpbx at gmail.com (David Shaw)
Date: Fri, 27 Apr 2018 08:33:47 -0700
Subject: [App_rpt-users] Rasberry Pi3
In-Reply-To: <7D5FD9D1-5F89-4782-AAD2-BFEE4E32BDC6@gmail.com>
References: <CA+3Rj6J1Y_wQ-fQRMZcbVpZ7M5PyjjsdUZTRV_-t=ud5BKtvVA@mail.gmail.com>
 <CAH4RvbLnqKT0o7_GTvzfWR0Vj17Y9Gm8_8mjKG9Lnp1DxGLYfw@mail.gmail.com>
 <7D5FD9D1-5F89-4782-AAD2-BFEE4E32BDC6@gmail.com>
Message-ID: <CAH4RvbLcCZaJrJxOpJLTWRj=r-8kuxBDHQ8_wmaPdDisCGWS9g@mail.gmail.com>

Hello Jeff, I don't know  George Gianios. But what is the pinout of the
controller?

David



--
Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither
inclined nor determined to commit crimes. Such laws make things worse for
the assaulted and better for the assailants; they serve rather to encourage
than prevent homicides, for an unarmed man may be attacked with greater
confidence than an armed one."
Thomas Jefferson

On Thu, Apr 26, 2018 at 4:00 PM, Jeff <kennisonjeff at gmail.com> wrote:

> I have not been able to get in touch with George Gianios if you talk to
> him let him know I would like to purchase a few ideas from him. Perhaps my
> email is going to his spam
> Jeff
>
> Sent from my iPhone
>
> On Apr 26, 2018, at 1:13 PM, David Shaw <shawpbx at gmail.com> wrote:
>
> Hello Jeff, Did you ever get help?
>
> David
>
>
>
> --
> Thanks, David
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
> Thomas Jefferson
>
> On Sun, Apr 22, 2018 at 1:07 PM, Jeff Kennison <kennisonjeff at gmail.com>
> wrote:
>
>> Just purchased Rasberry Pi3 and loaded OS. Im new to Allstar and am in
>> need of someone  to walk me thru the setup of software.
>> Thank You
>> Jeff Kennison
>> kennisonjeff at gmail.com
>> WB6IZC
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180427/fbeece3e/attachment.html>

From Benjamin at Project23D.com  Sat Apr 28 03:48:19 2018
From: Benjamin at Project23D.com (Benjamin Naber)
Date: Fri, 27 Apr 2018 22:48:19 -0500
Subject: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
In-Reply-To: <20180423184456.9E4DD1E2241@morty.keekles.org>
References: <20180423142303.398E41E2241@morty.keekles.org>
 <191b5fc7-3f7f-e7dc-47ac-30485fc6b512@kuggie.com>
 <20180423144747.A13AA1E29FC@morty.keekles.org>
 <9a545e83-c6c0-62af-172b-083f96929747@kuggie.com>
 <8f1b33dd-78de-a7ac-9506-f7dda47dcacf@lusfiber.net>
 <CAC-Lcd-jQ2MFjNs_TTGOsquo51zZXKY3YDctuWM0Od1g2drJWw@mail.gmail.com>
 <7428d3be-e119-abdb-43de-d133cde6bcee@msgstor.com>
 <93c81491-6d37-8571-6233-de5f31d2ee39@yahoo.com>
 <20180423184456.9E4DD1E2241@morty.keekles.org>
Message-ID: <1524887299.2122.6.camel@Project23D.com>

I agree with Kevin.

He was very carefully not mentioning the RA-35 which is produced by a
company under his supervision, but I can!

The RA35 and it's successors are absolutely great products! They have a
 heartbeat monitor that magically ('cause I don't know how) monitor
asterisk, and kill the PTT enable if the RA-35 does not 'sense'
asterisk.

Before I made the switch to DIAL, I was using Limey Linux, the real
embedded solution that does not kill SD cards or care how many times
there are abrupt power "disconnects", it just works. 

Mind you, Limey came out and stopped being maintained *before* the
CM119 started to get used. But I wanted to see if it would work. In
this particular case either Limey or the thin client I was using did
not like the CM119 on the RA-35, and after a while, asterisk stopped
working... or something. Just so happened asterisk or something other
in the thin client USB hardware would die when I am in the middle of an
ASL conversation. The RA-35 did it's job, the heartbeat LED
extinguished and the node radio transmitted no more until I pulled the
power, and plugged the node back in.

A laptop with a whirly spinny thingy using DIAL and an RA-35, I'm care
free. Until *I* break it.


~Benjamin, KB9LFZ





From John at n2yp.com  Sun Apr 29 02:52:20 2018
From: John at n2yp.com (John Rudolph- N2YP)
Date: Sat, 28 Apr 2018 22:52:20 -0400
Subject: [App_rpt-users] Errors
Message-ID: <F405D071-964E-4C75-B085-1FE1BCAF4905@n2yp.com>

I have a multi node x86 ASL Asterisk 1.01 system up and running. Today I went to add a puesdo/dahdi hub and just made a additions to rpt.conf and iax.conf, and went and rebooted Asterisk and or the whole system and even though I love undone the "new" node the system is broke. My URI'S no longer get a heartbeat but show via lsusb, I can't access Asterisk CLI- get "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access radio-tune-menu - get "Error parsing device parameters", nodes no longer register with ASL, allmon2 can't access Asterisk manager, and my EchoLink node shows active but you can't access it. After multiple reboots I did try apt get update and upgrade with no success.  Dahdi and crc_ccitt show running and nothing shows in the asterisk log other than it starting the nodes.

What I don't understand is that I did nothing at all other than add a stanza for another node and uncomment that node number in iax.conf and restart. If someone could walk me through trouble shooting this I would appreciate it so I can learn what went wrong.
John Rudolph
Amateur Radio Op N2YP
Unadilla,NY
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180428/6ab69a2f/attachment.html>

From szingman at msgstor.com  Sun Apr 29 02:54:34 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Sat, 28 Apr 2018 22:54:34 -0400
Subject: [App_rpt-users] Errors
In-Reply-To: <F405D071-964E-4C75-B085-1FE1BCAF4905@n2yp.com>
References: <F405D071-964E-4C75-B085-1FE1BCAF4905@n2yp.com>
Message-ID: <91ffe40e-471a-101c-a0c2-4f22d6c9f9b8@msgstor.com>

Step 1:
Check the log for errors:
it is in /var/log/asterisk the filename is messages

Steve n4IRS

On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
> I have a multi node x86 ASL Asterisk 1.01 system up and running. Today 
> I went to add a puesdo/dahdi hub and just made a additions to rpt.conf 
> and iax.conf, and went and rebooted Asterisk and or the whole system 
> and even though I love undone the "new" node the system is broke. My 
> URI'S no longer get a heartbeat but show via lsusb, I can't access 
> Asterisk CLI- get "Unable to connect to remote asterisk (does 
> /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access 
> radio-tune-menu - get "Error parsing device parameters", nodes no 
> longer register with ASL, allmon2 can't access Asterisk manager, and 
> my EchoLink node shows active but you can't access it. After multiple 
> reboots I did try apt get update and upgrade with no success. Dahdi 
> and crc_ccitt show running and nothing shows in the asterisk log other 
> than it starting the nodes.
>
> What I don't understand is that I did nothing at all other than add a 
> stanza for another node and uncomment that node number in iax.conf and 
> restart. If someone could walk me through trouble shooting this I 
> would appreciate it so I can learn what went wrong.
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180428/fbc0d89c/attachment.html>

From tisawyer at gmail.com  Sun Apr 29 03:58:40 2018
From: tisawyer at gmail.com (Tim Sawyer)
Date: Sat, 28 Apr 2018 20:58:40 -0700
Subject: [App_rpt-users] Errors
In-Reply-To: <F405D071-964E-4C75-B085-1FE1BCAF4905@n2yp.com>
References: <F405D071-964E-4C75-B085-1FE1BCAF4905@n2yp.com>
Message-ID: <CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ@mail.gmail.com>

You probably fat fingered something. It happens to all of us. Start
Asterisk in the non-deamon mode by doing

asterisk -fnvvv

at the linux prompt and watch for errors. Press control-c to exit. Fix
error. Repeat until it starts clean.

On Sat, Apr 28, 2018 at 7:52 PM, John Rudolph- N2YP <John at n2yp.com> wrote:

> I have a multi node x86 ASL Asterisk 1.01 system up and running. Today I
> went to add a puesdo/dahdi hub and just made a additions to rpt.conf and
> iax.conf, and went and rebooted Asterisk and or the whole system and even
> though I love undone the "new" node the system is broke. My URI'S no longer
> get a heartbeat but show via lsusb, I can't access Asterisk CLI- get
> "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)"
> Yet this file does exist, Can't access radio-tune-menu - get "Error parsing
> device parameters", nodes no longer register with ASL, allmon2 can't access
> Asterisk manager, and my EchoLink node shows active but you can't access
> it. After multiple reboots I did try apt get update and upgrade with no
> success. Dahdi and crc_ccitt show running and nothing shows in the asterisk
> log other than it starting the nodes.
>
> What I don't understand is that I did nothing at all other than add a
> stanza for another node and uncomment that node number in iax.conf and
> restart. If someone could walk me through trouble shooting this I would
> appreciate it so I can learn what went wrong.
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180428/843503cb/attachment.html>

From smccarthy61 at gmail.com  Sun Apr 29 19:43:41 2018
From: smccarthy61 at gmail.com (Sean McCarthy)
Date: Sun, 29 Apr 2018 15:43:41 -0400
Subject: [App_rpt-users] Can't log in to node...
Message-ID: <CAHZM3ZNZ0PnrbF9jWH1z5ymKMsc7nBD97nxnTa+9Gb-=7XD2CQ@mail.gmail.com>

Trying to log into my link and keep getting this...

root at 192.168.43.141's password:
RPi2-3 Version 1.5rc4-18 Allstar - March 26, 2018 - KB4FXC, WA3DSP

Last login: Sun Apr 29 15:30:21 2018 from 192.168.43.212
/usr/local/sbin/admin.sh: line 65: syntax error near unexpected token `)'
/usr/local/sbin/admin.sh: line 65: `)'
Connection to 192.168.43.141 closed.

Any suggestions?

Thanks,
Sean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180429/1745f261/attachment.html>

From n3fe at repeater.net  Sun Apr 29 19:49:49 2018
From: n3fe at repeater.net (Corey Dean)
Date: Sun, 29 Apr 2018 15:49:49 -0400
Subject: [App_rpt-users] Can't log in to node...
In-Reply-To: <CAHZM3ZNZ0PnrbF9jWH1z5ymKMsc7nBD97nxnTa+9Gb-=7XD2CQ@mail.gmail.com>
References: <CAHZM3ZNZ0PnrbF9jWH1z5ymKMsc7nBD97nxnTa+9Gb-=7XD2CQ@mail.gmail.com>
Message-ID: <176DEB81-BB27-4F38-B9AE-8C53C95CCC84@repeater.net>

You might want to send that email to the other group as that isn?t the default allstar software....

Corey
N3FE

Sent from my iPhone

> On Apr 29, 2018, at 3:43 PM, Sean McCarthy <smccarthy61 at gmail.com> wrote:
> 
> Trying to log into my link and keep getting this...
> 
> root at 192.168.43.141's password:
> RPi2-3 Version 1.5rc4-18 Allstar - March 26, 2018 - KB4FXC, WA3DSP
> 
> Last login: Sun Apr 29 15:30:21 2018 from 192.168.43.212
> /usr/local/sbin/admin.sh: line 65: syntax error near unexpected token `)'
> /usr/local/sbin/admin.sh: line 65: `)'
> Connection to 192.168.43.141 closed.
> 
> Any suggestions?
> 
> Thanks,
> Sean
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180429/1f053de2/attachment.html>

From smccarthy61 at gmail.com  Sun Apr 29 19:52:45 2018
From: smccarthy61 at gmail.com (Sean McCarthy)
Date: Sun, 29 Apr 2018 15:52:45 -0400
Subject: [App_rpt-users] Can't log in to node...
In-Reply-To: <176DEB81-BB27-4F38-B9AE-8C53C95CCC84@repeater.net>
References: <CAHZM3ZNZ0PnrbF9jWH1z5ymKMsc7nBD97nxnTa+9Gb-=7XD2CQ@mail.gmail.com>
 <176DEB81-BB27-4F38-B9AE-8C53C95CCC84@repeater.net>
Message-ID: <CAHZM3ZO_v3i2xby-hqWADHcN=TPwVy0Y_4yQqSjVxC7i309o7g@mail.gmail.com>

My bad. Sorry.

On Sun, Apr 29, 2018 at 3:49 PM, Corey Dean <n3fe at repeater.net> wrote:

> You might want to send that email to the other group as that isn?t the
> default allstar software....
>
> Corey
> N3FE
>
> Sent from my iPhone
>
> On Apr 29, 2018, at 3:43 PM, Sean McCarthy <smccarthy61 at gmail.com> wrote:
>
> Trying to log into my link and keep getting this...
>
> root at 192.168.43.141's password:
> RPi2-3 Version 1.5rc4-18 Allstar - March 26, 2018 - KB4FXC, WA3DSP
>
> Last login: Sun Apr 29 15:30:21 2018 from 192.168.43.212
> /usr/local/sbin/admin.sh: line 65: syntax error near unexpected token `)'
> /usr/local/sbin/admin.sh: line 65: `)'
> Connection to 192.168.43.141 closed.
>
> Any suggestions?
>
> Thanks,
> Sean
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180429/ee6e4c9f/attachment.html>

From anthony.harwood at gmail.com  Sun Apr 29 20:10:07 2018
From: anthony.harwood at gmail.com (Anthony Harwood)
Date: Sun, 29 Apr 2018 15:10:07 -0500
Subject: [App_rpt-users] Can't log in to node...
In-Reply-To: <CAHZM3ZNZ0PnrbF9jWH1z5ymKMsc7nBD97nxnTa+9Gb-=7XD2CQ@mail.gmail.com>
References: <CAHZM3ZNZ0PnrbF9jWH1z5ymKMsc7nBD97nxnTa+9Gb-=7XD2CQ@mail.gmail.com>
Message-ID: <BAACDA97-6D1A-4BAA-9067-CDBB4A032067@gmail.com>


try using

ssh -t root at 192.168.43.141 <mailto:root at 192.168.43.141>  /bin/bash

if you need to specify your ssh port number specify it after the IP address





> On Apr 29, 2018, at 2:43 PM, Sean McCarthy <smccarthy61 at gmail.com> wrote:
> 
> Trying to log into my link and keep getting this...
> 
> root at 192.168.43.141 <mailto:root at 192.168.43.141>'s password:
> RPi2-3 Version 1.5rc4-18 Allstar - March 26, 2018 - KB4FXC, WA3DSP
> 
> Last login: Sun Apr 29 15:30:21 2018 from 192.168.43.212
> /usr/local/sbin/admin.sh: line 65: syntax error near unexpected token `)'
> /usr/local/sbin/admin.sh: line 65: `)'
> Connection to 192.168.43.141 closed.
> 
> Any suggestions?
> 
> Thanks,
> Sean
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180429/4534f3c0/attachment.html>

From smccarthy61 at gmail.com  Sun Apr 29 20:16:57 2018
From: smccarthy61 at gmail.com (Sean McCarthy)
Date: Sun, 29 Apr 2018 16:16:57 -0400
Subject: [App_rpt-users] Can't log in to node...
In-Reply-To: <BAACDA97-6D1A-4BAA-9067-CDBB4A032067@gmail.com>
References: <CAHZM3ZNZ0PnrbF9jWH1z5ymKMsc7nBD97nxnTa+9Gb-=7XD2CQ@mail.gmail.com>
 <BAACDA97-6D1A-4BAA-9067-CDBB4A032067@gmail.com>
Message-ID: <CAHZM3ZN9rp9Lb2XVwv+1fnBrip_5_iqH06Nou8U3Dsuj6n1MOw@mail.gmail.com>

Was a bad update that was fixed only hours later. I was one of the few that
updated in the window.

All fixed now.

Thanks


On Sun, Apr 29, 2018 at 4:10 PM, Anthony Harwood <anthony.harwood at gmail.com>
wrote:

>
> try using
>
> ssh -t root at 192.168.43.141  /bin/bash
>
> if you need to specify your ssh port number specify it after the IP address
>
>
>
>
>
> On Apr 29, 2018, at 2:43 PM, Sean McCarthy <smccarthy61 at gmail.com> wrote:
>
> Trying to log into my link and keep getting this...
>
> root at 192.168.43.141's password:
> RPi2-3 Version 1.5rc4-18 Allstar - March 26, 2018 - KB4FXC, WA3DSP
>
> Last login: Sun Apr 29 15:30:21 2018 from 192.168.43.212
> /usr/local/sbin/admin.sh: line 65: syntax error near unexpected token `)'
> /usr/local/sbin/admin.sh: line 65: `)'
> Connection to 192.168.43.141 closed.
>
> Any suggestions?
>
> Thanks,
> Sean
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180429/6fd0972a/attachment.html>

From John at n2yp.com  Sun Apr 29 20:27:28 2018
From: John at n2yp.com (John Rudolph- N2YP)
Date: Sun, 29 Apr 2018 16:27:28 -0400
Subject: [App_rpt-users] Errors
In-Reply-To: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
References: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
Message-ID: <B8A2F654-BC15-4A16-B2C3-86C56F090C8A@n2yp.com>

Steve, nothing is showing in the messages file other than what's below. The xpmr has been happening for a few weeks and I just haven't had a chance to ask about it yet.

[Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init  46101    
[Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init  46100    
_tune_usb_46100.conf not found, using default parameters.
[Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxlpf: 0
[Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxhpf: 0
[Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txlpf: 0
[Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txhpf: 0
[Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: 
John Rudolph
Amateur Radio Op N2YP
Unadilla,NY



>
>Step 1:
>Check the log for errors:
>it is in /var/log/asterisk the filename is messages
>
>Steve n4IRS
>
>On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
>> I have a multi node x86 ASL Asterisk 1.01 system up and running.
>Today 
>> I went to add a puesdo/dahdi hub and just made a additions to
>rpt.conf 
>> and iax.conf, and went and rebooted Asterisk and or the whole system 
>> and even though I love undone the "new" node the system is broke. My 
>> URI'S no longer get a heartbeat but show via lsusb, I can't access 
>> Asterisk CLI- get "Unable to connect to remote asterisk (does 
>> /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access
>
>> radio-tune-menu - get "Error parsing device parameters", nodes no 
>> longer register with ASL, allmon2 can't access Asterisk manager, and 
>> my EchoLink node shows active but you can't access it. After multiple
>
>> reboots I did try apt get update and upgrade with no success. Dahdi 
>> and crc_ccitt show running and nothing shows in the asterisk log
>other 
>> than it starting the nodes.
>>
>> What I don't understand is that I did nothing at all other than add a
>
>> stanza for another node and uncomment that node number in iax.conf
>and 
>> restart. If someone could walk me through trouble shooting this I 
>> would appreciate it so I can learn what went wrong.
>> John Rudolph
>> Amateur Radio Op N2YP
>> Unadilla,NY
>>
>>
>> _______________________________________________

>
>Message: 3
>Date: Sat, 28 Apr 2018 20:58:40 -0700
>From: Tim Sawyer <tisawyer at gmail.com>
>To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>Subject: Re: [App_rpt-users] Errors
>Message-ID:
>	<CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>You probably fat fingered something. It happens to all of us. Start
>Asterisk in the non-deamon mode by doing
>
>asterisk -fnvvv
>
>at the linux prompt and watch for errors. Press control-c to exit. Fix
>error. Repeat until it starts clean.
>


From szingman at msgstor.com  Sun Apr 29 20:39:25 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Sun, 29 Apr 2018 16:39:25 -0400
Subject: [App_rpt-users] Errors
In-Reply-To: <B8A2F654-BC15-4A16-B2C3-86C56F090C8A@n2yp.com>
References: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
 <B8A2F654-BC15-4A16-B2C3-86C56F090C8A@n2yp.com>
Message-ID: <1d20fbc9-d6df-f00b-c705-ed80b5aff251@msgstor.com>

and asterisk -r does not work?
if not, run asterisk in the foreground
asterisk -vcd
And paste the complete output.

On 04/29/2018 04:27 PM, John Rudolph- N2YP wrote:
> Steve, nothing is showing in the messages file other than what's below. The xpmr has been happening for a few weeks and I just haven't had a chance to ask about it yet.
>
> [Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init  46101
> [Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init  46100
> _tune_usb_46100.conf not found, using default parameters.
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxlpf: 0
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxhpf: 0
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txlpf: 0
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txhpf: 0
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c:
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
>
>
>
>> Step 1:
>> Check the log for errors:
>> it is in /var/log/asterisk the filename is messages
>>
>> Steve n4IRS
>>
>> On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
>>> I have a multi node x86 ASL Asterisk 1.01 system up and running.
>> Today
>>> I went to add a puesdo/dahdi hub and just made a additions to
>> rpt.conf
>>> and iax.conf, and went and rebooted Asterisk and or the whole system
>>> and even though I love undone the "new" node the system is broke. My
>>> URI'S no longer get a heartbeat but show via lsusb, I can't access
>>> Asterisk CLI- get "Unable to connect to remote asterisk (does
>>> /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access
>>> radio-tune-menu - get "Error parsing device parameters", nodes no
>>> longer register with ASL, allmon2 can't access Asterisk manager, and
>>> my EchoLink node shows active but you can't access it. After multiple
>>> reboots I did try apt get update and upgrade with no success. Dahdi
>>> and crc_ccitt show running and nothing shows in the asterisk log
>> other
>>> than it starting the nodes.
>>>
>>> What I don't understand is that I did nothing at all other than add a
>>> stanza for another node and uncomment that node number in iax.conf
>> and
>>> restart. If someone could walk me through trouble shooting this I
>>> would appreciate it so I can learn what went wrong.
>>> John Rudolph
>>> Amateur Radio Op N2YP
>>> Unadilla,NY
>>>
>>>
>>> _______________________________________________
>> Message: 3
>> Date: Sat, 28 Apr 2018 20:58:40 -0700
>> From: Tim Sawyer <tisawyer at gmail.com>
>> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>> Subject: Re: [App_rpt-users] Errors
>> Message-ID:
>> 	<CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> You probably fat fingered something. It happens to all of us. Start
>> Asterisk in the non-deamon mode by doing
>>
>> asterisk -fnvvv
>>
>> at the linux prompt and watch for errors. Press control-c to exit. Fix
>> error. Repeat until it starts clean.
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



From John at n2yp.com  Sun Apr 29 21:59:51 2018
From: John at n2yp.com (John Rudolph- N2YP)
Date: Sun, 29 Apr 2018 17:59:51 -0400
Subject: [App_rpt-users] Errors
In-Reply-To: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
References: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
Message-ID: <F373E256-277D-4EEF-B103-4087DEFEE663@n2yp.com>

Tim when running the command as suggested here is what I get.

AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version 004b9dd
Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others.
Created by Mark Spencer <markster at digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Asterisk Event Logger Started /var/log/asterisk/event_log
Asterisk Dynamic Loader Starting:
[Apr 29 17:50:16] NOTICE[27387]: dnsmgr.c:394 do_reload: Managed DNS entries will be refreshed every 300 seconds.
  == Manager registered action Ping
  == Manager registered action Events
  == Manager registered action Logoff
  == Manager registered action Hangup
  == Manager registered action Status
  == Manager registered action Setvar
  == Manager registered action Getvar
  == Manager registered action GetConfig
  == Manager registered action UpdateConfig
  == Manager registered action Redirect
  == Manager registered action Originate
  == Manager registered action Command
  == Manager registered action ExtensionState
  == Manager registered action AbsoluteTimeout
  == Manager registered action MailboxStatus
  == Manager registered action MailboxCount
  == Manager registered action ListCommands
  == Manager registered action UserEvent
  == Manager registered action WaitEvent
Asterisk Management interface listening on port 5038
[Apr 29 17:50:16] NOTICE[27387]: cdr.c:1416 do_reload: CDR simple logging enabled.
  == RTP Allocating from port range 5000 -> 31000
  == UDPTL allocating from port range 4500 -> 4999
Asterisk PBX Core Initializing
Registering builtin applications:
 [Answer]
  == Registered application 'Answer'
 [BackGround]
  == Registered application 'BackGround'
 [Busy]
  == Registered application 'Busy'
 [Congestion]
  == Registered application 'Congestion'
 [Goto]
  == Registered application 'Goto'
 [GotoIf]
  == Registered application 'GotoIf'
 [GotoIfTime]
  == Registered application 'GotoIfTime'
 [ExecIfTime]
  == Registered application 'ExecIfTime'
 [Hangup]
  == Registered application 'Hangup'
 [NoOp]
  == Registered application 'NoOp'
 [Progress]
  == Registered application 'Progress'
 [ResetCDR]
  == Registered application 'ResetCDR'
 [Ringing]
  == Registered application 'Ringing'
 [SayNumber]
  == Registered application 'SayNumber'
 [SayDigits]
  == Registered application 'SayDigits'
 [SayAlpha]
  == Registered application 'SayAlpha'
 [SayPhonetic]
  == Registered application 'SayPhonetic'
 [SetAMAFlags]
  == Registered application 'SetAMAFlags'
 [SetGlobalVar]
  == Registered application 'SetGlobalVar'
 [Set]
  == Registered application 'Set'
 [ImportVar]
  == Registered application 'ImportVar'
 [Wait]
  == Registered application 'Wait'
 [WaitExten]
  == Registered application 'WaitExten'
  == Manager registered action DBGet
  == Manager registered action DBPut
Asterisk Dynamic Loader Starting:
[Apr 29 17:50:16] NOTICE[27387]: loader.c:874 load_modules: 57 modules will be loaded.
res_adsi.so => (ADSI Resource)
    -- Loaded PUBLIC key 'freeworlddialup'
    -- Loaded PUBLIC key 'iaxtel'
    -- Loaded PUBLIC key 'allstar'
res_crypto.so => (Cryptographic Digital Signatures)
    -- Registered extension context 'parkedcalls'
    -- Added extension '700' priority 1 to parkedcalls
  == Registered application 'ParkedCall'
  == Registered application 'Park'
  == Manager registered action ParkedCalls
  == Manager registered action Park
res_features.so => (Call Features Resource)
    -- Registered indication country 'us'
    -- Registered indication country 'au'
    -- Registered indication country 'fr'
    -- Registered indication country 'de'
    -- Registered indication country 'nl'
    -- Registered indication country 'uk'
    -- Registered indication country 'fi'
    -- Registered indication country 'no'
    -- Setting default indication country to 'us'
  == Registered application 'PlayTones'
  == Registered application 'StopPlayTones'
res_indications.so => (Indications Resource)
  == Registered application 'Authenticate'
app_authenticate.so => (Authentication Application)
  == Registered application 'Dial'
  == Registered application 'RetryDial'
app_dial.so => (Dialing Application)
  == Registered application 'Exec'
  == Registered application 'TryExec'
  == Registered application 'ExecIf'
app_exec.so => (Executes dialplan applications)
  == Registered application 'MacroExit'
  == Registered application 'MacroIf'
  == Registered application 'MacroExclusive'
  == Registered application 'Macro'
app_macro.so => (Extension Macros)
  == Registered application 'Playback'
app_playback.so => (Sound File Playback Application)
  == Manager registered action RptLocalNodes
  == Manager registered action RptStatus
  == Registered application 'Rpt'
  == Registered application 'MDC1200Gen'
app_rpt.so => (Radio Repeater/Remote Base Application)
  == Registered application 'SendText'
app_sendtext.so => (Send Text Applications)
  == Registered application 'TrySystem'
  == Registered application 'System'
app_system.so => (Generic System() application)
  == Registered application 'Transfer'
app_transfer.so => (Transfer)
    -- Automatically generated pseudo channel
  == Registered channel type 'DAHDI' (DAHDI Telephony Driver)
  == Manager registered action DAHDITransfer
  == Manager registered action ZapTransfer
  == Manager registered action DAHDIHangup
  == Manager registered action ZapHangup
  == Manager registered action DAHDIDialOffHook
  == Manager registered action ZapDialOffHook
  == Manager registered action DAHDIDNDon
  == Manager registered action ZapDNDon
  == Manager registered action DAHDIDNDoff
  == Manager registered action ZapDNDoff
  == Manager registered action DAHDIShowChannels
  == Manager registered action ZapShowChannels
  == Manager registered action DAHDIRestart
  == Manager registered action ZapRestart
chan_dahdi.so => (DAHDI Telephony)
  == Registered channel type 'echolink' (Echolink channel driver)
chan_echolink.so => (echolink channel driver)
  == Registered custom function IAXPEER
  == Registered application 'IAX2Provision'
  == Manager registered action IAXpeers
  == Manager registered action IAXnetstats
  == Refreshing DNS lookups.
  == adding dns manager for 'register.allstarlink.org'
  == adding dns manager for 'register.allstarlink.org'
  == adding dns manager for 'register.allstarlink.org'
  == adding dns manager for 'register.allstarlink.org'
  == adding dns manager for 'register.allstarlink.org'
  == Using TOS bits 30
  == Binding IAX2 to default address 0.0.0.0:4569
  == Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2))
  == 10 helper threads started
  == IAX Ready and Listening
  == Loaded firmware 'iaxy.bin'
chan_iax2.so => (Inter Asterisk eXchange (Ver 2))
  == Registered channel type 'Local' (Local Proxy Channel Driver)
chan_local.so => (Local Proxy Channel (Note: used internally by other modules))
    -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting

    -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting

    -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting

    -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting

    -- Registered IAX2 to '67.215.233.178', who sees us as 104.228.103.221:4569 with no messages waiting

[Apr 29 17:50:17] WARNING[27387]: chan_usbradio.c:5377 store_config: File usbradio_tune_usb_46100.conf not found, using default parameters.
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1774 createPmrChannel: xpmr rxlpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1775 createPmrChannel: xpmr rxhpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1776 createPmrChannel: xpmr txlpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1777 createPmrChannel: xpmr txhpf: 0
ERROR: numrxcodes != numtxcodes
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1774 createPmrChannel: xpmr rxlpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1775 createPmrChannel: xpmr rxhpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1776 createPmrChannel: xpmr txlpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1777 createPmrChannel: xpmr txhpf: 0
ERROR: numrxcodes != numtxcodes
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1774 createPmrChannel: xpmr rxlpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1775 createPmrChannel: xpmr rxhpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1776 createPmrChannel: xpmr txlpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1777 createPmrChannel: xpmr txhpf: 0
ERROR: numrxcodes != numtxcodes
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1774 createPmrChannel: xpmr rxlpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1775 createPmrChannel: xpmr rxhpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1776 createPmrChannel: xpmr txlpf: 0
[Apr 29 17:50:17] NOTICE[27387]: ./xpmr/xpmr.c:1777 createPmrChannel: xpmr txhpf: 0
ERROR: numrxcodes != numtxcodes
  == Registered channel type 'Radio' (USB (CM108) Radio Channel Driver)
chan_usbradio.so => (usb Console Channel Driver)
  == Registered translator 'adpcmtolin' from format adpcm to slin, cost 1
  == Registered translator 'lintoadpcm' from format slin to adpcm, cost 1
codec_adpcm.so => (Adaptive Differential PCM Coder/Decoder)
  == Registered translator 'alawtolin' from format alaw to slin, cost 1
  == Registered translator 'lintoalaw' from format slin to alaw, cost 1
codec_alaw.so => (A-law Coder/Decoder)
  == Registered translator 'alawtoulaw' from format alaw to ulaw, cost 1
  == Registered translator 'ulawtoalaw' from format ulaw to alaw, cost 1
codec_a_mu.so => (A-law and Mulaw direct Coder/Decoder)
  == Registered translator 'g722tolin' from format g722 to slin, cost 1
  == Registered translator 'lintog722' from format slin to g722, cost 1
codec_g722.so => (ITU G.722-64kbps G722 Transcoder)
  == Registered translator 'g726tolin' from format g726 to slin, cost 1
  == Registered translator 'lintog726' from format slin to g726, cost 1
  == Registered translator 'g726aal2tolin' from format g726aal2 to slin, cost 1
  == Registered translator 'lintog726aal2' from format slin to g726aal2, cost 1
  == Registered translator 'g726aal2tog726' from format g726aal2 to g726, cost 1
  == Registered translator 'g726tog726aal2' from format g726 to g726aal2, cost 1
codec_g726.so => (ITU G.726-32kbps G726 Transcoder)
  == Registered translator 'gsmtolin' from format gsm to slin, cost 1
  == Registered translator 'lintogsm' from format slin to gsm, cost 1
codec_gsm.so => (GSM Coder/Decoder)
  == Registered translator 'ulawtolin' from format ulaw to slin, cost 1
  == Registered translator 'lintoulaw' from format slin to ulaw, cost 1
codec_ulaw.so => (mu-Law Coder/Decoder)
  == Registered translator 'ilbctolin' from format ilbc to slin, cost 3
  == Registered translator 'lintoilbc' from format slin to ilbc, cost 6
codec_ilbc.so => (iLBC Coder/Decoder)
  == Registered file format g723sf, extension(s) g723|g723sf
format_g723.so => (G.723.1 Simple Timestamp File Format)
  == Registered file format g726-40, extension(s) g726-40
  == Registered file format g726-32, extension(s) g726-32
  == Registered file format g726-24, extension(s) g726-24
  == Registered file format g726-16, extension(s) g726-16
format_g726.so => (Raw G.726 (16/24/32/40kbps) data)
  == Registered file format g729, extension(s) g729
format_g729.so => (Raw G729 data)
  == Registered file format gsm, extension(s) gsm
format_gsm.so => (Raw GSM data)
  == Registered file format h263, extension(s) h263
format_h263.so => (Raw H.263 data)
  == Registered file format h264, extension(s) h264
format_h264.so => (Raw H.264 data)
  == Registered file format iLBC, extension(s) ilbc
format_ilbc.so => (Raw iLBC data)
  == Registered file format pcm, extension(s) pcm|ulaw|ul|mu
  == Registered file format alaw, extension(s) alaw|al
  == Registered file format au, extension(s) au
  == Registered file format g722, extension(s) g722
format_pcm.so => (Raw/Sun uLaw/ALaw 8KHz (PCM,PCMA,AU), G.722 16Khz)
  == Registered file format sln, extension(s) sln|raw
format_sln.so => (Raw Signed Linear Audio support (SLN))
  == Registered file format vox, extension(s) vox
format_vox.so => (Dialogic VOX (ADPCM) File Format)
  == Registered file format wav49, extension(s) WAV|wav49
format_wav_gsm.so => (Microsoft WAV format (Proprietary GSM))
  == Registered file format wav, extension(s) wav
format_wav.so => (Microsoft WAV format (8000Hz Signed Linear))
  == Registered custom function BASE64_ENCODE
  == Registered custom function BASE64_DECODE
func_base64.so => (base64 encode/decode dialplan functions)
  == Registered custom function CALLERID
func_callerid.so => (Caller ID related dialplan function)
  == Registered custom function CDR
func_cdr.so => (CDR dialplan function)
  == Registered custom function CHANNEL
func_channel.so => (Channel information dialplan function)
  == Registered custom function CURL
func_curl.so => (Load external URL)
  == Registered custom function CUT
  == Registered custom function SORT
func_cut.so => (Cut out information from a string)
  == Registered custom function DB
  == Registered custom function DB_EXISTS
  == Registered custom function DB_DELETE
func_db.so => (Database (astdb) related dialplan functions)
  == Registered custom function ENUMLOOKUP
  == Registered custom function TXTCIDNAME
func_enum.so => (ENUM related dialplan functions)
  == Registered custom function ENV
  == Registered custom function STAT
func_env.so => (Environment/filesystem dialplan functions)
  == Registered custom function GLOBAL
func_global.so => (Global variable dialplan functions)
  == Registered custom function GROUP_COUNT
  == Registered custom function GROUP_MATCH_COUNT
  == Registered custom function GROUP_LIST
  == Registered custom function GROUP
func_groupcount.so => (Channel group dialplan functions)
  == Registered custom function LANGUAGE
func_language.so => (Channel language dialplan function)
  == Registered custom function ISNULL
  == Registered custom function SET
  == Registered custom function EXISTS
  == Registered custom function IF
  == Registered custom function IFTIME
func_logic.so => (Logical dialplan functions)
  == Registered custom function MATH
func_math.so => (Mathematical dialplan function)
  == Registered custom function MD5
  == Registered custom function CHECK_MD5
func_md5.so => (MD5 digest dialplan functions)
  == Registered custom function MUSICCLASS
func_moh.so => (Music-on-hold dialplan function)
  == Registered custom function RAND
func_rand.so => (Random number dialplan function)
  == Registered custom function REALTIME
func_realtime.so => (Read/Write values from a RealTime repository)
  == Setting global variable 'HOMENPA' to '607'
    -- Registered extension context 'default'
    -- Added extension 'i' priority 1 to default
    -- Registered extension context 'radio-gui'
    -- Added extension '46100' priority 1 to radio-gui
    -- Added extension '46101' priority 1 to radio-gui
    -- Added extension '46109' priority 1 to radio-gui
    -- Added extension '46110' priority 1 to radio-gui
    -- Added extension '46111' priority 1 to radio-gui
    -- Added extension '46112' priority 1 to radio-gui
    -- Registered extension context 'radio-iaxrpt'
    -- Added extension '46100' priority 1 to radio-iaxrpt
    -- Added extension '46101' priority 1 to radio-iaxrpt
    -- Added extension '46109' priority 1 to radio-iaxrpt
    -- Added extension '46110' priority 1 to radio-iaxrpt
    -- Added extension '46111' priority 1 to radio-iaxrpt
    -- Added extension '46112' priority 1 to radio-iaxrpt
    -- Registered extension context 'radio-secure'
    -- Added extension '46100' priority 1 to radio-secure
    -- Added extension '46101' priority 1 to radio-secure
    -- Added extension '46109' priority 1 to radio-secure
    -- Added extension '46110' priority 1 to radio-secure
    -- Added extension '46111' priority 1 to radio-secure
    -- Added extension '46112' priority 1 to radio-secure
    -- Registered extension context 'radio-secure-proxy'
    -- Added extension '46100' priority 1 to radio-secure-proxy
    -- Added extension '46101' priority 1 to radio-secure-proxy
    -- Added extension '46109' priority 1 to radio-secure-proxy
    -- Added extension '46110' priority 1 to radio-secure-proxy
    -- Added extension '46111' priority 1 to radio-secure-proxy
    -- Added extension '46112' priority 1 to radio-secure-proxy
    -- Added extension '_0X.' priority 1 to radio-secure-proxy
    -- Registered extension context 'pstn-out'
    -- Added extension '_NXXNXXXXXX' priority 1 to pstn-out
    -- Added extension '_NXXNXXXXXX' priority 2 to pstn-out
    -- Registered extension context 'invalidnum'
    -- Added extension 's' priority 1 to invalidnum
    -- Added extension 's' priority 2 to invalidnum
    -- Added extension 's' priority 3 to invalidnum
    -- Added extension 's' priority 4 to invalidnum
    -- Registered extension context 'radio'
    -- Added extension '_X11' priority 1 to radio
    -- Added extension '_NXXXXXX' priority 1 to radio
    -- Added extension '_1XXXXXXXXXX' priority 1 to radio
    -- Added extension '_07XX' priority 1 to radio
    -- Added extension '00' priority 1 to radio
    -- Registered extension context 'check_route'
    -- Added extension '_1800NXXXXXX' priority 2 to check_route
    -- Added extension '_1888NXXXXXX' priority 2 to check_route
    -- Added extension '_1877NXXXXXX' priority 2 to check_route
    -- Added extension '_1866NXXXXXX' priority 2 to check_route
    -- Added extension '_1855NXXXXXX' priority 2 to check_route
    -- Added extension '_1X00XXXXXXX' priority 2 to check_route
    -- Added extension '_1X11XXXXXXX' priority 2 to check_route
    -- Added extension '_X11' priority 2 to check_route
    -- Added extension '_1NXX555XXXX' priority 2 to check_route
    -- Added extension '_1NXX976XXXX' priority 2 to check_route
    -- Added extension '_1809XXXXXXX' priority 2 to check_route
    -- Added extension '_1900XXXXXXX' priority 2 to check_route
    -- Added extension '_1NXXXXXXXXX' priority 1 to check_route
    -- Added extension '_X.' priority 2 to check_route
    -- Registered extension context 'my-ip'
    -- Added extension 's' priority 1 to my-ip
    -- Added extension 's' priority 2 to my-ip
    -- Added extension 's' priority 3 to my-ip
    -- Added extension 's' priority 4 to my-ip
    -- Registered extension context 'allstar-sys'
    -- Added extension '0' priority 1 to allstar-sys
    -- Added extension '0' priority 2 to allstar-sys
    -- Added extension '0' priority 3 to allstar-sys
    -- Added extension '_0.' priority 1 to allstar-sys
    -- Added extension '_0.' priority 2 to allstar-sys
    -- Added extension '_0.' priority 3 to allstar-sys
    -- Added extension '_1.' priority 1 to allstar-sys
    -- Added extension '_1.' priority 2 to allstar-sys
    -- Added extension '_2.' priority 1 to allstar-sys
    -- Added extension '_2.' priority 2 to allstar-sys
    -- Added extension '_2.' priority 3 to allstar-sys
    -- Added extension '_2.' priority 4 to allstar-sys
    -- Added extension '_2.' priority 5 to allstar-sys
    -- Added extension '_2.' priority 6 to allstar-sys
    -- Added extension '_2.' priority 7 to allstar-sys
    -- Added extension '_3.' priority 1 to allstar-sys
    -- Added extension '_3.' priority 2 to allstar-sys
    -- Added extension '_3.' priority 3 to allstar-sys
    -- Added extension '_3.' priority 4 to allstar-sys
    -- Added extension '_3.' priority 5 to allstar-sys
    -- Added extension '_3.' priority 6 to allstar-sys
    -- Added extension '_3.' priority 7 to allstar-sys
    -- Added extension '_4.' priority 1 to allstar-sys
    -- Added extension '_4.' priority 2 to allstar-sys
    -- Added extension '_4.' priority 3 to allstar-sys
    -- Added extension '_4.' priority 4 to allstar-sys
    -- Added extension '_4.' priority 5 to allstar-sys
    -- Added extension '_4.' priority 6 to allstar-sys
    -- Added extension '_4.' priority 7 to allstar-sys
    -- Added extension '_5.' priority 1 to allstar-sys
    -- Added extension '_5.' priority 2 to allstar-sys
    -- Added extension '_5.' priority 3 to allstar-sys
    -- Added extension '_5.' priority 4 to allstar-sys
    -- Added extension '_5.' priority 5 to allstar-sys
    -- Added extension '_5.' priority 6 to allstar-sys
    -- Added extension '_5.' priority 7 to allstar-sys
    -- Registered extension context 'allstar-public'
    -- Added extension 's' priority 1 to allstar-public
    -- Added extension 's' priority 2 to allstar-public
    -- Added extension 's' priority 3 to allstar-public
    -- Added extension 's' priority 4 to allstar-public
    -- Added extension 's' priority 5 to allstar-public
    -- Added extension 's' priority 6 to allstar-public
    -- Added extension 's' priority 7 to allstar-public
    -- Added extension 's' priority 8 to allstar-public
    -- Added extension 's' priority 9 to allstar-public
    -- Added extension 's' priority 10 to allstar-public
    -- Added extension 's' priority 11 to allstar-public
    -- Added extension 's' priority 12 to allstar-public
    -- Added extension 's' priority 13 to allstar-public
    -- Added extension 's' priority 14 to allstar-public
    -- Added extension 's' priority 15 to allstar-public
    -- Added extension 's' priority 16 to allstar-public
    -- Added extension 's' priority 17 to allstar-public
    -- Added extension '9999' priority 1 to allstar-public
pbx_config.so => (Text Extension Configuration)
Asterisk Ready.
    -- Loading initial config for repeater 46101
[Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init  46101
    -- Loading initial config for repeater 46100
[Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init  46100
    -- Loading initial config for repeater 46101
[Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init  46101
    -- Loading initial config for repeater 46109
[Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init  46109
    -- Loading initial config for repeater 46110
[Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init  46110
    -- Loading initial config for repeater 46111
[Apr 29 17:50:17] NOTICE[27393]: app_rpt.c:22184 rpt_master: Normal Repeater Init  46111
    -- Re-Loading config for repeater 46111
ERROR: numrxcodes != numtxcodes
    -- rpt (Rx) initiating call to Radio/usb_46111 on Radio/usb_46111
    -- Re-Loading config for repeater 46109
    -- rpt (Rx) initiating call to dahdi/pseudo on DAHDI/pseudo-1054379203
    -- Re-Loading config for repeater 46101
ERROR: numrxcodes != numtxcodes
    -- rpt (Rx) initiating call to Radio/usb_46101 on Radio/usb_46101
    -- Re-Loading config for repeater 46110
    -- Re-Loading config for repeater 46100
ERROR: numrxcodes != numtxcodes
    -- rpt (Rx) initiating call to Radio/usb_46110 on Radio/usb_46110
    -- Re-Loading config for repeater 46101
ERROR: numrxcodes != numtxcodes
    -- rpt (Rx) initiating call to Radio/usb_46100 on Radio/usb_46100
Segmentation fault
John Rudolph
Amateur Radio Op N2YP
Unadilla,NY


On April 29, 2018 12:00:01 PM EDT, app_rpt-users-request at lists.allstarlink.org wrote:
>Send App_rpt-users mailing list submissions to
>	app_rpt-users at lists.allstarlink.org
>
>To subscribe or unsubscribe via the World Wide Web, visit
>	http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>or, via email, send a message with subject or body 'help' to
>	app_rpt-users-request at lists.allstarlink.org
>
>You can reach the person managing the list at
>	app_rpt-users-owner at lists.allstarlink.org
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of App_rpt-users digest..."
>
>This site is dedicated to the memory of Jim Dixon WB6NIL
>
>
>Today's Topics:
>
>   1. Errors (John Rudolph- N2YP)
>   2. Re: Errors (Steve Zingman)
>   3. Re: Errors (Tim Sawyer)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Sat, 28 Apr 2018 22:52:20 -0400
>From: John Rudolph- N2YP <John at n2yp.com>
>To: app_rpt-users at lists.allstarlink.org
>Subject: [App_rpt-users] Errors
>Message-ID: <F405D071-964E-4C75-B085-1FE1BCAF4905 at n2yp.com>
>Content-Type: text/plain; charset="utf-8"
>
>I have a multi node x86 ASL Asterisk 1.01 system up and running. Today
>I went to add a puesdo/dahdi hub and just made a additions to rpt.conf
>and iax.conf, and went and rebooted Asterisk and or the whole system
>and even though I love undone the "new" node the system is broke. My
>URI'S no longer get a heartbeat but show via lsusb, I can't access
>Asterisk CLI- get "Unable to connect to remote asterisk (does
>/var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access
>radio-tune-menu - get "Error parsing device parameters", nodes no
>longer register with ASL, allmon2 can't access Asterisk manager, and my
>EchoLink node shows active but you can't access it. After multiple
>reboots I did try apt get update and upgrade with no success.  Dahdi
>and crc_ccitt show running and nothing shows in the asterisk log other
>than it starting the nodes.
>
>What I don't understand is that I did nothing at all other than add a
>stanza for another node and uncomment that node number in iax.conf and
>restart. If someone could walk me through trouble shooting this I would
>appreciate it so I can learn what went wrong.
>John Rudolph
>Amateur Radio Op N2YP
>Unadilla,NY
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
><http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/6ab69a2f/attachment-0001.html>
>
>------------------------------
>
>Message: 2
>Date: Sat, 28 Apr 2018 22:54:34 -0400
>From: Steve Zingman <szingman at msgstor.com>
>To: app_rpt-users at lists.allstarlink.org
>Subject: Re: [App_rpt-users] Errors
>Message-ID: <91ffe40e-471a-101c-a0c2-4f22d6c9f9b8 at msgstor.com>
>Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
>Step 1:
>Check the log for errors:
>it is in /var/log/asterisk the filename is messages
>
>Steve n4IRS
>
>On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
>> I have a multi node x86 ASL Asterisk 1.01 system up and running.
>Today 
>> I went to add a puesdo/dahdi hub and just made a additions to
>rpt.conf 
>> and iax.conf, and went and rebooted Asterisk and or the whole system 
>> and even though I love undone the "new" node the system is broke. My 
>> URI'S no longer get a heartbeat but show via lsusb, I can't access 
>> Asterisk CLI- get "Unable to connect to remote asterisk (does 
>> /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access
>
>> radio-tune-menu - get "Error parsing device parameters", nodes no 
>> longer register with ASL, allmon2 can't access Asterisk manager, and 
>> my EchoLink node shows active but you can't access it. After multiple
>
>> reboots I did try apt get update and upgrade with no success. Dahdi 
>> and crc_ccitt show running and nothing shows in the asterisk log
>other 
>> than it starting the nodes.
>>
>> What I don't understand is that I did nothing at all other than add a
>
>> stanza for another node and uncomment that node number in iax.conf
>and 
>> restart. If someone could walk me through trouble shooting this I 
>> would appreciate it so I can learn what went wrong.
>> John Rudolph
>> Amateur Radio Op N2YP
>> Unadilla,NY
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>scroll down to the bottom of the page. Enter your email address and
>press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem.
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
><http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/fbc0d89c/attachment-0001.html>
>
>------------------------------
>
>Message: 3
>Date: Sat, 28 Apr 2018 20:58:40 -0700
>From: Tim Sawyer <tisawyer at gmail.com>
>To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>Subject: Re: [App_rpt-users] Errors
>Message-ID:
>	<CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>You probably fat fingered something. It happens to all of us. Start
>Asterisk in the non-deamon mode by doing
>
>asterisk -fnvvv
>
>at the linux prompt and watch for errors. Press control-c to exit. Fix
>error. Repeat until it starts clean.
>
>On Sat, Apr 28, 2018 at 7:52 PM, John Rudolph- N2YP <John at n2yp.com>
>wrote:
>
>> I have a multi node x86 ASL Asterisk 1.01 system up and running.
>Today I
>> went to add a puesdo/dahdi hub and just made a additions to rpt.conf
>and
>> iax.conf, and went and rebooted Asterisk and or the whole system and
>even
>> though I love undone the "new" node the system is broke. My URI'S no
>longer
>> get a heartbeat but show via lsusb, I can't access Asterisk CLI- get
>> "Unable to connect to remote asterisk (does /var/run/asterisk.ctl
>exist?)"
>> Yet this file does exist, Can't access radio-tune-menu - get "Error
>parsing
>> device parameters", nodes no longer register with ASL, allmon2 can't
>access
>> Asterisk manager, and my EchoLink node shows active but you can't
>access
>> it. After multiple reboots I did try apt get update and upgrade with
>no
>> success. Dahdi and crc_ccitt show running and nothing shows in the
>asterisk
>> log other than it starting the nodes.
>>
>> What I don't understand is that I did nothing at all other than add a
>> stanza for another node and uncomment that node number in iax.conf
>and
>> restart. If someone could walk me through trouble shooting this I
>would
>> appreciate it so I can learn what went wrong.
>> John Rudolph
>> Amateur Radio Op N2YP
>> Unadilla,NY
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>http://lists.allstarlink.org/
>> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom
>of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a
>message to
>> the list detailing the problem.
>>
>
>
>
>-- 
>Tim WD6AWP
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
><http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/843503cb/attachment-0001.html>
>
>------------------------------
>
>Subject: Digest Footer
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at lists.allstarlink.org
>http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>------------------------------
>
>End of App_rpt-users Digest, Vol 110, Issue 24
>**********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180429/e6f82d1c/attachment.html>

From szingman at msgstor.com  Sun Apr 29 22:03:14 2018
From: szingman at msgstor.com (Steve Zingman)
Date: Sun, 29 Apr 2018 18:03:14 -0400
Subject: [App_rpt-users] Errors
In-Reply-To: <F373E256-277D-4EEF-B103-4087DEFEE663@n2yp.com>
References: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
 <F373E256-277D-4EEF-B103-4087DEFEE663@n2yp.com>
Message-ID: <4255f84c-db61-c397-f9b5-602b46ae0214@msgstor.com>

Show us your usbradio.conf

On 04/29/2018 05:59 PM, John Rudolph- N2YP wrote:
> ERROR: numrxcodes != numtxcodes
> -- rpt (Rx) initiating call to Radio/usb_46100 on Radio/usb_46100
> Segmentation fault



From John at n2yp.com  Sun Apr 29 23:45:11 2018
From: John at n2yp.com (John Rudolph- N2YP)
Date: Sun, 29 Apr 2018 19:45:11 -0400
Subject: [App_rpt-users] Errors
In-Reply-To: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
References: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
Message-ID: <76A3531E-F4DA-48EB-B73E-144BCA1AF243@n2yp.com>

The issue has been found and fixed. I ended up with a duplicate stanza heading [46101] which broke everything apparently. Removed that and all is back to normal. I'm really surprised that that item broke so much.
John Rudolph
Amateur Radio Op N2YP
Unadilla,NY


On April 29, 2018 12:00:01 PM EDT, app_rpt-users-request at lists.allstarlink.org wrote:
>Send App_rpt-users mailing list submissions to
>	app_rpt-users at lists.allstarlink.org
>
>To subscribe or unsubscribe via the World Wide Web, visit
>	http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>or, via email, send a message with subject or body 'help' to
>	app_rpt-users-request at lists.allstarlink.org
>
>You can reach the person managing the list at
>	app_rpt-users-owner at lists.allstarlink.org
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of App_rpt-users digest..."
>
>This site is dedicated to the memory of Jim Dixon WB6NIL
>
>
>Today's Topics:
>
>   1. Errors (John Rudolph- N2YP)
>   2. Re: Errors (Steve Zingman)
>   3. Re: Errors (Tim Sawyer)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Sat, 28 Apr 2018 22:52:20 -0400
>From: John Rudolph- N2YP <John at n2yp.com>
>To: app_rpt-users at lists.allstarlink.org
>Subject: [App_rpt-users] Errors
>Message-ID: <F405D071-964E-4C75-B085-1FE1BCAF4905 at n2yp.com>
>Content-Type: text/plain; charset="utf-8"
>
>I have a multi node x86 ASL Asterisk 1.01 system up and running. Today
>I went to add a puesdo/dahdi hub and just made a additions to rpt.conf
>and iax.conf, and went and rebooted Asterisk and or the whole system
>and even though I love undone the "new" node the system is broke. My
>URI'S no longer get a heartbeat but show via lsusb, I can't access
>Asterisk CLI- get "Unable to connect to remote asterisk (does
>/var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access
>radio-tune-menu - get "Error parsing device parameters", nodes no
>longer register with ASL, allmon2 can't access Asterisk manager, and my
>EchoLink node shows active but you can't access it. After multiple
>reboots I did try apt get update and upgrade with no success.  Dahdi
>and crc_ccitt show running and nothing shows in the asterisk log other
>than it starting the nodes.
>
>What I don't understand is that I did nothing at all other than add a
>stanza for another node and uncomment that node number in iax.conf and
>restart. If someone could walk me through trouble shooting this I would
>appreciate it so I can learn what went wrong.
>John Rudolph
>Amateur Radio Op N2YP
>Unadilla,NY
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
><http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/6ab69a2f/attachment-0001.html>
>
>------------------------------
>
>Message: 2
>Date: Sat, 28 Apr 2018 22:54:34 -0400
>From: Steve Zingman <szingman at msgstor.com>
>To: app_rpt-users at lists.allstarlink.org
>Subject: Re: [App_rpt-users] Errors
>Message-ID: <91ffe40e-471a-101c-a0c2-4f22d6c9f9b8 at msgstor.com>
>Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
>Step 1:
>Check the log for errors:
>it is in /var/log/asterisk the filename is messages
>
>Steve n4IRS
>
>On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
>> I have a multi node x86 ASL Asterisk 1.01 system up and running.
>Today 
>> I went to add a puesdo/dahdi hub and just made a additions to
>rpt.conf 
>> and iax.conf, and went and rebooted Asterisk and or the whole system 
>> and even though I love undone the "new" node the system is broke. My 
>> URI'S no longer get a heartbeat but show via lsusb, I can't access 
>> Asterisk CLI- get "Unable to connect to remote asterisk (does 
>> /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access
>
>> radio-tune-menu - get "Error parsing device parameters", nodes no 
>> longer register with ASL, allmon2 can't access Asterisk manager, and 
>> my EchoLink node shows active but you can't access it. After multiple
>
>> reboots I did try apt get update and upgrade with no success. Dahdi 
>> and crc_ccitt show running and nothing shows in the asterisk log
>other 
>> than it starting the nodes.
>>
>> What I don't understand is that I did nothing at all other than add a
>
>> stanza for another node and uncomment that node number in iax.conf
>and 
>> restart. If someone could walk me through trouble shooting this I 
>> would appreciate it so I can learn what went wrong.
>> John Rudolph
>> Amateur Radio Op N2YP
>> Unadilla,NY
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>scroll down to the bottom of the page. Enter your email address and
>press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem.
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
><http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/fbc0d89c/attachment-0001.html>
>
>------------------------------
>
>Message: 3
>Date: Sat, 28 Apr 2018 20:58:40 -0700
>From: Tim Sawyer <tisawyer at gmail.com>
>To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>Subject: Re: [App_rpt-users] Errors
>Message-ID:
>	<CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>You probably fat fingered something. It happens to all of us. Start
>Asterisk in the non-deamon mode by doing
>
>asterisk -fnvvv
>
>at the linux prompt and watch for errors. Press control-c to exit. Fix
>error. Repeat until it starts clean.
>
>On Sat, Apr 28, 2018 at 7:52 PM, John Rudolph- N2YP <John at n2yp.com>
>wrote:
>
>> I have a multi node x86 ASL Asterisk 1.01 system up and running.
>Today I
>> went to add a puesdo/dahdi hub and just made a additions to rpt.conf
>and
>> iax.conf, and went and rebooted Asterisk and or the whole system and
>even
>> though I love undone the "new" node the system is broke. My URI'S no
>longer
>> get a heartbeat but show via lsusb, I can't access Asterisk CLI- get
>> "Unable to connect to remote asterisk (does /var/run/asterisk.ctl
>exist?)"
>> Yet this file does exist, Can't access radio-tune-menu - get "Error
>parsing
>> device parameters", nodes no longer register with ASL, allmon2 can't
>access
>> Asterisk manager, and my EchoLink node shows active but you can't
>access
>> it. After multiple reboots I did try apt get update and upgrade with
>no
>> success. Dahdi and crc_ccitt show running and nothing shows in the
>asterisk
>> log other than it starting the nodes.
>>
>> What I don't understand is that I did nothing at all other than add a
>> stanza for another node and uncomment that node number in iax.conf
>and
>> restart. If someone could walk me through trouble shooting this I
>would
>> appreciate it so I can learn what went wrong.
>> John Rudolph
>> Amateur Radio Op N2YP
>> Unadilla,NY
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>http://lists.allstarlink.org/
>> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom
>of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a
>message to
>> the list detailing the problem.
>>
>
>
>
>-- 
>Tim WD6AWP
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL:
><http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/843503cb/attachment-0001.html>
>
>------------------------------
>
>Subject: Digest Footer
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at lists.allstarlink.org
>http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>------------------------------
>
>End of App_rpt-users Digest, Vol 110, Issue 24
>**********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180429/add4b3cb/attachment.html>

From edpnjax at gmail.com  Sun Apr 29 23:56:00 2018
From: edpnjax at gmail.com (EDPnJAX)
Date: Sun, 29 Apr 2018 19:56:00 -0400
Subject: [App_rpt-users] Errors
In-Reply-To: <76A3531E-F4DA-48EB-B73E-144BCA1AF243@n2yp.com>
References: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
 <76A3531E-F4DA-48EB-B73E-144BCA1AF243@n2yp.com>
Message-ID: <88D9A93B-893F-4319-81ED-4D6D1F66760F@gmail.com>

Rule #1, ALWAYS make a backup copy of any config file you intend to modify.  No matter how unimportant, small or mundane you think the change is, make a copy in a safe directory before you change anything, that way you can always fall back to it if you have any doubts.


> On Apr 29, 2018, at 7:45 PM, John Rudolph- N2YP <John at n2yp.com> wrote:
> 
> The issue has been found and fixed. I ended up with a duplicate stanza heading [46101] which broke everything apparently. Removed that and all is back to normal. I'm really surprised that that item broke so much.
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
> 
> 
> On April 29, 2018 12:00:01 PM EDT, app_rpt-users-request at lists.allstarlink.org wrote:
> Send App_rpt-users mailing list submissions to
> 	app_rpt-users at lists.allstarlink.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> 	app_rpt-users-request at lists.allstarlink.org
> 
> You can reach the person managing the list at
> 	app_rpt-users-owner at lists.allstarlink.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
> 
> This site is dedicated to the memory of Jim Dixon WB6NIL
> 
> 
> Today's Topics:
> 
>    1. Errors (John Rudolph- N2YP)
>    2. Re: Errors (Steve Zingman)
>    3. Re: Errors (Tim Sawyer)
> Message: 1
> Date: Sat, 28 Apr 2018 22:52:20 -0400
> From: John Rudolph- N2YP <John at n2yp.com>
> To: app_rpt-users at lists.allstarlink.org
> Subject: [App_rpt-users] Errors
> Message-ID: <F405D071-964E-4C75-B085-1FE1BCAF4905 at n2yp.com>
> Content-Type: text/plain; charset="utf-8"
> 
> I have a multi node x86 ASL Asterisk 1.01 system up and running. Today I went to add a puesdo/dahdi hub and just made a additions to rpt.conf and iax.conf, and went and rebooted Asterisk and or the whole system and even though I love undone the "new" node the system is broke. My URI'S no longer get a heartbeat but show via lsusb, I can't access Asterisk CLI- get "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access radio-tune-menu - get "Error parsing device parameters", nodes no longer register with ASL, allmon2 can't access Asterisk manager, and my EchoLink node shows active but you can't access it. After multiple reboots I did try apt get update and upgrade with no success.  Dahdi and crc_ccitt show running and nothing shows in the asterisk log other than it starting the nodes.
> 
> What I don't understand is that I did nothing at all other than add a stanza for another node and uncomment that node number in iax.conf and restart. If someone could walk me through trouble shooting this I would appreciate it so I can learn what went wrong.
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/6ab69a2f/attachment-0001.html <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/6ab69a2f/attachment-0001.html>>
> Message: 2
> Date: Sat, 28 Apr 2018 22:54:34 -0400
> From: Steve Zingman <szingman at msgstor.com>
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] Errors
> Message-ID: <91ffe40e-471a-101c-a0c2-4f22d6c9f9b8 at msgstor.com>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
> 
> Step 1:
> Check the log for errors:
> it is in /var/log/asterisk the filename is messages
> 
> Steve n4IRS
> 
> On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
>  I have a multi node x86 ASL Asterisk 1.01 system up and running. Today 
>  I went to add a puesdo/dahdi hub and just made a additions to rpt.conf 
>  and iax.conf, and went and rebooted Asterisk and or the whole system 
>  and even though I love undone the "new" node the system is broke. My 
>  URI'S no longer get a heartbeat but show via lsusb, I can't access 
>  Asterisk CLI- get "Unable to connect to remote asterisk (does 
>  /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access 
>  radio-tune-menu - get "Error parsing device parameters", nodes no 
>  longer register with ASL, allmon2 can't access Asterisk manager, and 
>  my EchoLink node shows active but you can't access it. After multiple 
>  reboots I did try apt get update and upgrade with no success. Dahdi 
>  and crc_ccitt show running and nothing shows in the asterisk log other 
>  than it starting the nodes.
> 
>  What I don't understand is that I did nothing at all other than add a 
>  stanza for another node and uncomment that node number in iax.conf and 
>  restart. If someone could walk me through trouble shooting this I 
>  would appreciate it so I can learn what went wrong.
>  John Rudolph
>  Amateur Radio Op N2YP
>  Unadilla,NY
>  App_rpt-users mailing list
>  App_rpt-users at lists.allstarlink.org
>  http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
>  To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>  You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/fbc0d89c/attachment-0001.html <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/fbc0d89c/attachment-0001.html>>
> Message: 3
> Date: Sat, 28 Apr 2018 20:58:40 -0700
> From: Tim Sawyer <tisawyer at gmail.com>
> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> Subject: Re: [App_rpt-users] Errors
> Message-ID:
> 	<CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> You probably fat fingered something. It happens to all of us. Start
> Asterisk in the non-deamon mode by doing
> 
> asterisk -fnvvv
> 
> at the linux prompt and watch for errors. Press control-c to exit. Fix
> error. Repeat until it starts clean.
> 
> On Sat, Apr 28, 2018 at 7:52 PM, John Rudolph- N2YP <John at n2yp.com> wrote:
> 
>  I have a multi node x86 ASL Asterisk 1.01 system up and running. Today I
>  went to add a puesdo/dahdi hub and just made a additions to rpt.conf and
>  iax.conf, and went and rebooted Asterisk and or the whole system and even
>  though I love undone the "new" node the system is broke. My URI'S no longer
>  get a heartbeat but show via lsusb, I can't access Asterisk CLI- get
>  "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)"
>  Yet this file does exist, Can't access radio-tune-menu - get "Error parsing
>  device parameters", nodes no longer register with ASL, allmon2 can't access
>  Asterisk manager, and my EchoLink node shows active but you can't access
>  it. After multiple reboots I did try apt get update and upgrade with no
>  success. Dahdi and crc_ccitt show running and nothing shows in the asterisk
>  log other than it starting the nodes.
> 
>  What I don't understand is that I did nothing at all other than add a
>  stanza for another node and uncomment that node number in iax.conf and
>  restart. If someone could walk me through trouble shooting this I would
>  appreciate it so I can learn what went wrong.
>  John Rudolph
>  Amateur Radio Op N2YP
>  Unadilla,NY
>  App_rpt-users mailing list
>  App_rpt-users at lists.allstarlink.org
>  http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
>  To unsubscribe from this list please visit http://lists.allstarlink.org/ <http://lists.allstarlink.org/>
>  cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>  the page. Enter your email address and press the "Unsubscribe or edit
>  options button"
>  You do not need a password to unsubscribe, you can do it via email
>  confirmation. If you have trouble unsubscribing, please send a message to
>  the list detailing the problem.
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180429/4c1bd254/attachment.html>

From tisawyer at gmail.com  Mon Apr 30 04:10:55 2018
From: tisawyer at gmail.com (Tim Sawyer)
Date: Sun, 29 Apr 2018 21:10:55 -0700
Subject: [App_rpt-users] Errors
In-Reply-To: <88D9A93B-893F-4319-81ED-4D6D1F66760F@gmail.com>
References: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
 <76A3531E-F4DA-48EB-B73E-144BCA1AF243@n2yp.com>
 <88D9A93B-893F-4319-81ED-4D6D1F66760F@gmail.com>
Message-ID: <CAG3ht9vbb0ypb7=4c3H_LBXcziLvh+EgCL5XVTWLGWwui4oRAg@mail.gmail.com>

+1

On Sun, Apr 29, 2018 at 4:56 PM, EDPnJAX <edpnjax at gmail.com> wrote:

> Rule #1, ALWAYS make a backup copy of any config file you intend to
> modify.  No matter how unimportant, small or mundane you think the change
> is, make a copy in a safe directory before you change anything, that way
> you can always fall back to it if you have any doubts.
>
>
> On Apr 29, 2018, at 7:45 PM, John Rudolph- N2YP <John at n2yp.com> wrote:
>
> The issue has been found and fixed. I ended up with a duplicate stanza
> heading [46101] which broke everything apparently. Removed that and all is
> back to normal. I'm really surprised that that item broke so much.
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
>
>
> On April 29, 2018 12:00:01 PM EDT, app_rpt-users-request at lists.
> allstarlink.org wrote:
>>
>> Send App_rpt-users mailing list submissions to
>> 	app_rpt-users at lists.allstarlink.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> 	http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> or, via email, send a message with subject or body 'help' to
>> 	app_rpt-users-request at lists.allstarlink.org
>>
>> You can reach the person managing the list at
>> 	app_rpt-users-owner at lists.allstarlink.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of App_rpt-users digest..."
>>
>> This site is dedicated to the memory of Jim Dixon WB6NIL
>>
>>
>> Today's Topics:
>>
>>    1. Errors (John Rudolph- N2YP)
>>    2. Re: Errors (Steve Zingman)
>>    3. Re: Errors (Tim Sawyer)
>> ------------------------------
>> Message: 1
>> Date: Sat, 28 Apr 2018 22:52:20 -0400
>> From: John Rudolph- N2YP <John at n2yp.com>
>> To: app_rpt-users at lists.allstarlink.org
>> Subject: [App_rpt-users] Errors
>> Message-ID: <F405D071-964E-4C75-B085-1FE1BCAF4905 at n2yp.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I have a multi node x86 ASL Asterisk 1.01 system up and running. Today I went to add a puesdo/dahdi hub and just made a additions to rpt.conf and iax.conf, and went and rebooted Asterisk and or the whole system and even though I love undone the "new" node the system is broke. My URI'S no longer get a heartbeat but show via lsusb, I can't access Asterisk CLI- get "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access radio-tune-menu - get "Error parsing device parameters", nodes no longer register with ASL, allmon2 can't access Asterisk manager, and my EchoLink node shows active but you can't access it. After multiple reboots I did try apt get update and upgrade with no success.  Dahdi and crc_ccitt show running and nothing shows in the asterisk log other than it starting the nodes.
>>
>> What I don't understand is that I did nothing at all other than add a stanza for another node and uncomment that node number in iax.conf and restart. If someone could walk me through trouble shooting this I would appreciate it so I can learn what went wrong.
>> John Rudolph
>> Amateur Radio Op N2YP
>> Unadilla,NY
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/6ab69a2f/attachment-0001.html>
>> ------------------------------
>> Message: 2
>> Date: Sat, 28 Apr 2018 22:54:34 -0400
>> From: Steve Zingman <szingman at msgstor.com>
>> To: app_rpt-users at lists.allstarlink.org
>> Subject: Re: [App_rpt-users] Errors
>> Message-ID: <91ffe40e-471a-101c-a0c2-4f22d6c9f9b8 at msgstor.com>
>> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>>
>> Step 1:
>> Check the log for errors:
>> it is in /var/log/asterisk the filename is messages
>>
>> Steve n4IRS
>>
>> On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
>>
>>>  I have a multi node x86 ASL Asterisk 1.01 system up and running. Today
>>>  I went to add a puesdo/dahdi hub and just made a additions to rpt.conf
>>>  and iax.conf, and went and rebooted Asterisk and or the whole system
>>>  and even though I love undone the "new" node the system is broke. My
>>>  URI'S no longer get a heartbeat but show via lsusb, I can't access
>>>  Asterisk CLI- get "Unable to connect to remote asterisk (does
>>>  /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access
>>>  radio-tune-menu - get "Error parsing device parameters", nodes no
>>>  longer register with ASL, allmon2 can't access Asterisk manager, and
>>>  my EchoLink node shows active but you can't access it. After multiple
>>>  reboots I did try apt get update and upgrade with no success. Dahdi
>>>  and crc_ccitt show running and nothing shows in the asterisk log other
>>>  than it starting the nodes.
>>>
>>>  What I don't understand is that I did nothing at all other than add a
>>>  stanza for another node and uncomment that node number in iax.conf and
>>>  restart. If someone could walk me through trouble shooting this I
>>>  would appreciate it so I can learn what went wrong.
>>>  John Rudolph
>>>  Amateur Radio Op N2YP
>>>  Unadilla,NY
>>> ------------------------------
>>>  App_rpt-users mailing list
>>>  App_rpt-users at lists.allstarlink.org
>>>  http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>  To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>  You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20180428/fbc0d89c/attachment-0001.html>
>> ------------------------------
>> Message: 3
>> Date: Sat, 28 Apr 2018 20:58:40 -0700
>> From: Tim Sawyer <tisawyer at gmail.com>
>> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>> Subject: Re: [App_rpt-users] Errors
>> Message-ID:
>> 	<CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> You probably fat fingered something. It happens to all of us. Start
>> Asterisk in the non-deamon mode by doing
>>
>> asterisk -fnvvv
>>
>> at the linux prompt and watch for errors. Press control-c to exit. Fix
>> error. Repeat until it starts clean.
>>
>> On Sat, Apr 28, 2018 at 7:52 PM, John Rudolph- N2YP <John at n2yp.com> wrote:
>>
>>  I have a multi node x86 ASL Asterisk 1.01 system up and running. Today I
>>>  went to add a puesdo/dahdi hub and just made a additions to rpt.conf and
>>>  iax.conf, and went and rebooted Asterisk and or the whole system and even
>>>  though I love undone the "new" node the system is broke. My URI'S no longer
>>>  get a heartbeat but show via lsusb, I can't access Asterisk CLI- get
>>>  "Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)"
>>>  Yet this file does exist, Can't access radio-tune-menu - get "Error parsing
>>>  device parameters", nodes no longer register with ASL, allmon2 can't access
>>>  Asterisk manager, and my EchoLink node shows active but you can't access
>>>  it. After multiple reboots I did try apt get update and upgrade with no
>>>  success. Dahdi and crc_ccitt show running and nothing shows in the asterisk
>>>  log other than it starting the nodes.
>>>
>>>  What I don't understand is that I did nothing at all other than add a
>>>  stanza for another node and uncomment that node number in iax.conf and
>>>  restart. If someone could walk me through trouble shooting this I would
>>>  appreciate it so I can learn what went wrong.
>>>  John Rudolph
>>>  Amateur Radio Op N2YP
>>>  Unadilla,NY
>>> ------------------------------
>>>  App_rpt-users mailing list
>>>  App_rpt-users at lists.allstarlink.org
>>>  http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>  To unsubscribe from this list please visit http://lists.allstarlink.org/
>>>  cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>>>  the page. Enter your email address and press the "Unsubscribe or edit
>>>  options button"
>>>  You do not need a password to unsubscribe, you can do it via email
>>>  confirmation. If you have trouble unsubscribing, please send a message to
>>>  the list detailing the problem.
>>>
>>>
>>
>> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180429/78073af3/attachment.html>

From Benjamin at Project23D.com  Mon Apr 30 04:14:47 2018
From: Benjamin at Project23D.com (Benjamin Naber)
Date: Sun, 29 Apr 2018 23:14:47 -0500
Subject: [App_rpt-users] Errors
In-Reply-To: <76A3531E-F4DA-48EB-B73E-144BCA1AF243@n2yp.com>
References: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
 <76A3531E-F4DA-48EB-B73E-144BCA1AF243@n2yp.com>
Message-ID: <1525061687.2122.11.camel@Project23D.com>

John, et al:

Modules for a lack of better terms, on just about any program, look for
specific things in other modules.

If something is not correct, and causes issues, other modules will not
work, and some, very strange cryptic errors will be thrown when
debugging...... *IF* there is bug.

My vague-ness is intentional, as bugs are vast and varied... if the
issue is a bug, or user error.

To put it another way, let assume your car engine begins to misbehave.
There are MANY systems that must work in harmony for things to run
smoothly.

Something simple such as a failing fuel pressure damper will cause
cylinder misfires, rough idle, fuel smell, poor fuel economy. From the
onset of symptoms, there are many guesses as to what could cause the
evident issues... All those signs from ONE failing part.

Operational robustness is extremely hard to obtain.


~Benjamin, KB9LFZ




On Sun, 2018-04-29 at 19:45 -0400, John Rudolph- N2YP wrote:
> ..... I'm really surprised that that item broke so much.
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
> 
> 
> On April 29, 2018 12:00:01 PM EDT, app_rpt-users-request at lists.allsta
> rlink.org wrote:
> > Send App_rpt-users mailing list submissions to
> > 	app_rpt-users at lists.allstarlink.org
> > 
> > To subscribe or unsubscribe via the World Wide Web, visit
> > 	http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-u
> > sers
> > or, via email, send a message with subject or body 'help' to
> > 	app_rpt-users-request at lists.allstarlink.org
> > 
> > You can reach the person managing the list at
> > 	app_rpt-users-owner at lists.allstarlink.org
> > 
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of App_rpt-users digest..."
> > 
> > This site is dedicated to the memory of Jim Dixon WB6NIL
> > 
> > 
> > Today's Topics:
> > 
> > ???1. Errors (John Rudolph- N2YP)
> > ???2. Re: Errors (Steve Zingman)
> > ???3. Re: Errors (Tim Sawyer)
> > Message: 1
> > Date: Sat, 28 Apr 2018 22:52:20 -0400
> > From: John Rudolph- N2YP <John at n2yp.com>
> > To: app_rpt-users at lists.allstarlink.org
> > Subject: [App_rpt-users] Errors
> > Message-ID: <F405D071-964E-4C75-B085-1FE1BCAF4905 at n2yp.com>
> > Content-Type: text/plain; charset="utf-8"
> > 
> > I have a multi node x86 ASL Asterisk 1.01 system up and running.
> > Today I went to add a puesdo/dahdi hub and just made a additions to
> > rpt.conf and iax.conf, and went and rebooted Asterisk and or the
> > whole system and even though I love undone the "new" node the
> > system is broke. My URI'S no longer get a heartbeat but show via
> > lsusb, I can't access Asterisk CLI- get "Unable to connect to
> > remote asterisk (does /var/run/asterisk.ctl exist?)" Yet this file
> > does exist, Can't access radio-tune-menu - get "Error parsing
> > device parameters", nodes no longer register with ASL, allmon2
> > can't access Asterisk manager, and my EchoLink node shows active
> > but you can't access it. After multiple reboots I did try apt get
> > update and upgrade with no success.??Dahdi and crc_ccitt show
> > running and nothing shows in the asterisk log other than it
> > starting the nodes.
> > 
> > What I don't understand is that I did nothing at all other than add
> > a stanza for another node and uncomment that node number in
> > iax.conf and restart. If someone could walk me through trouble
> > shooting this I would appreciate it so I can learn what went wrong.
> > John Rudolph
> > Amateur Radio Op N2YP
> > Unadilla,NY
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachme
> > nts/20180428/6ab69a2f/attachment-0001.html>
> > Message: 2
> > Date: Sat, 28 Apr 2018 22:54:34 -0400
> > From: Steve Zingman <szingman at msgstor.com>
> > To: app_rpt-users at lists.allstarlink.org
> > Subject: Re: [App_rpt-users] Errors
> > Message-ID: <91ffe40e-471a-101c-a0c2-4f22d6c9f9b8 at msgstor.com>
> > Content-Type: text/plain; charset="utf-8"; Format="flowed"
> > 
> > Step 1:
> > Check the log for errors:
> > it is in /var/log/asterisk the filename is messages
> > 
> > Steve n4IRS
> > 
> > On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
> > > ?I have a multi node x86 ASL Asterisk 1.01 system up and running.
> > > Today?
> > > ?I went to add a puesdo/dahdi hub and just made a additions to
> > > rpt.conf?
> > > ?and iax.conf, and went and rebooted Asterisk and or the whole
> > > system?
> > > ?and even though I love undone the "new" node the system is
> > > broke. My?
> > > ?URI'S no longer get a heartbeat but show via lsusb, I can't
> > > access?
> > > ?Asterisk CLI- get "Unable to connect to remote asterisk (does?
> > > ?/var/run/asterisk.ctl exist?)" Yet this file does exist, Can't
> > > access?
> > > ?radio-tune-menu - get "Error parsing device parameters", nodes
> > > no?
> > > ?longer register with ASL, allmon2 can't access Asterisk manager,
> > > and?
> > > ?my EchoLink node shows active but you can't access it. After
> > > multiple?
> > > ?reboots I did try apt get update and upgrade with no success.
> > > Dahdi?
> > > ?and crc_ccitt show running and nothing shows in the asterisk log
> > > other?
> > > ?than it starting the nodes.
> > > 
> > > ?What I don't understand is that I did nothing at all other than
> > > add a?
> > > ?stanza for another node and uncomment that node number in
> > > iax.conf and?
> > > ?restart. If someone could walk me through trouble shooting this
> > > I?
> > > ?would appreciate it so I can learn what went wrong.
> > > ?John Rudolph
> > > ?Amateur Radio Op N2YP
> > > ?Unadilla,NY
> > > ?App_rpt-users mailing list
> > > ?App_rpt-users at lists.allstarlink.org
> > > ?http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-us
> > > ers
> > > 
> > > ?To unsubscribe from this list please visit http://lists.allstarl
> > > ink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> > > the bottom of the page. Enter your email address and press the
> > > "Unsubscribe or edit options button"
> > > ?You do not need a password to unsubscribe, you can do it via
> > > email confirmation. If you have trouble unsubscribing, please
> > > send a message to the list detailing the problem.
> > 
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachme
> > nts/20180428/fbc0d89c/attachment-0001.html>
> > Message: 3
> > Date: Sat, 28 Apr 2018 20:58:40 -0700
> > From: Tim Sawyer <tisawyer at gmail.com>
> > To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> > Subject: Re: [App_rpt-users] Errors
> > Message-ID:
> > 	<CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ at mail.gmail
> > .com>
> > Content-Type: text/plain; charset="utf-8"
> > 
> > You probably fat fingered something. It happens to all of us. Start
> > Asterisk in the non-deamon mode by doing
> > 
> > asterisk -fnvvv
> > 
> > at the linux prompt and watch for errors. Press control-c to exit.
> > Fix
> > error. Repeat until it starts clean.
> > 
> > On Sat, Apr 28, 2018 at 7:52 PM, John Rudolph- N2YP <John at n2yp.com>
> > wrote:
> > 
> > > ?I have a multi node x86 ASL Asterisk 1.01 system up and running.
> > > Today I
> > > ?went to add a puesdo/dahdi hub and just made a additions to
> > > rpt.conf and
> > > ?iax.conf, and went and rebooted Asterisk and or the whole system
> > > and even
> > > ?though I love undone the "new" node the system is broke. My
> > > URI'S no longer
> > > ?get a heartbeat but show via lsusb, I can't access Asterisk CLI-
> > > get
> > > ?"Unable to connect to remote asterisk (does
> > > /var/run/asterisk.ctl exist?)"
> > > ?Yet this file does exist, Can't access radio-tune-menu - get
> > > "Error parsing
> > > ?device parameters", nodes no longer register with ASL, allmon2
> > > can't access
> > > ?Asterisk manager, and my EchoLink node shows active but you
> > > can't access
> > > ?it. After multiple reboots I did try apt get update and upgrade
> > > with no
> > > ?success. Dahdi and crc_ccitt show running and nothing shows in
> > > the asterisk
> > > ?log other than it starting the nodes.
> > > 
> > > ?What I don't understand is that I did nothing at all other than
> > > add a
> > > ?stanza for another node and uncomment that node number in
> > > iax.conf and
> > > ?restart. If someone could walk me through trouble shooting this
> > > I would
> > > ?appreciate it so I can learn what went wrong.
> > > ?John Rudolph
> > > ?Amateur Radio Op N2YP
> > > ?Unadilla,NY
> > > ?App_rpt-users mailing list
> > > ?App_rpt-users at lists.allstarlink.org
> > > ?http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-us
> > > ers
> > > 
> > > ?To unsubscribe from this list please visit http://lists.allstarl
> > > ink.org/
> > > ?cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> > > bottom of
> > > ?the page. Enter your email address and press the "Unsubscribe or
> > > edit
> > > ?options button"
> > > ?You do not need a password to unsubscribe, you can do it via
> > > email
> > > ?confirmation. If you have trouble unsubscribing, please send a
> > > message to
> > > ?the list detailing the problem.
> > > 
> > 
> > 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.o
> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a
> message to the list detailing the problem.?


From anthony.harwood at gmail.com  Mon Apr 30 13:47:23 2018
From: anthony.harwood at gmail.com (Anthony Harwood)
Date: Mon, 30 Apr 2018 08:47:23 -0500
Subject: [App_rpt-users] Errors
In-Reply-To: <1525061687.2122.11.camel@Project23D.com>
References: <mailman.1.1525017601.29304.app_rpt-users@lists.allstarlink.org>
 <76A3531E-F4DA-48EB-B73E-144BCA1AF243@n2yp.com>
 <1525061687.2122.11.camel@Project23D.com>
Message-ID: <DA7FCA40-A9D0-44F2-8EBF-52CFE6770754@gmail.com>

Fault tolerance is a wonderful thing.



> On Apr 29, 2018, at 11:14 PM, Benjamin Naber <Benjamin at Project23D.com> wrote:
> 
> John, et al:
> 
> Modules for a lack of better terms, on just about any program, look for
> specific things in other modules.
> 
> If something is not correct, and causes issues, other modules will not
> work, and some, very strange cryptic errors will be thrown when
> debugging...... *IF* there is bug.
> 
> My vague-ness is intentional, as bugs are vast and varied... if the
> issue is a bug, or user error.
> 
> To put it another way, let assume your car engine begins to misbehave.
> There are MANY systems that must work in harmony for things to run
> smoothly.
> 
> Something simple such as a failing fuel pressure damper will cause
> cylinder misfires, rough idle, fuel smell, poor fuel economy. From the
> onset of symptoms, there are many guesses as to what could cause the
> evident issues... All those signs from ONE failing part.
> 
> Operational robustness is extremely hard to obtain.
> 
> 
> ~Benjamin, KB9LFZ
> 
> 
> 
> 
>> On Sun, 2018-04-29 at 19:45 -0400, John Rudolph- N2YP wrote:
>> ..... I'm really surprised that that item broke so much.
>> John Rudolph
>> Amateur Radio Op N2YP
>> Unadilla,NY
>> 
>> 
>> On April 29, 2018 12:00:01 PM EDT, app_rpt-users-request at lists.allsta
>> rlink.org wrote:
>>> Send App_rpt-users mailing list submissions to
>>>    app_rpt-users at lists.allstarlink.org
>>> 
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>    http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-u
>>> sers
>>> or, via email, send a message with subject or body 'help' to
>>>    app_rpt-users-request at lists.allstarlink.org
>>> 
>>> You can reach the person managing the list at
>>>    app_rpt-users-owner at lists.allstarlink.org
>>> 
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of App_rpt-users digest..."
>>> 
>>> This site is dedicated to the memory of Jim Dixon WB6NIL
>>> 
>>> 
>>> Today's Topics:
>>> 
>>>    1. Errors (John Rudolph- N2YP)
>>>    2. Re: Errors (Steve Zingman)
>>>    3. Re: Errors (Tim Sawyer)
>>> Message: 1
>>> Date: Sat, 28 Apr 2018 22:52:20 -0400
>>> From: John Rudolph- N2YP <John at n2yp.com>
>>> To: app_rpt-users at lists.allstarlink.org
>>> Subject: [App_rpt-users] Errors
>>> Message-ID: <F405D071-964E-4C75-B085-1FE1BCAF4905 at n2yp.com>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> I have a multi node x86 ASL Asterisk 1.01 system up and running.
>>> Today I went to add a puesdo/dahdi hub and just made a additions to
>>> rpt.conf and iax.conf, and went and rebooted Asterisk and or the
>>> whole system and even though I love undone the "new" node the
>>> system is broke. My URI'S no longer get a heartbeat but show via
>>> lsusb, I can't access Asterisk CLI- get "Unable to connect to
>>> remote asterisk (does /var/run/asterisk.ctl exist?)" Yet this file
>>> does exist, Can't access radio-tune-menu - get "Error parsing
>>> device parameters", nodes no longer register with ASL, allmon2
>>> can't access Asterisk manager, and my EchoLink node shows active
>>> but you can't access it. After multiple reboots I did try apt get
>>> update and upgrade with no success.  Dahdi and crc_ccitt show
>>> running and nothing shows in the asterisk log other than it
>>> starting the nodes.
>>> 
>>> What I don't understand is that I did nothing at all other than add
>>> a stanza for another node and uncomment that node number in
>>> iax.conf and restart. If someone could walk me through trouble
>>> shooting this I would appreciate it so I can learn what went wrong.
>>> John Rudolph
>>> Amateur Radio Op N2YP
>>> Unadilla,NY
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachme
>>> nts/20180428/6ab69a2f/attachment-0001.html>
>>> Message: 2
>>> Date: Sat, 28 Apr 2018 22:54:34 -0400
>>> From: Steve Zingman <szingman at msgstor.com>
>>> To: app_rpt-users at lists.allstarlink.org
>>> Subject: Re: [App_rpt-users] Errors
>>> Message-ID: <91ffe40e-471a-101c-a0c2-4f22d6c9f9b8 at msgstor.com>
>>> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>>> 
>>> Step 1:
>>> Check the log for errors:
>>> it is in /var/log/asterisk the filename is messages
>>> 
>>> Steve n4IRS
>>> 
>>>> On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
>>>>  I have a multi node x86 ASL Asterisk 1.01 system up and running.
>>>> Today 
>>>>  I went to add a puesdo/dahdi hub and just made a additions to
>>>> rpt.conf 
>>>>  and iax.conf, and went and rebooted Asterisk and or the whole
>>>> system 
>>>>  and even though I love undone the "new" node the system is
>>>> broke. My 
>>>>  URI'S no longer get a heartbeat but show via lsusb, I can't
>>>> access 
>>>>  Asterisk CLI- get "Unable to connect to remote asterisk (does 
>>>>  /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't
>>>> access 
>>>>  radio-tune-menu - get "Error parsing device parameters", nodes
>>>> no 
>>>>  longer register with ASL, allmon2 can't access Asterisk manager,
>>>> and 
>>>>  my EchoLink node shows active but you can't access it. After
>>>> multiple 
>>>>  reboots I did try apt get update and upgrade with no success.
>>>> Dahdi 
>>>>  and crc_ccitt show running and nothing shows in the asterisk log
>>>> other 
>>>>  than it starting the nodes.
>>>> 
>>>>  What I don't understand is that I did nothing at all other than
>>>> add a 
>>>>  stanza for another node and uncomment that node number in
>>>> iax.conf and 
>>>>  restart. If someone could walk me through trouble shooting this
>>>> I 
>>>>  would appreciate it so I can learn what went wrong.
>>>>  John Rudolph
>>>>  Amateur Radio Op N2YP
>>>>  Unadilla,NY
>>>>  App_rpt-users mailing list
>>>>  App_rpt-users at lists.allstarlink.org
>>>>  http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-us
>>>> ers
>>>> 
>>>>  To unsubscribe from this list please visit http://lists.allstarl
>>>> ink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
>>>> the bottom of the page. Enter your email address and press the
>>>> "Unsubscribe or edit options button"
>>>>  You do not need a password to unsubscribe, you can do it via
>>>> email confirmation. If you have trouble unsubscribing, please
>>>> send a message to the list detailing the problem.
>>> 
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachme
>>> nts/20180428/fbc0d89c/attachment-0001.html>
>>> Message: 3
>>> Date: Sat, 28 Apr 2018 20:58:40 -0700
>>> From: Tim Sawyer <tisawyer at gmail.com>
>>> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>>> Subject: Re: [App_rpt-users] Errors
>>> Message-ID:
>>>    <CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ at mail.gmail
>>> .com>
>>> Content-Type: text/plain; charset="utf-8"
>>> 
>>> You probably fat fingered something. It happens to all of us. Start
>>> Asterisk in the non-deamon mode by doing
>>> 
>>> asterisk -fnvvv
>>> 
>>> at the linux prompt and watch for errors. Press control-c to exit.
>>> Fix
>>> error. Repeat until it starts clean.
>>> 
>>> On Sat, Apr 28, 2018 at 7:52 PM, John Rudolph- N2YP <John at n2yp.com>
>>> wrote:
>>> 
>>>>  I have a multi node x86 ASL Asterisk 1.01 system up and running.
>>>> Today I
>>>>  went to add a puesdo/dahdi hub and just made a additions to
>>>> rpt.conf and
>>>>  iax.conf, and went and rebooted Asterisk and or the whole system
>>>> and even
>>>>  though I love undone the "new" node the system is broke. My
>>>> URI'S no longer
>>>>  get a heartbeat but show via lsusb, I can't access Asterisk CLI-
>>>> get
>>>>  "Unable to connect to remote asterisk (does
>>>> /var/run/asterisk.ctl exist?)"
>>>>  Yet this file does exist, Can't access radio-tune-menu - get
>>>> "Error parsing
>>>>  device parameters", nodes no longer register with ASL, allmon2
>>>> can't access
>>>>  Asterisk manager, and my EchoLink node shows active but you
>>>> can't access
>>>>  it. After multiple reboots I did try apt get update and upgrade
>>>> with no
>>>>  success. Dahdi and crc_ccitt show running and nothing shows in
>>>> the asterisk
>>>>  log other than it starting the nodes.
>>>> 
>>>>  What I don't understand is that I did nothing at all other than
>>>> add a
>>>>  stanza for another node and uncomment that node number in
>>>> iax.conf and
>>>>  restart. If someone could walk me through trouble shooting this
>>>> I would
>>>>  appreciate it so I can learn what went wrong.
>>>>  John Rudolph
>>>>  Amateur Radio Op N2YP
>>>>  Unadilla,NY
>>>>  App_rpt-users mailing list
>>>>  App_rpt-users at lists.allstarlink.org
>>>>  http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-us
>>>> ers
>>>> 
>>>>  To unsubscribe from this list please visit http://lists.allstarl
>>>> ink.org/
>>>>  cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>>>> bottom of
>>>>  the page. Enter your email address and press the "Unsubscribe or
>>>> edit
>>>>  options button"
>>>>  You do not need a password to unsubscribe, you can do it via
>>>> email
>>>>  confirmation. If you have trouble unsubscribing, please send a
>>>> message to
>>>>  the list detailing the problem.
>>>> 
>>> 
>>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.o
>> rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>> bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a
>> message to the list detailing the problem. 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.