[App_rpt-users] Adding public node setup to private node

[Bryan Taylor]

Got it, forgot to update port for private node on hub. I changed it back to 4569 to make registering on Allstar simpler. Forgot to update it in rpt.conf on hub. All good now working perfectly. Silly mistake thanks Tim.

Bryan
Vo1mxz
Sent from my iPhone

> On Mar 31, 2018, at 11:32 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
> 
> Do the private nodes key the public note and visa-visa, or is it only audio that is not working?
> 
>> On Sat, Mar 31, 2018 at 3:58 PM, Bryan Taylor <overnite at me.com> wrote:
>> 
>> Hey all,
>> 
>> Quick question hopefully. I have 15 private nodes connecting to a hub, on one of the private nodes i want to add public Allstar access using a public node I have setup on allstarlink.org. I have added a section to rpt.conf for the public node, added it’s ip address in the nodes section. The private node and public node will be on the same raspberry pi. Ports and all that stuff are setup, the simpleusb/rf side works perfectly.
>> 
>> I did not edit anything in the extensions.conf as radio-secure is using variables instead of hardcoded node numbers.  I also did not edit anything in simpleusb.conf as the public side is set to use dahdi/pseudo.
>> 
>> I also added the registration line and also enabled status reporting. I have the private node using a simplex setup, with one radio and one uri and using simpleusb.conf. I have the public node setup using dahdi/pseudo, I connect the public node to the hub and all seems well, the node shows up on allstarlink and is green, I can connect to it using the web transceiver.
>> However no audio ever gets passed through in or out. Seems it doesn’t receive anything and never sends anything.
>> 
>> Did I miss something? Do I need to add more details?
>> 
>> Thanks
>> Bryan
>> Vo1mxz
>> 
>> Sent from my iPhone
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> 
> 
> -- 
> Tim WD6AWP
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180401/6745cef6/attachment.html>