[App_rpt-users] EchoLink Server Stuck On

[Bob Pyke]

Figured it out... slow kid here. I was working on a replacement RPi, and it was running from my location, sending updates to EchoLink. (Sigh!)

Sorry for the confusion. Your CLI> instructions plus the EchoLink IP address info helped me converge on the problem... it was me all along.(grrr)

Thanks,
Bob
K6ECM
73


> On Apr 20, 2018, at 9:04 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
> 
> Just received a message from EchoLink who said they are still receiving intermittent info from my node.
> 
> Thanks,
> Bob
> K6ECM
> 73
> 
> 
>> On Apr 20, 2018, at 8:52 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
>> 
>> No EchoLink modules in the CL> list. The 4 “chan_” in the list are identified as “load” in modules.conf
>> 
>> So, does this mean the repeater is not contacting the EchoLink server?
>> 
>> Thanks,
>> Bob
>> K6ECM
>> 73
>> 
>> 
>>> On Apr 20, 2018, at 7:27 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>> 
>>> From the asterisk CLI>
>>> show modules like echo or
>>> show modules like chan
>>> Verify chan_echolink is not loaded.
>>> 
>>> Steve
>>> 
>>>> On 4/20/2018 10:09 AM, Bob Pyke wrote:
>>>> EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a “noload” state for over two days now, and the EchoLink website still shows our node as being a valid login. I’ve sent a service request in to EchoLink without response. My question is this, do I need to do more than “noload” the EchoLink module so the EchoLink server won’t see us as a login?
>>>> 
>>>> Thanks,
>>>> Bob
>>>> K6ECM
>>>> 
>>>> Sent from iPad
>>>> 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.