[App_rpt-users] Errors

[Steve Zingman]

and asterisk -r does not work?
if not, run asterisk in the foreground
asterisk -vcd
And paste the complete output.

On 04/29/2018 04:27 PM, John Rudolph- N2YP wrote:
> Steve, nothing is showing in the messages file other than what's below. The xpmr has been happening for a few weeks and I just haven't had a chance to ask about it yet.
>
> [Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init  46101
> [Apr 29 16:19:10] NOTICE[8850] app_rpt.c: Normal Repeater Init  46100
> _tune_usb_46100.conf not found, using default parameters.
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxlpf: 0
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr rxhpf: 0
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txlpf: 0
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c: xpmr txhpf: 0
> [Apr 29 16:19:09] NOTICE[8844] ./xpmr/xpmr.c:
> John Rudolph
> Amateur Radio Op N2YP
> Unadilla,NY
>
>
>
>> Step 1:
>> Check the log for errors:
>> it is in /var/log/asterisk the filename is messages
>>
>> Steve n4IRS
>>
>> On 04/28/2018 10:52 PM, John Rudolph- N2YP wrote:
>>> I have a multi node x86 ASL Asterisk 1.01 system up and running.
>> Today
>>> I went to add a puesdo/dahdi hub and just made a additions to
>> rpt.conf
>>> and iax.conf, and went and rebooted Asterisk and or the whole system
>>> and even though I love undone the "new" node the system is broke. My
>>> URI'S no longer get a heartbeat but show via lsusb, I can't access
>>> Asterisk CLI- get "Unable to connect to remote asterisk (does
>>> /var/run/asterisk.ctl exist?)" Yet this file does exist, Can't access
>>> radio-tune-menu - get "Error parsing device parameters", nodes no
>>> longer register with ASL, allmon2 can't access Asterisk manager, and
>>> my EchoLink node shows active but you can't access it. After multiple
>>> reboots I did try apt get update and upgrade with no success. Dahdi
>>> and crc_ccitt show running and nothing shows in the asterisk log
>> other
>>> than it starting the nodes.
>>>
>>> What I don't understand is that I did nothing at all other than add a
>>> stanza for another node and uncomment that node number in iax.conf
>> and
>>> restart. If someone could walk me through trouble shooting this I
>>> would appreciate it so I can learn what went wrong.
>>> John Rudolph
>>> Amateur Radio Op N2YP
>>> Unadilla,NY
>>>
>>>
>>> _______________________________________________
>> Message: 3
>> Date: Sat, 28 Apr 2018 20:58:40 -0700
>> From: Tim Sawyer <tisawyer at gmail.com>
>> To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
>> Subject: Re: [App_rpt-users] Errors
>> Message-ID:
>> 	<CAG3ht9trmThaNMPUrP6O3v-h-ZQZVCSs2=Kd2UiYZM_i9Tu6ZQ at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> You probably fat fingered something. It happens to all of us. Start
>> Asterisk in the non-deamon mode by doing
>>
>> asterisk -fnvvv
>>
>> at the linux prompt and watch for errors. Press control-c to exit. Fix
>> error. Repeat until it starts clean.
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.